fix: issue #202

Merge pull request #191 from ryan4yin/i3-kickstarter-nixos-25.05
feat: upgrade to nixos-25.05
2026-05-28 18:39:31 +02:00 · 2025-07-12 15:55:13 +08:00 · 2025-05-29 12:25:29 +08:00 · 2025-05-29 12:23:29 +08:00 · 2025-05-29 12:14:13 +08:00 · 2025-05-29 12:04:56 +08:00
24 changed files with 1283 additions and 468 deletions
@@ -0,0 +1,6 @@
+result
+result/
+.direnv/
+.DS_Store
+.pre-commit-config.yaml
+logs/
@@ -3,16 +3,6 @@
 This repository is home to the nix code that builds my systems.


-## TODO
-
- vscode extensions - [nix-vscode-extensions](https://github.com/nix-community/nix-vscode-extensions)
- secret management - [sops-nix](https://github.com/Mic92/sops-nix)
- switch from i3wm to hyprland
-  - i3wm: old and stable, only support X11
-  - sway: compatible with i3wm, support Wayland. do not support Nvidia GPU officially.
-  - [hyprland](https://wiki.hyprland.org/Nix/Hyprland-on-NixOS/): project starts from 2022, support Wayland, envolving fast, good looking, support Nvidia GPU.
-
-
 ## Why Nix?

 Nix allows for easy to manage, collaborative, reproducible deployments. This means that once something is setup and configured once, it works forever. If someone else shares their configuration, anyone can make use of it.
@@ -23,6 +13,6 @@ Nix allows for easy to manage, collaborative, reproducible deployments. This mea
 After installed NixOS with `nix-command` & `flake` enabled, you can deploy this flake with the following command:

 ```bash
-sudo nixos-rebuild switch .#nixos-test
+sudo nixos-rebuild switch --flake .#nixos-test
 ```

@@ -1,117 +1,64 @@
 {
  "nodes": {
-    "flake-compat": {
+    "catppuccin-bat": {
      "flake": false,
      "locked": {
-        "lastModified": 1673956053,
-        "narHash": "sha256-4gtG9iQuiKITOjNQQeQIpoIB6b16fm+504Ch3sNKLd8=",
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "rev": "35bb57c0c8d8b62bbfd284272c928ceb64ddbde9",
+        "lastModified": 1734996624,
+        "narHash": "sha256-6fWoCH90IGumAMc4buLRWL0N61op+AuMNN9CAR9/OdI=",
+        "owner": "catppuccin",
+        "repo": "bat",
+        "rev": "699f60fc8ec434574ca7451b444b880430319941",
        "type": "github"
      },
      "original": {
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "type": "github"
-      }
-    },
-    "flake-utils": {
-      "locked": {
-        "lastModified": 1667395993,
-        "narHash": "sha256-nuEHfE/LcWyuSWnS8t12N1wc105Qtau+/OdUAjtQ0rA=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "5aed5285a952e0b949eb3ba02c12fa4fcfef535f",
-        "type": "github"
-      },
-      "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
+        "owner": "catppuccin",
+        "repo": "bat",
        "type": "github"
      }
    },
    "home-manager": {
      "inputs": {
-        "nixpkgs": [
-          "nixpkgs"
-        ]
+        "nixpkgs": ["nixpkgs"]
      },
      "locked": {
-        "lastModified": 1682176386,
-        "narHash": "sha256-xwYjQ8PjfdHlggi8Dq0PXWby/1oXegSUuNuBvoTcnpA=",
+        "lastModified": 1748487945,
+        "narHash": "sha256-e9zc/rHdoH9i+sFFhhQiKoF6IuD+T2rB/nUyPaO7CCg=",
        "owner": "nix-community",
        "repo": "home-manager",
-        "rev": "6169690ae38175295605d521bd778d999fbd85cd",
+        "rev": "0d13ea58d565d3c1c1468ddae1f623316dc395d9",
        "type": "github"
      },
      "original": {
        "owner": "nix-community",
+        "ref": "release-25.05",
        "repo": "home-manager",
        "type": "github"
      }
    },
-    "nix-vscode-extensions": {
-      "inputs": {
-        "flake-compat": "flake-compat",
-        "flake-utils": "flake-utils",
-        "nixpkgs": "nixpkgs"
-      },
-      "locked": {
-        "lastModified": 1683076311,
-        "narHash": "sha256-xGvR07+fR5g/89oVEQieKG/ZveGHZZyhxXcRouW0WCk=",
-        "owner": "nix-community",
-        "repo": "nix-vscode-extensions",
-        "rev": "70d48e0c7eafdbcdaa9dac6c17f46a88872f7285",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-community",
-        "repo": "nix-vscode-extensions",
-        "type": "github"
-      }
-    },
    "nixpkgs": {
      "locked": {
-        "lastModified": 1675763311,
-        "narHash": "sha256-bz0Q2H3mxsF1CUfk26Sl9Uzi8/HFjGFD/moZHz1HebU=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "fab09085df1b60d6a0870c8a89ce26d5a4a708c2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixos-unstable",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs_2": {
-      "locked": {
-        "lastModified": 1681920287,
-        "narHash": "sha256-+/d6XQQfhhXVfqfLROJoqj3TuG38CAeoT6jO1g9r1k0=",
+        "lastModified": 1748302896,
+        "narHash": "sha256-ixMT0a8mM091vSswlTORZj93WQAJsRNmEvqLL+qwTFM=",
        "owner": "nixos",
        "repo": "nixpkgs",
-        "rev": "645bc49f34fa8eff95479f0345ff57e55b53437e",
+        "rev": "7848cd8c982f7740edf76ddb3b43d234cb80fc4d",
        "type": "github"
      },
      "original": {
        "owner": "nixos",
-        "ref": "nixos-unstable",
+        "ref": "nixos-25.05",
        "repo": "nixpkgs",
        "type": "github"
      }
    },
    "root": {
      "inputs": {
+        "catppuccin-bat": "catppuccin-bat",
        "home-manager": "home-manager",
-        "nix-vscode-extensions": "nix-vscode-extensions",
-        "nixpkgs": "nixpkgs_2"
+        "nixpkgs": "nixpkgs"
      }
    }
  },
  "root": "root",
  "version": 7
 }
-
@@ -1,21 +1,17 @@
 {
  description = "NixOS configuration of Ryan Yin";

-  # flake 为了确保够纯，它不依赖系统自身的 /etc/nix/nix.conf，而是在 flake.nix 中通过 nixConfig 设置
-  # 但是为了确保安全性，flake 默认仅允许直接设置少数 nixConfig 参数，其他参数都需要在执行 nix 命令时指定 `--accept-flake-config`，否则会被忽略
-  # <https://nixos.org/manual/nix/stable/command-ref/conf-file.html>
-  # 如果有些包国内镜像下载不到，它仍然会走国外，这时候就得靠旁路由来解决了。
-  # 临时修改默认网关为旁路由:  sudo ip route add default via 192.168.5.201
-  #                        sudo ip route del default via 192.168.5.201
-  nixConfig = {
-    experimental-features = [ "nix-command" "flakes" ];
-    substituters = [
-      # replace official cache with a mirror located in China
-      "https://mirrors.bfsu.edu.cn/nix-channels/store"
-      "https://cache.nixos.org/"
-    ];
+  ##################################################################################################################
+  #
+  # Want to know Nix in details? Looking for a beginner-friendly tutorial?
+  # Check out https://github.com/ryan4yin/nixos-and-flakes-book !
+  #
+  ##################################################################################################################

-    # nix community's cache server
+  # the nixConfig here only affects the flake itself, not the system configuration!
+  nixConfig = {
+    # substituers will be appended to the default substituters when fetching packages
+    # nix com    extra-substituters = [munity's cache server
    extra-substituters = [
      "https://nix-community.cachix.org"
    ];
@@ -24,92 +20,69 @@
    ];
  };

-  # 这是 flake.nix 的标准格式，inputs 是 flake 的依赖，outputs 是 flake 的输出
-  # inputs 中的每一项都被拉取、构建后，被作为参数传递给 outputs 函数
  inputs = {
-    # flake inputs 有很多种引用方式，应用最广泛的是 github 的引用方式
-
-    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";      # 使用 nixos-unstable 分支
-    home-manager.url = "github:nix-community/home-manager";
-    #　follows 是　inputs 中的继承语法
-    # 这里使　home-manager 的　nixpkgs 这个 inputs 与当前　flake 的　inputs.nixpkgs 保持一致，避免依赖的　nixpkgs 版本不一致导致问题
+    nixpkgs.url = "github:nixos/nixpkgs/nixos-25.05";
+    home-manager.url = "github:nix-community/home-manager/release-25.05";
    home-manager.inputs.nixpkgs.follows = "nixpkgs";

-    # vscode 插件库
-    nix-vscode-extensions.url = "github:nix-community/nix-vscode-extensions";
+    catppuccin-bat = {
+      url = "github:catppuccin/bat";
+      flake = false;
+    };
  };

