The plain HTTP client used hyper's own connector on Linux and Windows,
which tries the other address family 300 ms in. Connecting through the
dial lost that, so a host with a broken IPv6 route took five seconds to
reach over IPv4. Plain HTTP now races the families the same way, within
the same 10 second budget; a CONNECT still dials its addresses in turn.
The timeout test no longer depends on how the network treats a
documentation address.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A plain HTTP request whose server can't be reached (the name doesn't
resolve, the port is closed, the host or network is unreachable, or
it times out) no longer gets a 502 page the engine made up. The
client's connection is reset unanswered, so the browser or app shows
its own connection error, as it would with no proxy, and the flow ends
as an error with the same plain reason a failed CONNECT gets.
The plain HTTP client now connects through the CONNECT dial, so it
shares its 10 second budget and its failure reasons. On macOS, when
Network.framework falls back to a local system proxy, the real cause
is found by looking the name up apart; the fallback wording goes to
the debug log only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine now opens the TCP connection to a CONNECT's server before it
answers. When the server can't be reached, the CONNECT gets a 502 (or a
504 on a timeout) and the client reports its own connection error, rather
than a 200 followed by a 502 inside the decrypted session or a silent
hang-up in a tunnel. The failure is recorded as one error flow.
The dialled connection is handed to the tunnel, or to the first upstream
connection of a decrypted one, so nothing is dialled twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A load that finishes at once flashed "Loading events..." for a frame or two
each time a streaming flow was selected. The message now shows only after the
load has run for 200ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Once an address is no longer passed through, the foot said the next
connection will be decrypted even when the list excludes it or the
certificate is untrusted. It now says so only when the list still
decrypts the connection, and keeps the trust line while untrusted.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Apply the approved wording table: labels stay short, explanations are one
full sentence about the user's traffic, and detail moves behind an info
icon on the first-run card, the body banners, the Settings Helper row and
the rejected card. One word per thing: traffic and flows, recorded,
truncated, domains, searches, the CLI, Retry.
Backend messages that reach the window change with them, with the tests
and harness fixtures that assert on the old text. The two working files
for the pass are removed from the branch.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
App icons keep their square however a long app name squeezes them, in the
card's buttons, the strip's Choose menu and the sidebar, and a long entry
hint truncates instead of the button's label. A connection nothing on the
list covers reads "Encrypted Content: Enable decryption to see requests
to <host>", with the host as code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No opacity on the app icon or the port; the host, number, size and time
take the subtle text colour, the faintest that keeps 4.5:1 on the row in
both default themes, and the full text colour while selected. The lock
takes the subtle colour too, and refused rows follow the same rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hosts, apps and entries named in the why and opened-before lines render
as InlineCode, an info button beside the why line explains decryption in
a tooltip, and the "New connections only" line is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Count Reconnect's connections within its own scope, refresh the
pass-through set from Try Again's answer, report a failed trust, keep
the pill's switch where the app can't trust the certificate, and keep a
failed tunnel's error across Type and Size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The strip, quiet encrypted rows, warning rows for refused handshakes, the
encrypted card with named actions, trust at the first Decrypt, the toast
with Undo and Reconnect, the pill's Decrypt everything switch, Settings'
Decryption section, the Encrypted sidebar row, and two-step setup. Both
body tabs read Body with a type badge; Info leads the request half with
the timeline folded in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings now opens through the shared create_child_window, as Yaak's
does, so it stays in front of the main window, takes focus back when the
main window is clicked, and closes with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every numeric width is kept in pixels at the default interface size, so
the least width matches what renders at any size and a resize follows
the pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Size, Request Size, Time and Latency are never narrower than their
widest value (999.9 KB, 999m 59s) at any interface size, and their
default widths grow with it. Stored widths under the new least width
are raised when read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every settings tab in Yaak and Yaak Proxy now renders its heading, description,
optional banner and content through SettingsPage, which puts the same 1.5rem gap
between each. The banner slot hides itself when nothing inside it has content,
so Yaak's General tab no longer gets an accidental gap from the empty
commercial-use banner, and the proxy's General tab no longer sits tight under
its description.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings opens in a window labelled `settings`, created through the shared
window code, as Yaak's does. The page renders the settings alone or the app
by its window label. Opening it again focuses it and moves it to the tab
asked for; Escape closes it, and closing the main window closes it too.
