fix(youko): drop pcie_aspm=off, re-assert the hdparm settings hourly

pcie_aspm=off was the least-justified mitigation (the flakiness is on the
USB/SATA side) and costs power. Also log the disks' APM level/state and
re-apply the settings hourly, since the bridge or the disk firmware can
drop them (the disks were still reaching standby).
This commit is contained in:
Ryan Yin committed 2026-09-21 17:42:21 +08:00
1 parent 45a35a080d
commit 899162055a
1 file changed
+19 -4
+19 -4
View File
@@ -40,7 +40,6 @@ in
# It is a JMicron JMS567 that resets and throws link (UDMA-CRC) + I/O errors.
"usbcore.autosuspend=-1" # no USB autosuspend
"usb-storage.delay_use=10" # give the bridge time to settle after probing
"pcie_aspm=off" # ASPM can also make the link flap
];
# Keep the bridge powered: a suspended device is what most often triggers a
@@ -50,7 +49,10 @@ in
'';
# A spindown/spinup is a common trigger for the bridge resetting, so disable
# APM/standby on the HDDs. Best effort: hdparm may not get through the bridge.
# APM/standby on the HDDs. sdb in particular has ~1M load cycles (WD
# Intellipark), so stopping the idle head-parking also saves its mechanism.
# Read the settings back into the journal, and re-assert them hourly: the
# bridge or the disk's own firmware can drop them.
systemd.services.hdd-no-spindown = {
description = "Disable APM/standby on the USB HDDs";
after = [ "local-fs.target" ];
@@ -60,11 +62,24 @@ in
RemainAfterExit = true;
};
script = ''
${pkgs.hdparm}/bin/hdparm -B 255 -S 0 ${hddPublic} || true
${pkgs.hdparm}/bin/hdparm -B 255 -S 0 ${hddEncrypted} || true
for d in ${hddPublic} ${hddEncrypted}; do
echo "== $d =="
${pkgs.hdparm}/bin/hdparm -B 255 -S 0 "$d" || true
${pkgs.hdparm}/bin/hdparm -B "$d" || true
${pkgs.hdparm}/bin/hdparm -C "$d" || true
done
'';
};
systemd.timers.hdd-no-spindown = {
wantedBy = [ "timers.target" ];
timerConfig = {
OnBootSec = "10min";
OnUnitActiveSec = "1h";
Persistent = true;
};
};
# Watch the disks with SMART. UDMA_CRC_Error_Count growth is the early warning
# for the bridge/link problem.
services.smartd = {