-  # outputs 的参数都是 inputs 中定义的依赖项，可以通过它们的名称来引用。
-  # 不过 self 是个例外，这个特殊参数指向 outputs 自身（自引用），以及 flake 根目录
-  # 这里的 @ 语法将函数的参数 attribute set 取了个别名，方便在内部使用
-  outputs = inputs@{
-      self,
-      nixpkgs,
-      home-manager,
-      nix-vscode-extensions,
-      ...
+  outputs = inputs @ {
+    self,
+    nixpkgs,
+    home-manager,
+    ...
  }: {
-    # 名为 nixosConfigurations 的 outputs 会在执行 `nixos-rebuild switch --flake .` 时被使用
-    # 默认情况下会使用与主机 hostname 同名的 nixosConfigurations，但是也可以通过 `--flake .#<name>` 来指定
    nixosConfigurations = {
-      # hostname 为 nixos-test 的主机会使用这个配置
-      # 这里使用了 nixpkgs.lib.nixosSystem 函数来构建配置，后面的 attributes set 是它的参数
-      # 在 nixos 上使用此命令部署配置：`nixos-rebuild switch --flake .#nixos-test`
-      nixos-test = nixpkgs.lib.nixosSystem {
-        system = "x86_64-linux";
+      nixos-test = let
+        username = "ryan";
+        specialArgs = {inherit username;};
+      in
+        nixpkgs.lib.nixosSystem {
+          inherit specialArgs;
+          system = "x86_64-linux";

-        # modules 中每个参数，都是一个 NixOS Module <https://nixos.org/manual/nixos/stable/index.html#sec-modularity>
-        # NixOS Module 可以是一个 attribute set，也可以是一个返回 attribute set 的函数
-        # 如果是函数，那么它的参数就是当前的 NixOS Module 的参数.
-        # 根据 Nix Wiki 对 NixOS modules 的描述，NixOS modules 函数的参数可以有这四个（详见本仓库中的 modules 文件）：
-        #
-        #  config: The configuration of the entire system
-        #  options: All option declarations refined with all definition and declaration references.
-        #  pkgs: The attribute set extracted from the Nix package collection and enhanced with the nixpkgs.config option.
-        #  modulesPath: The location of the module directory of NixOS.
-        #
-        # nix flake 的 modules 系统可将配置模块化，提升配置的可维护性
-        # 默认只能传上面这四个参数，如果需要传其他参数，必须使用 specialArgs
-        modules = [
-          ./hosts/nixos-test
+          modules = [
+            ./hosts/nixos-test
+            ./users/${username}/nixos.nix

-          # home-manager 作为 nixos 的一个 module
-          # 这样在 nixos-rebuild switch 时，home-manager 也会被自动部署，不需要额外执行 home-manager switch 命令
-          home-manager.nixosModules.home-manager
-          {
-            home-manager.useGlobalPkgs = true;
-            home-manager.useUserPackages = true;
+            home-manager.nixosModules.home-manager
+            {
+              home-manager.useGlobalPkgs = true;
+              home-manager.useUserPackages = true;

-            # 使用 home-manager.extraSpecialArgs 自定义传递给 ./home 的参数
-            home-manager.extraSpecialArgs = inputs;
-            home-manager.users.ryan = import ./home;
-          }
-        ];
-      };
+              home-manager.extraSpecialArgs = inputs // specialArgs;
+              home-manager.users.${username} = import ./users/${username}/home.nix;
+            }
+          ];
+        };

-      msi-rtx4090 = nixpkgs.lib.nixosSystem {
-        system = "x86_64-linux";
+      msi-rtx4090 = let
+        username = "suzi"; # another username for this machine
+        specialArgs = {inherit username;};
+      in
+        nixpkgs.lib.nixosSystem {
+          inherit specialArgs;
+          system = "x86_64-linux";

-        modules = [
-          ./hosts/msi-rtx4090
+          modules = [
+            ./hosts/msi-rtx4090
+            ./users/${username}/nixos.nix

-          # home-manager 作为 nixos 的一个 module
-          # 这样在 nixos-rebuild switch 时，home-manager 也会被自动部署，不需要额外执行 home-manager switch 命令
-          home-manager.nixosModules.home-manager
-          {
-            home-manager.useGlobalPkgs = true;
-            home-manager.useUserPackages = true;
+            home-manager.nixosModules.home-manager
+            {
+              home-manager.useGlobalPkgs = true;
+              home-manager.useUserPackages = true;

-            # 使用 home-manager.extraSpecialArgs 自定义传递给 ./home 的参数
-            home-manager.extraSpecialArgs = inputs;
-            home-manager.users.ryan = import ./home;
-          }
-        ];
-      };
-
-
-      # 如果你在 x86_64-linux 平台上执行 nix build，那么默认会使用这个配置，或者也能通过 `.#<name>` 参数来指定非 default 的配置
-      # packages.x86_64-linux.default =
+              home-manager.extraSpecialArgs = inputs // specialArgs;
+              home-manager.users.${username} = import ./users/${username}/home.nix;
+            }
+          ];
+        };
    };
  };
 }
@@ -1,20 +1,9 @@
-{ config, pkgs, ... }:
-
-{
-
-  imports = [
-    ./fcitx5
-    ./i3
-    ./programs
-    ./rofi
-    ./shell
-  ];
-
+{username, ...}: {
  # Home Manager needs a bit of information about you and the
  # paths it should manage.
  home = {
-    username = "ryan";
-    homeDirectory = "/home/ryan";
+    inherit username;
+    homeDirectory = "/home/${username}";

    # This value determines the Home Manager release that your
    # configuration is compatible with. This helps avoid breakage
@@ -24,7 +13,7 @@
    # You can update Home Manager without changing this value. See
    # the Home Manager release notes for a list of state version
    # changes in each release.
-    stateVersion = "22.11";
+    stateVersion = "25.05";
  };

  # Let Home Manager install and manage itself.
@@ -1,6 +1,7 @@
 {
  pkgs,
  config,
+  username,
  ...
 }: {
  programs = {
@@ -14,7 +15,7 @@

    firefox = {
      enable = true;
-      profiles.ryan = {};
+      profiles.${username} = {};
    };
  };
-}
+}
@@ -1,4 +1,9 @@
-{pkgs, ...}: {
+{
+  lib,
+  pkgs,
+  catppuccin-bat,
+  ...
+}: {
  home.packages = with pkgs; [
    # archives
    zip
@@ -7,7 +12,7 @@

    # utils
    ripgrep
-    yq-go    # https://github.com/mikefarah/yq
+    yq-go # https://github.com/mikefarah/yq
    htop

    # misc
@@ -26,14 +31,13 @@
    docker-compose
    kubectl

-
    nodejs
    nodePackages.npm
    nodePackages.pnpm
    yarn

    # db related
-    dbeaver
+    dbeaver-bin
    mycli
    pgcli
  ];
@@ -50,19 +54,20 @@
      enable = true;
      config = {
        pager = "less -FR";
-        theme = "Catppuccin-mocha";
+        theme = "catppuccin-mocha";
      };
      themes = {
-        Catppuccin-mocha = builtins.readFile (pkgs.fetchurl {
-          url = "https://raw.githubusercontent.com/catppuccin/bat/main/Catppuccin-mocha.tmTheme";
-          hash = "sha256-qMQNJGZImmjrqzy7IiEkY5IhvPAMZpq0W6skLLsng/w=";
-        });
+        # https://raw.githubusercontent.com/catppuccin/bat/main/Catppuccin-mocha.tmTheme
+        catppuccin-mocha = {
+          src = catppuccin-bat;
+          file = "Catppuccin-mocha.tmTheme";
+        };
      };
    };

-    btop.enable = true;  # replacement of htop/nmon
-    exa.enable = true;   # A modern replacement for ‘ls’
-    jq.enable = true;    # A lightweight and flexible command-line JSON processor
+    btop.enable = true; # replacement of htop/nmon
+    eza.enable = true; # A modern replacement for ‘ls’
+    jq.enable = true; # A lightweight and flexible command-line JSON processor
    ssh.enable = true;
    aria2.enable = true;

@@ -83,4 +88,4 @@
    # auto mount usb drives
    udiskie.enable = true;
  };
-}
+}
@@ -1,14 +1,9 @@
 {
-  config,
-  pkgs,
-  ...
-}: {
  imports = [
    ./browsers.nix
    ./common.nix
    ./git.nix
    ./media.nix
-    ./vscode.nix
    ./xdg.nix
  ];
-}
+}
@@ -7,7 +7,6 @@
  programs.git = {
    enable = true;