Changes made there reach the main window at once: theme and sizes by an
event carrying the values, and engine settings by an event after each RPC
mutation that makes other windows read the proxy state and settings
queries again. The browser harness, with no second window, keeps the
dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rows for apps, folders, sites, hosts and paths get Filter by This Value,
Exclude This Value and Copy Value, as the list's cells have, covering
every selected row. Opening a row's menu no longer applies the row, so
the menu adds to the filter as it is. System's eye becomes Show in All
Traffic in its menu, and Domains counts its hosts as a plain number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The trash button and its hotkey open a confirm dialog instead of a
dropdown. Its Don't ask again checkbox saves a preference that Settings
turns back on under Traffic, as Confirm before clearing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shared Tree reset its selection to the last focused row after every
render, so several selected rows collapsed to one whenever the tree rendered
again, as new traffic changing the counts makes it. It now leaves the
selection alone while that row is still in view and selected.
The proxy's sidebar sync also makes All traffic exclusive, groups a saved
search's own OR in parentheses beside other rows, applies System's heading
query, and on Back or Forward selects the rows whose queries make up the
restored filter, compared by shape so AND and OR stay apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The request half's tab content ran to the card's bottom edge while the
response half's stopped above it, so the Pretty/Raw bar sat 7px from
the bottom on one side and 19px on the other. The request half is now
padded below as the response is. The bar's inset is one constant that
viewers can no longer override, and the form view draws the switch in
one bar with its bulk-view toggle instead of shifting the bar past it,
so every viewer's bar sits 11px from the pane's right and 19px from its
bottom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shared Table gains a density prop; the CSV viewer uses compact,
bringing its rows from about 38px to about 25px with the header to
match. Every other table keeps its spacing.
The proxy no longer reads empty tabs in the subtlest colour: every
inactive tab label is one colour and the count badge alone says a tab
has content. dimEmptyTabs leaves both shared panes and the empty option
leaves Tabs, since nothing else used them. The harness gains a TSV
fixture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every action in an ActionsBar is now held to the height and radius of an
sm icon button and centred on the row; the Pretty/Raw switch is sized to
match instead of sitting shorter than the filter toggle. A CSV part in
the multipart viewer loses leftover debug classes that drew it as a
small primary-coloured block, and takes the pb-2 the other part viewers
use. The harness's multipart fixture gains a CSV part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Form/Raw switch sat over the URL-encoded form's own bulk-view toggle
in the same corner; it now sits beside it. A request body that is both
cut short and undecodable no longer repeats the tab's cut note.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The actions row moves out of the code editor into ActionsBar, a plain
component a wrapper places over its content. FormatAction reformats an
editor through its ref, and BodyViewModeSwitch names its first state for
the body's format (Pretty, Table, Parts, Preview, Form) next to Raw.
Yaak Proxy's request and response body tabs now share one viewer
choice, with the switch in each tab's bar beside the text viewer's
filter. The choice is remembered for both panes; bodies over the large
size open raw. "Response (Raw)" leaves the proxy's tab menu, while
Yaak's response pane keeps it until the remaining sites move.
SegmentedControl moves from the client into packages/ui.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Filters can hold captured values, so neither the reload's places nor the
launch's last filter go into web view storage: the engine holds the places in
memory while the app runs, and proxy.db's last_filter row keeps the last
filter. A read of a selected flow that answers after the window shows a newer
copy no longer replaces it. The pane and stream harnesses select through
goToPlace, so switching a tab no longer empties their card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>