-    userName = "Ryan Yin";
-    userEmail = "xiaoyin_c@qq.com";
+    # ... Other options ...
  };
-}
+}
@@ -1,126 +0,0 @@
-{ 
-  config,
-  pkgs,
-  home-manager,
-  nix-vscode-extensions,
-  ... 
-}: 
-
-{
-
-  # if use vscode in wayland, uncomment this line
-  # environment.sessionVariables.NIXOS_OZONE_WL = "1";
-  programs.vscode = {
-    enable = true;
-    userSettings = {
-      "editor.renderWhitespace" = "all";
-      "files.autoSave" = "onFocusChange";
-      "editor.rulers" = [ 80 120 ];
-      "telemetry.enableTelemetry" = false;
-      "telemetry.enableCrashReporter" = false;
-      "editor.tabSize" = 2;
-      "files.exclude" = { "**/node_modules/**" = true; };
-      "editor.formatOnSave" = false;
-      "breadcrumbs.enabled" = true;
-      "editor.useTabStops" = false;
-      "editor.fontFamily" = "JetBrainsMono Nerd Font";
-      "editor.fontSize" = 16;
-      "editor.fontLigatures" = true;
-      "editor.lineHeight" = 20;
-      "workbench.fontAliasing" = "antialiased";
-      "files.trimTrailingWhitespace" = true;
-      "editor.minimap.enabled" = false;
-      "workbench.editor.enablePreview" = false;
-      "terminal.integrated.fontFamily" = "JetBrainsMono Nerd Font";
-    };
-
-    package = 
-      let 
-        config.packageOverrides = pkgs: {
-          vscode = pkgs.vscode-with-extensions.override {
-            # pkgs.vscode-extensions 里包含的 vscode 太少了
-            # 必须使用社区的 <https://github.com/nix-community/nix-vscode-extensions> 才能安装更多插件
-            vscodeExtensions = with nix-vscode-extensions.extensions; [
-              aaron-bond.better-comments
-              anweber.vscode-httpyac
-              arrterian.nix-env-selector
-              bierner.markdown-mermaid
-              christian-kohler.path-intellisense
-              cschlosser.doxdocgen
-              DanishSarwar.reverse-search
-              eamodio.gitlens
-              esbenp.prettier-vscode
-              espressif.esp-idf-extension
-              fabiospampinato.vscode-diff
-              GitHub.copilot
-              golang.go
-              hashicorp.terraform
-              janisdd.vscode-edit-csv
-              jebbs.plantuml
-              jeff-hykin.better-cpp-syntax
-              jnoortheen.nix-ide
-              JuanBlanco.solidity
-              k--kato.intellij-idea-keybindings
-              llvm-vs-code-extensions.vscode-clangd
-              mcu-debug.debug-tracker-vscode
-              mcu-debug.memory-view
-              mcu-debug.rtos-views
-              mikestead.dotenv
-              mkhl.direnv
-              ms-azuretools.vscode-docker
-              ms-dotnettools.vscode-dotnet-runtime
-              ms-kubernetes-tools.vscode-kubernetes-tools
-              ms-python.isort
-              ms-python.python
-              ms-python.vscode-pylance
-              ms-toolsai.jupyter
-              ms-toolsai.jupyter-keymap
-              ms-toolsai.jupyter-renderers
-              ms-toolsai.vscode-jupyter-cell-tags
-              ms-toolsai.vscode-jupyter-slideshow
-              ms-vscode-remote.remote-containers
-              ms-vscode-remote.remote-ssh
-              ms-vscode-remote.remote-ssh-edit
-              ms-vscode-remote.vscode-remote-extensionpack
-              ms-vscode.cmake-tools
-              ms-vscode.cpptools
-              ms-vscode.cpptools-extension-pack
-              ms-vscode.cpptools-themes
-              ms-vscode.remote-explorer
-              ms-vscode.remote-server
-              pinage404.nix-extension-pack
-              platformio.platformio-ide
-              pomdtr.excalidraw-editor
-              redhat.java
-              redhat.vscode-commons
-              redhat.vscode-xml
-              redhat.vscode-yaml
-              rust-lang.rust-analyzer
-              shd101wyy.markdown-preview-enhanced
-              sumneko.lua
-              tamasfe.even-better-toml
-              timonwong.shellcheck
-              tintinweb.graphviz-interactive-preview
-              tintinweb.solidity-visual-auditor
-              tintinweb.vscode-inline-bookmarks
-              tintinweb.vscode-solidity-flattener
-              tintinweb.vscode-solidity-language
-              twxs.cmake
-              vadimcn.vscode-lldb
-              VisualStudioExptTeam.intellicode-api-usage-examples
-              VisualStudioExptTeam.vscodeintellicode
-              vscjava.vscode-java-debug
-              vscjava.vscode-java-pack
-              vscjava.vscode-java-test
-              vscjava.vscode-maven
-              vscode-icons-team.vscode-icons
-              WakaTime.vscode-wakatime
-              yzhang.markdown-all-in-one
-              zxh404.vscode-proto3
-            ];
-          };
-        };
-      in
-        pkgs.vscode;
-  };
-}
@@ -18,7 +18,7 @@
    "x-scheme-handler/unknown" = browser;

    "audio/*" = ["mpv.desktop"];
-    "video/*" = ["mpv.dekstop"];
+    "video/*" = ["mpv.desktop"];
    "image/*" = ["imv.desktop"];
    "application/json" = browser;
    "application/pdf" = ["org.pwmt.zathura.desktop.desktop"];
@@ -44,4 +44,4 @@ in {
      };
    };
  };
-}
+}
@@ -16,7 +16,6 @@ in {
    LESSHISTFILE = cache + "/less/history";
    LESSKEY = c + "/less/lesskey";
    WINEPREFIX = d + "/wine";
-    XAUTHORITY = "$XDG_RUNTIME_DIR/Xauthority";

    # set default applications
    EDITOR = "vim";
@@ -32,4 +31,4 @@ in {
  home.shellAliases = {
    k = "kubectl";
  };
-}
+}
@@ -0,0 +1,973 @@
+# Based on the default config generated by:
+#    ```
+#    config nu --doc
+#    ```
+#
+# Nushell Config File Documentation
+#
+# Warning: This file is intended for documentation purposes only and
+# is not intended to be used as an actual configuration file as-is.
+#
+# version = "0.105.1"
+#
+# A `config.nu` file is used to override default Nushell settings,
+# define (or import) custom commands, or run any other startup tasks.
+# See https://www.nushell.sh/book/configuration.html
+#
+# Nushell sets "sensible defaults" for most configuration settings, so
+# the user's `config.nu` only needs to override these defaults if
+# desired.
+#
+# This file serves as simple "in-shell" documentation for these
+# settings, or you can view a more complete discussion online at:
+# https://nushell.sh/book/configuration
+#
+# You can pretty-print and page this file using:
+# config nu --doc | nu-highlight | less -R
+
+# $env.config
+# -----------
+# The $env.config environment variable is a record containing most Nushell
+# configuration settings. Keep in mind that, as a record, setting it to a
+# new record will remove any keys which aren't in the new record. Nushell
+# will then automatically merge in the internal defaults for missing keys.
+#
+# The same holds true for keys in the $env.config which are also records
+# or lists.
+#
+# For this reason, settings are typically changed by updating the value of
+# a particular key. Merging a new config record is also possible. See the
+# Configuration chapter of the book for more information.
+
+# ------------------------
+# History-related settings
+# ------------------------
+# $env.config.history.*
+
+# file_format (string):  Either "sqlite" or "plaintext". While text-backed history
+# is currently the default for historical reasons, "sqlite" is stable and
+# provides more advanced history features.
+$env.config.history.file_format = "sqlite"
+
+# max_size (int): The maximum number of entries allowed in the history.
+# After exceeding this value, the oldest history items will be removed
+# as new commands are added.
+$env.config.history.max_size = 5_000_000
+
+# sync_on_enter (bool): Whether the plaintext history file is updated
+# each time a command is entered. If set to `false`, the plaintext history
+# is only updated/written when the shell exits. This setting has no effect
+# for SQLite-backed history.
+$env.config.history.sync_on_enter = true
+
+# isolation (bool):
+# `true`: New history from other currently-open Nushell sessions is not
+# seen when scrolling through the history using PrevHistory (typically
+# the Up key) or NextHistory (Down key)
+# `false`: All commands entered in other Nushell sessions will be mixed with
+# those from the current shell.
+# Note: Older history items (from before the current shell was started) are
+# always shown.
+# This setting only applies to SQLite-backed history
+$env.config.history.isolation = true
+
+# ----------------------
+# Miscellaneous Settings
+# ----------------------
+
+# show_banner (bool): Enable or disable the welcome banner at startup
+$env.config.show_banner = true
+
+# rm.always_trash (bool):
+# true: rm behaves as if the --trash/-t option is specified
+# false: rm behaves as if the --permanent/-p option is specified (default)
+# Explicitly calling `rm` with `--trash` or `--permanent` always override this setting
+# Note that this feature is dependent on the host OS trashcan support.
+$env.config.rm.always_trash = false
+
+# recursion_limit (int): how many times a command can call itself recursively
+# before an error will be generated.
+$env.config.recursion_limit = 50
+
+# ---------------------------
+# Commandline Editor Settings
+# ---------------------------
+
+# edit_mode (string) "vi" or "emacs" sets the editing behavior of Reedline
+$env.config.edit_mode = "emacs"
+
+# Command that will be used to edit the current line buffer with Ctrl+O.
+# If unset, uses $env.VISUAL and then $env.EDITOR
+#
+# Tip: Set to "editor" to use the default editor on Unix platforms using
+#      the Alternatives system or equivalent
+$env.config.buffer_editor = "editor"
+# To set arguments for the editor, a list can be used:
+$env.config.buffer_editor = ["emacsclient", "-s", "light", "-t"]
+
+# cursor_shape_* (string)
+# -----------------------
+# The following variables accept a string from the following selections:
+# "block", "underscore", "line", "blink_block", "blink_underscore", "blink_line", or "inherit"
+# "inherit" skips setting cursor shape and uses the current terminal setting.
+$env.config.cursor_shape.emacs = "inherit"         # Cursor shape in emacs mode
+$env.config.cursor_shape.vi_insert = "block"       # Cursor shape in vi-insert mode
+$env.config.cursor_shape.vi_normal = "underscore"  # Cursor shape in normal vi mode
+
+# --------------------
+# Completions Behavior
+# --------------------
+# $env.config.completions.*
+# Apply to the Nushell completion system
+
+# algorithm (string): "prefix", "substring" or "fuzzy"
+$env.config.completions.algorithm = "prefix"
+
+# sort (string): One of "smart" or "alphabetical"
+# In "smart" mode sort order is based on the "algorithm" setting.
+# When using the "prefix" algorithm, results are alphabetically sorted.
+# When using the "substring" algorithm, results are alphabetically sorted.
+# When using the "fuzzy" algorithm, results are sorted based on their fuzzy score.
+$env.config.completions.sort = "smart"
+
+# case_sensitive (bool): true/false to enable/disable case-sensitive completions
+$env.config.completions.case_sensitive = false
+
+# quick (bool):
+# true: auto-select the completion when only one remains
+# false: prevents auto-select of the final result
+$env.config.completions.quick = true
+
+# partial (bool):
+# true: Partially complete up to the best possible match
+# false: Do not partially complete
+# Partial Example: If a directory contains only files named "forage", "food", and "forest",
+#                  then typing "ls " and pressing <Tab> will partially complete the first two
+#                  letters, "f" and "o". If the directory also includes a file named "faster",
+#                  then only "f" would be partially completed.
+$env.config.completions.partial = true
+
+# use_ls_colors (bool): When true, apply LS_COLORS to file/path/directory matches
+$env.config.completions.use_ls_colors = true
+
+# --------------------
+# External Completions
+# --------------------
+# completions.external.*: Settings related to completing external commands
+# and additional completers
+
+# external.enable (bool)
+# true: search for external commands on the Path
+# false: disabling might be desired for performance if your path includes
+#        directories on a slower filesystem
+$env.config.completions.external.enable = true
+
+# max_results (int): Limit the number of external commands retrieved from
+# path to this value. Has no effect if `...external.enable` (above) is set to `false`
+$env.config.completions.external.max_results = 50
+
+# completer (closure with a |spans| parameter): A command to call for *argument* completions
+# to commands (internal or external).
+#
+# The |spans| parameter is a list of strings representing the tokens (spans)
+# on the current commandline. It is always a list of at least two strings - The
+# command being completed plus the first argument of that command ("" if no argument has
+# been partially typed yet), and additional strings for additional arguments beyond
+# the first.
+#
+# This setting is usually set to a closure which will call a third-party completion system, such
+# as Carapace.
+#
+# Note: The following is an over-simplified completer command that will call Carapace if it
+# is installed. Please use the official Carapace completer, which can be generated automatically
+# by Carapace itself. See the Carapace documentation for the proper syntax.
+$env.config.completions.external.completer = {|spans|
+  carapace $spans.0 nushell ...$spans | from json
+}
+
+# --------------------
+# Terminal Integration
+# --------------------
+# Nushell can output a number of escape codes to enable advanced features in Terminal Emulators
+# that support them. Settings in this section enable or disable these features in Nushell.
+# Features aren't supported by your Terminal can be disabled. Features can also be disabled,
+#  of course, if there is a conflict between the Nushell and Terminal's implementation.
+
+# use_kitty_protocol (bool):
+# A keyboard enhancement protocol supported by the Kitty Terminal. Additional keybindings are
+# available when using this protocol in a supported terminal. For example, without this protocol,
+# Ctrl+I is interpreted as the Tab Key. With this protocol, Ctrl+I and Tab can be mapped separately.
+$env.config.use_kitty_protocol = false
+
+# osc2 (bool):
+# When true, the current directory and running command are shown in the terminal tab/window title.
+# Also abbreviates the directory name by prepending ~ to the home directory and its subdirectories.
+$env.config.shell_integration.osc2 = true
+
+# osc7 (bool):
+# Nushell will report the current directory to the terminal using OSC 7. This is useful when
+# spawning new tabs in the same directory.
+# This is disabled by default on Windows in favor of the `osc9_9` option.
+$env.config.shell_integration.osc7 = true
+
+# osc9_9 (bool):
+# Enables/Disables OSC 9;9 support, originally a ConEmu terminal feature. This is an
+# alternative to OSC 7 which also communicates the current path to the terminal.
+# This is enabled by default on Windows as it is used by the Windows Terminal.
+$env.config.shell_integration.osc9_9 = false
+
+# osc8 (bool):
+# When true, the `ls` command will generate clickable links that can be launched in another
+# application by the terminal.
+# Note: This setting replaces the now deprecated `ls.clickable_links`
+$env.config.shell_integration.osc8 = true
+
+# Deprecated
+# $env.config.ls.clickable_links = true
+
+# osc133 (bool):
+# true/false to enable/disable OSC 133 support, a set of several escape sequences which
+# report the (1) starting location of the prompt, (2) ending location of the prompt,
+# (3) starting location of the command output, and (4) the exit code of the command.
+
+# originating with Final Term. These sequences report information regarding the prompt
+# location as well as command status to the terminal. This enables advanced features in
+# some terminals, including the ability to provide separate background colors for the
+# command vs. the output, collapsible output, or keybindings to scroll between prompts.
+$env.config.shell_integration.osc133 = true
+
+# osc633 (bool):
+# true/false to enable/disable OSC 633, an extension to OSC 133 for Visual Studio Code
+$env.config.shell_integration.osc633 = true
+
+# reset_application_mode (bool):
+# true/false to enable/disable sending ESC[?1l to the terminal
+# This sequence is commonly used to keep cursor key modes in sync between the local
+# terminal and a remote SSH host.
+$env.config.shell_integration.reset_application_mode = true
+
+# bracketed_paste (bool):
+# true/false to enable/disable the bracketed-paste feature, which allows multiple-lines
+# to be pasted into Nushell at once without immediate execution. When disabled,
+# each pasted line is executed as it is received.
+# Note that bracketed paste is not currently supported on the Windows version of
+# Nushell.
+$env.config.bracketed_paste = true
+
+# use_ansi_coloring ("auto" or bool):
+# The default value `"auto"` dynamically determines if ANSI coloring is used.
+# It evaluates the following environment variables in decreasingly priority:
+# `FORCE_COLOR`, `NO_COLOR`, and `CLICOLOR`.
+# - If `FORCE_COLOR` is set, coloring is always enabled.
+# - If `NO_COLOR` is set, coloring is disabled.
+# - If `CLICOLOR` is set, its value (0 or 1) decides whether coloring is used.
+# If none of these are set, it checks whether the standard output is a terminal
+# and enables coloring if it is.
+# A value of `true` or `false` overrides this behavior, explicitly enabling or
+# disabling ANSI coloring in Nushell's internal commands.
+# When disabled, built-in commands will only use the default foreground color.
+# Note: This setting does not affect the `ansi` command.
+$env.config.use_ansi_coloring = "auto"
+
+# ----------------------
+# Error Display Settings
+# ----------------------
+
+# error_style (string): One of "fancy" or "plain"
+# Plain: Display plain-text errors for screen-readers
+# Fancy: Display errors using line-drawing characters to point to the span in which the
+#        problem occurred.
+$env.config.error_style = "fancy"
+
+# display_errors.exit_code (bool):
+# true: Display a Nushell error when an external command returns a non-zero exit code
+# false: Display only the error information printed by the external command itself
+# Note: Core dump errors are always printed; SIGPIPE never triggers an error
+$env.config.display_errors.exit_code = false
+
+# display_errors.termination_signal (bool):
+# true/false to enable/disable displaying a Nushell error when a child process is
+# terminated via any signal
+$env.config.display_errors.termination_signal = true
+
+# -------------
+# Table Display
+# -------------
+# footer_mode (string or int):
+# Specifies when to display table footers with column names. Allowed values:
+# "always"
+# "never"
+# "auto": When the length of the table would scroll the header past the first line of the terminal
+# (int): When the number of table rows meets or exceeds this value
+# Note: Does not take into account rows with multiple lines themselves
+$env.config.footer_mode = 25
+
+# table.*
+# mode (string):
+# Specifies the visual display style of a table
+# One of: "default", "basic", "compact", "compact_double", "heavy", "light", "none", "reinforced",
+# "rounded", "thin", "with_love", "psql", "markdown", "dots", "restructured", "ascii_rounded",
+# "basic_compact" or "single"
+# Can be overridden by passing a table to `| table --theme/-t`
+$env.config.table.mode = "default"
+
+# index_mode (string) - One of:
+# "never": never show the index column in a table or list
+# "always": always show the index column in tables and lists
+# "auto": show the column only when there is an explicit "index" column in the table
+# Can be overridden by passing a table to `| table --index/-i`
+$env.config.table.index_mode = "always"
+
+# show_empty (bool):
+# true: show "empty list" or "empty table" when no values exist
+# false: display no output when no values exist
+$env.config.table.show_empty = true
+
+# padding.left/right (int): The number of spaces to pad around values in each column
+$env.config.table.padding.left = 1
+$env.config.table.padding.right = 1
+
+# trim.*: The rules that will be used to display content in a table row when it would cause the
+#         table to exceed the terminal width.
+# methodology (string): One of "wrapping" or "truncating"
+# truncating_suffix (string): The text to show at the end of the row to indicate that it has
+#                             been truncated. Only valid when `methodology = "truncating"`.
+# wrapping_try_keep_words (bool): true to keep words together based on whitespace
+#                                 false to allow wrapping in the middle of a word.
+#                                 Only valid when `methodology = wrapping`.
+$env.config.table.trim = {
+  methodology: "wrapping"
+  wrapping_try_keep_words: true
+}
+# or
+$env.config.table.trim = {
+  methodology: "truncating"
+  truncating_suffix: "..."
+}
+
+# header_on_separator (bool):
+# true: Displays the column headers as part of the top (or bottom) border of the table
+# false: Displays the column header in its own row with a separator below.
+$env.config.table.header_on_separator = false
+
+# abbreviated_row_count (int or nothing):
+# If set to an int, all tables will be abbreviated to only show the first <n> and last <n> rows
+# If set to `null`, all table rows will be displayed
+# Can be overridden by passing a table to `| table --abbreviated/-a`
+$env.config.table.abbreviated_row_count = null
+
+# footer_inheritance (bool): Footer behavior in nested tables
+# true: If a nested table is long enough on its own to display a footer (per `footer_mode` above),
+#       then also display the footer for the parent table
+# false: Always apply `footer_mode` rules to the parent table
+$env.config.table.footer_inheritance = false
+
+# missing_value_symbol (string): The symbol shown for missing values
+$env.config.table.missing_value_symbol = "❎"
+
+# ----------------
+# Datetime Display
+# ----------------
+# datetime_format.* (string or nothing):
+# Format strings that will be used for datetime values.
+# When set to `null`, the default behavior is to "humanize" the value (e.g., "now" or "a day ago")
+
+# datetime_format.table (string or nothing):
+# The format string (or `null`) that will be used to display a datetime value when it appears in a
+# structured value such as a table, list, or record.
+$env.config.datetime_format.table = null
+
+# datetime_format.normal (string or nothing):
+# The format string (or `null`) that will be used to display a datetime value when it appears as
+# a raw value.
+$env.config.datetime_format.normal = "%m/%d/%y %I:%M:%S%p"
+
+# ----------------
+# Filesize Display
+# ----------------
+# filesize.unit (string): One of either:
+# - A filesize unit: "B", "kB", "KiB", "MB", "MiB", "GB", "GiB", "TB", "TiB", "PB", "PiB", "EB", or "EiB".
+# - An automatically scaled unit: "metric" or "binary".
+# "metric" will use units with metric (SI) prefixes like kB, MB, or GB.
+# "binary" will use units with binary prefixes like KiB, MiB, or GiB.
+# Otherwise, setting this to one of the filesize units will use that particular unit when displaying all file sizes.
+$env.config.filesize.unit = 'metric'
+
+# filesize.show_unit (bool):
+# Whether to show or hide the file size unit. Useful if `$env.config.filesize.unit` is set to a fixed unit,
+# and you don't want that same unit repeated over and over again in which case you can set this to `false`.
+$env.config.filesize.show_unit = true
+
+# filesize.precision (int or nothing):
+# The number of digits to display after the decimal point for file sizes.
+# When set to `null`, all digits after the decimal point, if any, will be displayed.
+$env.config.filesize.precision = 1
+
+# ---------------------
+# Miscellaneous Display
+# ---------------------
+
+# render_right_prompt_on_last_line(bool):
+# true: When using a multi-line left-prompt, the right-prompt will be displayed on the last line
+# false: The right-prompt is displayed on the first line of the left-prompt
+$env.config.render_right_prompt_on_last_line = false
+
+# float_precision (int):
+# Float values will be rounded to this precision when displaying in structured values such as lists,
+# tables, or records.
+$env.config.float_precision = 2
+
+# ls.use_ls_colors (bool):
+# true: The `ls` command will apply the $env.LS_COLORS standard to filenames
+# false: Filenames in the `ls` table will use the color_config for strings
+$env.config.ls.use_ls_colors = true
+
+# Hooks
+# -----
+# $env.config.hooks is a record containing the five different types of Nushell hooks.
+# See the Hooks documentation at https://www.nushell.sh/book/hooks for details
+#
+# Most hooks can accept a string, a closure, or a list containing strings and/or closures.
+# The display_output record can only accept a string or a closure, but never a list
+#
+# WARNING: A malformed display_output hook can suppress all Nushell output to the terminal.
+#          It can be reset by assigning an empty string as below:
+
+# Before each prompt is displayed
+$env.config.hooks.pre_prompt = []
+# After <enter> is pressed; before the commandline is executed
+$env.config.hooks.pre_execution = []
+# When a specified environment variable changes
+$env.config.hooks.env_change = {
+    # Example: Run if the PWD environment is different since the last REPL input
+    PWD: [{|before, after| null }]
+}
+# Before Nushell output is displayed in the terminal
+$env.config.hooks.display_output = "if (term size).columns >= 100 { table -e } else { table }"
+# When a command is not found
+$env.config.hooks.command_not_found = []
+
+# The env_change hook accepts a record with environment variable names as keys, and a list
+# of hooks to run when that variable changes
+$env.config.hooks.env_change = {}
+
+# -----------
+# Keybindings
+# -----------
+# keybindings (list): A list of user-defined keybindings
+# Nushell/Reedline keybindings can be added or overridden using this setting.
+# See https://www.nushell.sh/book/line_editor.html#keybindings for details.
+#
+# Example - Add a new Alt+. keybinding to insert the last token used on the previous commandline
+$env.config.keybindings ++= [
+  {
+    name: insert_last_token
+    modifier: alt
+    keycode: char_.
+    mode: [emacs vi_normal vi_insert]
+    event: [
+      { edit: InsertString, value: "!$" }
+      { send: Enter }
+    ]
+  }
+]
+
+# Example: Override the F1 keybinding with a user-defined help menu (see "Menus" below):
+$env.config.keybindings ++= [
+  {
+    name: help_menu
+    modifier: none
+    keycode: f1
+    mode: [emacs, vi_insert, vi_normal]
+    event: { send: menu name: help_menu }
+  }
+]
+
+# -----
+# Menus
+# -----
+# menus (list):
+#
+# Nushell/Reedline menus can be created and modified using this setting.
+# See https://www.nushell.sh/book/line_editor.html#menus for details.
+#
+# Note that menus are usually activated via keybindings, which are defined in
+# $env.config.keybindings (above).
+#
+# Simple example - Add a new Help menu to the list (note that a similar menu is already
+# defined internally):
+$env.config.menus ++= [
+    {
+        name: help_menu
+        only_buffer_difference: true
+        marker: "? "
+        type: {
+            layout: description
+            columns: 4
+            # col_width is an optional value. If missing, the entire screen width is used to
+            # calculate the column width
+            col_width: 20
+            col_padding: 2
+            selection_rows: 4
+            description_rows: 10
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+    }
+]
+
+# ---------------
+# Plugin behavior
+# ---------------
+# Per-plugin configuration. See https://www.nushell.sh/contributor-book/plugins.html#plugin-configuration
+$env.config.plugins = {}
+
+# Plugin garbage collection configuration
+# $env.config.plugin_gc.*
+
+# enabled (bool): true/false to enable/disable stopping inactive plugins
+$env.config.plugin_gc.default.enabled = true
+# stop_after (duration): How long to wait after a plugin is inactive before stopping it
+$env.config.plugin_gc.default.stop_after = 10sec
+# plugins (record): Alternate garbage collection configuration per-plugin.
+$env.config.plugin_gc.plugins = {
+  # gstat: {
+  #   enabled: false
+  # }
+}
+
+# -------------------------------------
+# Themes/Colors and Syntax Highlighting
+# -------------------------------------
+# For more information on defining custom themes, see
+# https://www.nushell.sh/book/coloring_and_theming.html
+
+# Use and/or contribute to the theme collection at
+# https://github.com/nushell/nu_scripts/tree/main/themes
+
+# Values:
+
+# highlight_resolved_externals (bool):
+# true: Applies the `color_config.shape_external_resolved` color (below) to external commands
+#       which are found (resolved) on the path
+# false: Applies the `color_config.shape_external` color to *all* externals simply based on whether
+#        or not they would be *parsed* as an external command based on their position.
+# Defaults to false for systems with a slower search path
+$env.config.highlight_resolved_externals = true
+
+# color_config (record): A record of shapes, types, UI elements, etc. that can be styled (e.g.,
+# colorized) in Nushell, either on the commandline itself (shapes) or in output.
+#
+# Note that this is usually set through a theme provided by a record in a custom command. For
+# instance, the standard library contains two "starter" theme commands: "dark-theme" and
+# "light-theme". For example:
+use std/config dark-theme
+$env.config.color_config = (dark-theme)
+
+# Or, individual color settings can be configured or overridden.
+#
+# Values can be one of:
+# - A color name such as "red" (see `ansi -l` for a list)
+# - A color RGB value in the form of "#C4C9C6"
+# - A record including:
+#   * `fg` (color)
+#   * `bg` (color)
+#   * `attr`: a string with one or more of:
+#     - 'n': normal
+#     - 'b': bold
+#     - 'u': underline
+#     - 'r': reverse
+#     - 'i': italics
+#     - 'd': dimmed
+
+# foreground, background, and cursor colors are not handled by Nushell, but can be used by
+# custom-commands such as `theme` from the nu_scripts repository. That `theme` command can be
+# used to set the terminal foreground, background, and cursor colors.
+$env.config.color_config.foreground
+$env.config.color_config.background
+$env.config.color_config.cursor
+
+# -------------------------------------------------------------------------------------------------
+# shape_: Applies syntax highlighting based on the "shape" (inferred or declared type) of an
+# element on the commandline. Nushell's parser can identify shapes based on many criteria, often
+# as the commandline is being typed.
+
+# shape_string: Can appear as a single-or-quoted value, a bareword string, the key of a record,
+# an argument which has been declared as a string, and other parsed strings.
+$env.config.color_config.shape_string
+
+# shape_string_interpolation: A single-or-double-quoted string interpolation. This style
+# applies to the dollar sign and quotes of the string. The elements inside the string are
+# styled according to their own shape.
+$env.config.color_config.shape_string_interpolation
+
+# shape_raw_string: a raw string literal. E.g., r#'This is a raw string'#. This style applies
+# to the entire raw string.
+$env.config.color_config.shape_raw_string
+
+# shape_record: A record-literal. This style applies to the brackets around the record. The keys
+# and values will be styled according to their individual shapes.
+$env.config.color_config.shape_record
+
+# shape_list: A list-literal. This style applies to the brackets and list separator only. The
+# items in a list are styled according to their individual shapes.
+$env.config.color_config.shape_list
+
+# shape_table: A table-literl. Color applies to the brackets, semicolon, and list separators. The
+# items in the table are style according to their individual shapes.
+$env.config.color_config.shape_table
+
+# shape_bool: A boolean-literal `true` or `false` value
+$env.config.color_config.shape_bool
+
+# shape_int: Integer literals
+$env.config.color_config.shape_int
+
+# shape_float: Float literals. E.g., 5.4
+# Also integer literals in a float-argument position
+$env.config.color_config.shape_float
+
+# shape_range: Range literals
+$env.config.color_config.shape_range
+
+# shape_binary: Binary literals
+$env.config.color_config.shape_binary
+
+# shape_datetime: Datetime literals
+$env.config.color_config.shape_datetime
+
+# shape_custom: A custom value, usually from a plugin
+$env.config.color_config.shape_custom
+
+# shape_nothing: A literal `null`
+$env.config.color_config.shape_nothing
+
+# shape_literal: Not currently used
+$env.config.color_config.shape_literal
+
+# shape_operator: An operator such as +, -, ++, in, not-in, etc.
+$env.config.color_config.shape_operator
+
+# shape_filepath: An argument that appears in the position of a `path` shape for a command
+$env.config.color_config.shape_filepath
+
+# shape_directory: A more specific 'path' shape that only accepts a directory.
+$env.config.color_config.shape_directory
+
+# shape_globpattern: An argument in the position of a glob parameter. E.g., the asterisk (or any other string) in `ls *`.
+$env.config.color_config.shape_globpattern
+
+# shape_glob_interpolation: Deprecated
+$env.config.color_config.shape_glob_interpolation
+
+# shape_garbage: When an argument is of the wrong type or cannot otherwise be parsed.
+# E.g., `ls {a: 5}` - A record argument to `ls` is 'garbage'. Also applied in real-time when
+# an expression is not (yet) properly closed.
+$env.config.color_config.shape_garbage
+
+# shape_variable: The *use* of a variable. E.g., `$env` or `$a`.
+$env.config.color_config.shape_variable
+
+# shape_vardecl: The *declaration* of a variable. E.g. the "a" in `let a = 5`.
+$env.config.color_config.shape_vardecl
+
+# shape_matching_brackets: When the cursor is positioned on an opening or closing bracket (e.g,
+# braces, curly braces, or parenthesis), and there is a matching opening/closing bracket, both will
+# temporarily have this style applied.
+$env.config.color_config.shape_matching_brackets
+
+# shape_pipe: The pipe `|` when used to separate expressions in a pipeline
+$env.config.color_config.shape_pipe
+
+# shape_internalcall: A known Nushell built-in or custom command in the "command position" (usually
+# the first bare word of an expression).
+$env.config.color_config.shape_internalcall
+
+# shape_external: A token in the "command position" (see above) that is not a known Nushell
+# built-in or custom command. This is assumed to be an external command.
+$env.config.color_config.shape_external
+
+# shape_external_resolved: Requires "highlight_resolved_externals" (above) to be enabled.
+# When a token matches the "external" requirement (above) and is also a *confirmed* external
+# command, this style will be applied.
+$env.config.color_config.shape_external_resolved
+
+# shape_externalarg: Arguments to an external command (whether resolved or not)
+$env.config.color_config.shape_externalarg
+
+# shape_match_pattern: The matching pattern for each arm in a match expression. Does not
+# include the guard expression (if present).
+$env.config.color_config.shape_match_pattern
+
+# shape_block: The curly-braces around a block. Expressions within the block will have their
+# their own shapes' styles applied.
+$env.config.color_config.shape_block
+
+# shape_signature: The parameter definitions and input/output types for a command signature.
+$env.config.color_config.shape_signature
+
+# shape_keyword: Not current used
+$env.config.color_config.shape_keyword
+
+# shape_closure: Styles the brackets and arguments of a closure.
+$env.config.color_config.shape_closure
+
+# shape_direction: The redirection symbols such as `o>`, `error>`, `e>|`, etc.
+$env.config.color_config.shape_redirection
+
+# shape_flag: Flags and switches to internal and custom-commands. Only the `--flag` (`-f`) portion
+# is styled. The argument to a flag will be styled using its own shape.
+$env.config.color_config.shape_flag
+
+# -------------------------------------------------------------------------------------------------
+# color.config.<type>
+# *Values* of a particular *type* can be styled differently than the *shape*.
+# Note that the style is applied only when this type is displayed in *structured* data (list,
+# record, or table). It is not currently applied to basic raw values.
+#
+# Note that some types are rarely or never seen in a context in which styling would be applied.
+# For example, a cell-path *value* is unlikely to (but can) appear in a list, record, or table.
+#
+# Tip: In addition to the styles above (fg, bg, attr), types typically accept a closure which can
+# dynamically change the style based on the *value*. For instance, the themes in the nu_scripts
+# repository will style filesizes difference in an `ls` (or other table) differently depending on
+# their magnitude.
+
+# Simple examples:
+
+# bool: A boolean value
+$env.config.color_config.bool = {||
+  if $in {
+    {
+      bg: 'light_green'
+      fg: 'white'
+      attr: 'b'
+    }
+  } else {
+    {
+      bg: 'yellow'
+      fg: 'black'
+      attr: 'b'
+    }
+  }
+}
+
+# int: An integer value
+$env.config.color_config.int = {||
+  if $in == 42 { 'green' } else { 'red' }
+}
+
+# Additional type values (without examples):
+$env.config.color_config.string      # String
+$env.config.color_config.float       # Float value
+$env.config.color_config.glob        # Glob value (must be declared)
+$env.config.color_config.binary      # Binary value
+$env.config.color_config.custom      # Custom value (often from a plugin)
+$env.config.color_config.nothing     # Not used, since a null is not displayed
+$env.config.color_config.date        # datetime value
+$env.config.color_config.filesize    # filesize value
+$env.config.color_config.list        # Not currently used. Lists are displayed using their
+                                     # members' styles
+$env.config.color_config.record      # Not currently used. Records are displayed using their
+                                     # member's styles
+$env.config.color_config.duration    # Duration type
+$env.config.color_config.range       # Range value
+$env.config.color_config.cell-path   # Cell-path value
+$env.config.color_config.closure     # Not currently used
+$env.config.color_config.block       # Not currently used
+
+# Additional UI elements
+# hints: The (usually dimmed) style in which completion hints are displayed
+$env.config.color_config.hints
+
+# search_result: The style applied to `find` search results
+$env.config.color_config.search_result
+
+# header: The column names in a table header
+$env.config.color_config.header
+
+# separator: Used for table/list/record borders
+$env.config.color_config.separator
+
+# row_index: The `#` or `index` column of a table or list
+$env.config.color_config.row_index
+
+# empty: This style is applied to empty/missing values in a table. However, since the ❎
+# emoji is used for this purpose, there is limited styling that can be applied.
+$env.config.color_config.empty
+
+# leading_trailing_space_bg: When a string value inside structured data has leading or trailing
+# whitespace, that whitespace will be displayed using this style.
+# Use { attr: n } to disable.
+$env.config.color_config.leading_trailing_space_bg = { bg: 'red' }
+
+# banner_foreground: The default text style for the Welcome Banner displayed at startup
+$env.config.color_config.banner_foreground = "attr_normal"
+
+# banner_highlight1 and banner_highlight2: Colors for highlighted text in the Welcome Banner
+$env.config.color_config.banner_highlight1 = "green"
+$env.config.color_config.banner_highlight2 = "purple"
+
+# ------------------------
+# `explore` command colors
+# ------------------------
+# Configure the UI colors of the `explore` command
+# Allowed values are the same as for the `color_config` options above.
+# Example:
+$env.config.explore = {
+    status_bar_background: { fg: "#1D1F21", bg: "#C4C9C6" },
+    command_bar_text: { fg: "#C4C9C6" },
+    highlight: { fg: "black", bg: "yellow" },
+    status: {
+        error: { fg: "white", bg: "red" },
+        warn: {}
+        info: {}
+    },
+    selected_cell: { bg: light_blue },
+}
+
+# ---------------------------------------------------------------------------------------
+# Environment Variables
+# ---------------------------------------------------------------------------------------
+
+# In addition to the $env.config record, a number of other environment variables
+# also affect Nushell's behavior:
+
+# PROMPT_*
+# --------
+# Prompt configuration
+# PROMPT_ variables accept either a string or a closure that returns a string
+
+# PROMPT_COMMAND
+# --------------
+# Defines the primary prompt. Note that the PROMPT_INDICATOR (below) is appended to this value.
+# Simple example - Static string:
+$env.PROMPT_COMMAND = "Nushell"
+# Simple example - Dynamic closure displaying the path:
+$env.PROMPT_COMMAND = {|| pwd}
+
+# PROMPT_COMMAND_RIGHT
+# --------------------
+# Defines a prompt which will appear right-aligned in the terminal
+$env.PROMPT_COMMAND_RIGHT = {|| date now | format date "%d-%a %r" }
+
+# PROMPT_INDICATOR*
+# -----------------
+# The prompt indicators are environmental variables that represent
+# the state of the prompt. The specified character(s) will appear
+# immediately following the PROMPT_COMMAND
+
+# When in Emacs mode (default):
+$env.PROMPT_INDICATOR = "> "
+
+# When in normal vi mode:
+$env.PROMPT_INDICATOR_VI_NORMAL = "> "
+# When in vi insert-mode:
+$env.PROMPT_INDICATOR_VI_INSERT = ": "
+
+# When a commandline extends across multiple lines:
+$env.PROMPT_MULTILINE_INDICATOR = "::: "
+
+# TRANSIENT_PROMPT_*
+# ------------------
+# Allows a different prompt to be shown after a command has been executed.  This
+# can be useful if you have a 2-line prompt. Instead of each previously-entered
+# command taking up at least 2 lines, the transient prompt can condense it to a
+# shorter version. The following example shows a rocket emoji before each
+# previously-entered command:
+$env.TRANSIENT_PROMPT_COMMAND = "🚀 "
+$env.TRANSIENT_PROMPT_INDICATOR = ""
+$env.TRANSIENT_PROMPT_INDICATOR_VI_INSERT = ""
+$env.TRANSIENT_PROMPT_INDICATOR_VI_NORMAL = ""
+# Tip: Removing the transient multiline indicator and right-prompt can simplify
+#      copying from the terminal
+$env.TRANSIENT_PROMPT_MULTILINE_INDICATOR = ""
+$env.TRANSIENT_PROMPT_COMMAND_RIGHT = ""
+
+# ENV_CONVERSIONS
+# ---------------
+# Certain variables, such as those containing multiple paths, are often stored as a
+# colon-separated string in other shells. Nushell can convert these automatically to a
+# more convenient Nushell list.  The ENV_CONVERSIONS variable specifies how environment
+# variables are:
+# - converted from a string to a value on Nushell startup (from_string)
+# - converted from a value back to a string when running external commands (to_string)
+#
+# Note: The OS Path variable is automatically converted before env.nu loads, so it can
+# be treated a list in this file.
+#
+# Note: Environment variables are not case-sensitive, so the following will work
+# for both Windows and Unix-like platforms.
+#
+# By default, the internal conversion looks something like the following, so there
+# is no need to add this in your actual env.nu:
+$env.ENV_CONVERSIONS = {
+    "Path": {
+        from_string: { |s| $s | split row (char esep) | path expand --no-symlink }
+        to_string: { |v| $v | path expand --no-symlink | str join (char esep) }
+    }
+}
+
+# Here's an example converts the XDG_DATA_DIRS variable to and from a list:
+$env.ENV_CONVERSIONS = $env.ENV_CONVERSIONS | merge {
+    "XDG_DATA_DIRS": {
+        from_string: { |s| $s | split row (char esep) | path expand --no-symlink }
+        to_string: { |v| $v | path expand --no-symlink | str join (char esep) }
+    }
+}
+#
+# Other common directory-lists for conversion: TERMINFO_DIRS.
+# Note that other variable conversions take place after `config.nu` is loaded.
+
+# NU_LIB_DIRS
+# -----------
+# Directories in this constant are searched by the
+# `use` and `source` commands.
+#
+# By default, the `scripts` subdirectory of the default configuration
+# directory is included:
+const NU_LIB_DIRS = [
+    ($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
+    ($nu.data-dir | path join 'completions') # default home for nushell completions
+]
+# You can replace (override) or append to this list by shadowing the constant
+const NU_LIB_DIRS = $NU_LIB_DIRS ++ [($nu.default-config-dir | path join 'modules')]
+
+# An environment variable version of this also exists. It is searched after the constant.
+$env.NU_LIB_DIRS ++= [ ($nu.data-dir | path join "nu_scripts") ]
+
+# NU_PLUGIN_DIRS
+# --------------
+# Directories to search for plugin binaries when calling add.
+
+# By default, the `plugins` subdirectory of the default configuration
+# directory is included:
+const NU_PLUGIN_DIRS = [
+    ($nu.default-config-dir | path join 'plugins') # add <nushell-config-dir>/plugins
+]
+# You can replace (override) or append to this list by shadowing the constant
+const NU_PLUGIN_DIRS = $NU_PLUGIN_DIRS ++ [($nu.default-config-dir | path join 'plugins')]
+
+# As with NU_LIB_DIRS, an $env.NU_PLUGIN_DIRS is searched after the constant version
+
+# Appending to the OS path is a common configuration task.
+# Because of the previous ENV_CONVERSIONS (performed internally
+# before your config.nu loads), the path variable is a list that can
+# be appended to using, for example:
+$env.PATH ++= [ "~/.local/bin" ]
+
+# Or prepend using
+$env.PATH = [ "~/.local/bin" ] ++ $env.PATH
+
+# The `path add` function from the Standard Library also provides
+# a convenience method for prepending to the path:
+use std/util "path add"
+path add "~/.local/bin"
+path add ($env.CARGO_HOME | path join "bin")
+
+# You can remove duplicate directories from the path using:
+$env.PATH = ($env.PATH | uniq)
+
@@ -2,6 +2,5 @@
  programs.nushell = {
    enable = true;
    configFile.source = ./config.nu;
-    envFile.source = ./env.nu;
  };
-}
+}
@@ -1,36 +0,0 @@
-# Nushell Environment Config File
-
-# Specifies how environment variables are:
-# - converted from a string to a value on Nushell startup (from_string)
-# - converted from a value back to a string when running external commands (to_string)
-# Note: The conversions happen *after* config.nu is loaded
-let-env ENV_CONVERSIONS = {
-  "PATH": {
-    from_string: { |s| $s | split row (char esep) | path expand -n }
-    to_string: { |v| $v | path expand -n | str join (char esep) }
-  }
-  "Path": {
-    from_string: { |s| $s | split row (char esep) | path expand -n }
-    to_string: { |v| $v | path expand -n | str join (char esep) }
-  }
-}
-
-# Directories to search for scripts when calling source or use
-#
-# By default, <nushell-config-dir>/scripts is added
-let-env NU_LIB_DIRS = [
-    ($nu.config-path | path dirname | path join 'scripts')
-]
-
-# Directories to search for plugin binaries when calling register
-#
-# By default, <nushell-config-dir>/plugins is added
-let-env NU_PLUGIN_DIRS = [
-    ($nu.config-path | path dirname | path join 'plugins')
-]
-
-# To add entries to PATH (on Windows you might use Path), you can use the following pattern:
-# let-env PATH = ($env.PATH | split row (char esep) | prepend '/some/path')
-
-mkdir ~/.cache/starship
-starship init nu | sed "s/size -c/size/" | save ~/.cache/starship/init.nu
@@ -3,6 +3,9 @@

  programs.starship = {
    enable = true;
+    enableBashIntegration = true;
+    enableZshIntegration = true;
+    enableNushellIntegration = true;
    settings = {
      character = {
        success_symbol = "[›](bold green)";
@@ -10,4 +13,4 @@
      };
    };
  };
-}
+}
@@ -1,18 +1,18 @@
 # Edit this configuration file to define what should be installed on
 # your system.  Help is available in the configuration.nix(5) man page
 # and in the NixOS manual (accessible by running ‘nixos-help’).
-
-{ config, pkgs, ... }:
-
 {
-  imports =
-    [
-      ../../modules/system.nix
-      ../../modules/i3.nix
+  config,
+  pkgs,
+  ...
+}: {
+  imports = [
+    ../../modules/system.nix
+    ../../modules/i3.nix

-      # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];

  # Bootloader.
  boot.loader = {
@@ -48,8 +48,5 @@
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "22.11"; # Did you read the comment?
-
+  system.stateVersion = "25.05"; # Did you read the comment?
 }
-
-
@@ -1,18 +1,18 @@
 # Edit this configuration file to define what should be installed on
 # your system.  Help is available in the configuration.nix(5) man page
 # and in the NixOS manual (accessible by running ‘nixos-help’).
-
-{ config, pkgs, ... }:
-
 {
-  imports =
-    [
-      ../../modules/system.nix
-      ../../modules/i3.nix
+  config,
+  pkgs,
+  ...
+}: {
+  imports = [
+    ../../modules/system.nix
+    ../../modules/i3.nix

-      # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];

  # Bootloader.
  boot.loader = {
@@ -22,7 +22,7 @@
    # };
    grub = {
      enable = true;
-      device = "/dev/sda";  #  "nodev"
+      device = "/dev/sda"; #  "nodev"
      efiSupport = false;
      useOSProber = true;
      #efiInstallAsRemovable = true; # in case canTouchEfiVariables doesn't work for your system
@@ -46,8 +46,5 @@
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "22.11"; # Did you read the comment?
-
+  system.stateVersion = "25.05"; # Did you read the comment?
 }
-
-
@@ -1,10 +1,7 @@
-{pkgs, ...}:
-
-
-{
-
+{pkgs, ...}: {
  # i3 related options
-  environment.pathsToLink = [ "/libexec" ]; # links /libexec from derivations to /run/current-system/sw
+  environment.pathsToLink = ["/libexec"]; # links /libexec from derivations to /run/current-system/sw
+  services.displayManager.defaultSession = "none+i3";
  services.xserver = {
    enable = true;

@@ -13,36 +10,35 @@
    };

    displayManager = {
-        defaultSession = "none+i3";
-        lightdm.enable = false;
-        gdm.enable = true;
+      lightdm.enable = false;
+      gdm.enable = true;
    };

    windowManager.i3 = {
      enable = true;
      extraPackages = with pkgs; [
-        rofi          # application launcher, the same as dmenu
-        dunst         # notification daemon
-        i3blocks      # status bar
-        i3lock        # default i3 screen locker
-        xautolock     # lock screen after some time
-        i3status      # provide information to i3bar
-        i3-gaps       # i3 with gaps
-        picom         # transparency and shadows
-        feh           # set wallpaper
-        acpi          # battery information
-        arandr        # screen layout manager
-        dex           # autostart applications
-        xbindkeys     # bind keys to commands
-        xorg.xbacklight  # control screen brightness
-        xorg.xdpyinfo      # get screen information
-        sysstat       # get system information
-     ];
+        rofi # application launcher, the same as dmenu
+        dunst # notification daemon
+        i3blocks # status bar
+        i3lock # default i3 screen locker
+        xautolock # lock screen after some time
+        i3status # provide information to i3bar
+        i3-gaps # i3 with gaps
+        picom # transparency and shadows
+        feh # set wallpaper
+        acpi # battery information
+        arandr # screen layout manager
+        dex # autostart applications
+        xbindkeys # bind keys to commands
+        xorg.xbacklight # control screen brightness
+        xorg.xdpyinfo # get screen information
+        sysstat # get system information
+      ];
    };

    # Configure keymap in X11
-    layout = "us";
-    xkbVariant = "";
+    xkb.layout = "us";
+    xkb.variant = "";
  };

  # thunar file manager(part of xfce) related options
@@ -52,4 +48,4 @@
  ];
  services.gvfs.enable = true; # Mount, trash, and other functionalities
  services.tumbler.enable = true; # Thumbnail support for images
-}
+}
@@ -1,6 +1,53 @@
-{ config, pkgs, ... }:
-
 {
+  pkgs,
+  lib,
+  username,
+  ...
+}: {
+  # ============================= User related =============================
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.${username} = {
+    isNormalUser = true;
+    description = username;
+    extraGroups = ["networkmanager" "wheel"];
+  };
+  # given the users in this list the right to specify additional substituters via:
+  #    1. `nixConfig.substituers` in `flake.nix`
+  #    2. command line args `--options substituers http://xxx`
+  nix.settings.trusted-users = [username];
+
+  # customise /etc/nix/nix.conf declaratively via `nix.settings`
+  nix.settings = {
+    # enable flakes globally
+    experimental-features = ["nix-command" "flakes"];
+
+    substituters = [
+      # cache mirror located in China
+      # status: https://mirror.sjtu.edu.cn/
+      "https://mirror.sjtu.edu.cn/nix-channels/store"
+      # status: https://mirrors.ustc.edu.cn/status/
+      # "https://mirrors.ustc.edu.cn/nix-channels/store"
+
+      "https://cache.nixos.org"
+    ];
+
+    trusted-public-keys = [
+      "cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
+    ];
+    builders-use-substitutes = true;
+  };
+
+  # do garbage collection weekly to keep disk usage low
+  nix.gc = {
+    automatic = lib.mkDefault true;
+    dates = lib.mkDefault "weekly";
+    options = lib.mkDefault "--delete-older-than 7d";
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
  # Set your time zone.
  time.timeZone = "Asia/Shanghai";

@@ -21,33 +68,36 @@

  # Enable CUPS to print documents.
  services.printing.enable = true;
-  

  fonts = {
-    fonts = with pkgs; [
+    packages = with pkgs; [
      # icon fonts
      material-design-icons

      # normal fonts
      noto-fonts
-      noto-fonts-cjk
+      noto-fonts-cjk-sans
      noto-fonts-emoji

      # nerdfonts
-      (nerdfonts.override { fonts = [ "FiraCode" "JetBrainsMono" ]; })
+      # https://github.com/NixOS/nixpkgs/blob/nixos-unstable-small/pkgs/data/fonts/nerd-fonts/manifests/fonts.json
+      nerd-fonts.symbols-only # symbols icon only
+      nerd-fonts.fira-code
+      nerd-fonts.jetbrains-mono
+      nerd-fonts.iosevka
    ];

    # use fonts specified by user rather than default ones
-    enableDefaultFonts = false;
+    enableDefaultPackages = false;

    # user defined fonts
    # the reason there's Noto Color Emoji everywhere is to override DejaVu's
    # B&W emojis that would sometimes show instead of some Color emojis
    fontconfig.defaultFonts = {
-      serif = [ "Noto Serif" "Noto Color Emoji" ];
-      sansSerif = [ "Noto Sans" "Noto Color Emoji" ];
-      monospace = [ "JetBrainsMono Nerd Font" "Noto Color Emoji" ];
-      emoji = [ "Noto Color Emoji" ];
+      serif = ["Noto Serif" "Noto Color Emoji"];
+      sansSerif = ["Noto Sans" "Noto Color Emoji"];
+      monospace = ["JetBrainsMono Nerd Font" "Noto Color Emoji"];
+      emoji = ["Noto Color Emoji"];
    };
  };

@@ -63,15 +113,12 @@
    enable = true;
    settings = {
      X11Forwarding = true;
-      PermitRootLogin = "no";         # disable root login
+      PermitRootLogin = "no"; # disable root login
      PasswordAuthentication = false; # disable password login
    };
    openFirewall = true;
  };

-  # Allow unfree packages
-  nixpkgs.config.allowUnfree = true;
-
  # List packages installed in system profile. To search, run:
  # $ nix search wget
  environment.systemPackages = with pkgs; [
@@ -80,25 +127,24 @@
    curl
    git
    sysstat
-    lm_sensors  # for `sensors` command
+    lm_sensors # for `sensors` command
    # minimal screen capture tool, used by i3 blur lock to take a screenshot
    # print screen key is also bound to this tool in i3 config
    scrot
    neofetch
-    xfce.thunar  # xfce4's file manager
-    nnn          # terminal file manager
+    xfce.thunar # xfce4's file manager
+    nnn # terminal file manager
  ];

  # Enable sound with pipewire.
-  sound.enable = true;
-  hardware.pulseaudio.enable = false;
+  services.pulseaudio.enable = false;
  services.power-profiles-daemon = {
    enable = true;
  };
  security.polkit.enable = true;

  services = {
-    dbus.packages = [ pkgs.gcr ];
+    dbus.packages = [pkgs.gcr];

    geoclue2.enable = true;

@@ -115,16 +161,6 @@
      #media-session.enable = true;
    };

-    udev.packages = with pkgs; [ gnome.gnome-settings-daemon ];
+    udev.packages = with pkgs; [gnome-settings-daemon];
  };
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  users.users.ryan = {
-    isNormalUser = true;
-    description = "ryan";
-    extraGroups = [ "networkmanager" "wheel" ];
-    openssh.authorizedKeys.keys = [
-        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJx3Sk20pLL1b2PPKZey2oTyioODrErq83xG78YpFBoj admin@ryan-MBP"
-    ];
-  };
-}
+}
@@ -0,0 +1,22 @@
+{pkgs, ...}: {
+  ##################################################################################################################
+  #
+  # All Ryan's Home Manager Configuration
+  #
+  ##################################################################################################################
+
+  imports = [
+    ../../home/core.nix
+
+    ../../home/fcitx5
+    ../../home/i3
+    ../../home/programs
+    ../../home/rofi
+    ../../home/shell
+  ];
+
+  programs.git = {
+    userName = "Ryan Yin";
+    userEmail = "xiaoyin_c@qq.com";
+  };
+}
@@ -0,0 +1,14 @@
+{
+  ##################################################################################################################
+  #
+  # NixOS Configuration
+  #
+  ##################################################################################################################
+
+  users.users.ryan = {
+    # Ryan's authorizedKeys
+    openssh.authorizedKeys.keys = [
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJx3Sk20pLL1b2PPKZey2oTyioODrErq83xG78YpFBoj ryan@ryan"
+    ];
+  };
+}
@@ -0,0 +1,22 @@
+{pkgs, ...}: {
+  ##################################################################################################################
+  #
+  # All Suzi's Home Manager Configuration
+  #
+  ##################################################################################################################
+
+  imports = [
+    ../../home/core.nix
+
+    ./fcitx5
+    ./i3
+    ./programs
+    ./rofi
+    ./shell
+  ];
+
+  programs.git = {
+    userName = "Suzi";
+    userEmail = "suzi@writefor.fun";
+  };
+}
@@ -0,0 +1,14 @@
+{
+  ##################################################################################################################
+  #
+  # NixOS Configuration
+  #
+  ##################################################################################################################
+
+  users.users.suzi = {
+    # Suzi's authorizedKeys
+    openssh.authorizedKeys.keys = [
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJx3Sk20pLL1b2PPKZey2oTyioODrErq83xG78YpFBoj suzi@suzi"
+    ];
+  };
+}
Author	SHA1	Message	Date
Ryan Yin	b9c1b10135	fix: issue #202	2025-07-12 15:55:13 +08:00
Ryan Yin	d4847c44ce	Merge pull request #191 from ryan4yin/i3-kickstarter-nixos-25.05 feat: upgrade to nixos-25.05	2025-05-29 12:25:29 +08:00
Ryan Yin	1f0a26524b	fix: issues after upgrade nixos	2025-05-29 12:23:29 +08:00
Ryan Yin	7dc769aad2	fix: command in README	2025-05-29 12:14:13 +08:00
Ryan Yin	938cf720fd	feat: upgrade to nixos-25.05	2025-05-29 12:04:56 +08:00
Ryan Yin	7a5587d14d	fix: typo #190	2025-05-29 12:03:21 +08:00
Ryan Yin	d384607345	feat: bump nixos to 24.05	2024-08-16 11:18:35 +08:00
Ryan Yin	adc91138c5	feat: multi user	2024-08-16 10:55:54 +08:00
Ryan Yin	42bcfeb47c	feat: add gitignore	2024-08-16 10:15:54 +08:00
Ryan Yin	82b65f7753	feat: upgrade to nixos-23.11	2023-12-09 22:58:13 +08:00
Ryan Yin	5237bf31c5	nix.settings.substituters(system-level) & nixConfig.extra-substituers(flake-only)	2023-12-09 16:16:22 +08:00
Ryan Yin	abdf6d181b	fix: set this variable make i3 failed to start XAUTHORITY	2023-09-11 00:25:03 +08:00