Files
komorebi/e2e/platforms/qemu_windows/W0.md
T
LGUG2Z 0c6864b4bc feat(e2e): add the W0 probe for a Windows 11 guest under QEMU
An unattended install of the Windows 11 evaluation ISO under QEMU with nested
KVM on WSL2, and a boot script that times the golden image to a desktop.
Measured: install 21.6 min, desktop in 36 to 51 s, with other VMs running.
W0.md records the numbers and what was found on the way: no SMM under nested
SVM, so no secure-boot OVMF; the firmware needs TPM support for Setup to see
the TPM; and the evaluation reads as expired unless the guest clock is set
back.
2026-10-30 18:22:44 -07:00

54 lines
2.7 KiB
Markdown

# W0: Windows 11 under QEMU and nested KVM on WSL2
Measured 2026-10-28 on the WSL2 machine (AMD Ryzen 9 5900X, 24 vCPU, 31 GB,
kernel 6.18.54.1-microsoft-standard-WSL2, `nestedVirtualization=true`),
QEMU 10.2.2, swtpm 0.10.1, OVMF 202602, Windows 11 Enterprise Evaluation
build 26100.1742 (the `go.microsoft.com/fwlink/?linkid=2289031` ISO, 5.4 GB).
Guest: 4 vCPU, 6 GB, NVMe disk, e1000e, VGA, `-cpu host`.
**Other VMs were running on the machine during every number below** (the
kfde session's NixOS suites, about 5 cores busy), so these are pessimistic.
| What | Result |
|---|---|
| Unattended install, ISO to shutdown | 1295 s (21.6 min) |
| Boot to a desktop, golden image on an overlay | wallpaper 36 s, taskbar 51 s |
| Run dialog after Win+R through QMP | on screen within 1.5 s |
Verdict: usable. Nothing here says the Windows half must stop.
## Findings that change the plan
- **No SMM under nested SVM.** The secure-boot OVMF (`OVMF_CODE.ms.fd`,
`smm=on`) stops the guest at once: `KVM: entry failed, hardware error
0xffffffff` with `SMM=1`. Run `smm=off` with an OVMF built without
secure boot. So the guest has no Secure Boot, and Setup is told so with
`LabConfig\BypassSecureBootCheck` from the answer file. This is what
`dockur/windows` does in its default mode too.
- **The firmware needs TPM support, not only the device.** With nixpkgs'
default `OVMF`, Setup reports `TpmVersion: 0` (a hard block) even though
swtpm and `tpm-crb` are wired: nothing starts the TPM. `OVMF.override {
tpmSupport = true; }` fixes it. `BypassTPMCheck` did not help.
- **The evaluation says "Windows License is expired"** on the first boot: the
ISO is a 2024 build and the guest clock is the host's. Starting the guest
with `-rtc base=2024-10-01T00:00:00` makes it say "Windows License valid
for 90 days" (checked once, by screenshot). Every run needs that flag, or a
newer ISO.
- **A second display head is not shown to work.** `-device secondary-vga`
gives QMP a second screendump target (`device=vga2`), but it only ever
showed the firmware text; whether Windows treats it as a monitor is
unknown, and needs the agent's `displays` verb. The virtio-gpu route
needs the virtio-win driver in the image.
- QMP `screendump` (png), `send-key` and the typing helper `qmp-type.pl`
work, including inside Windows Setup (Shift+F10 gives a console), which is
how the two blocks above were diagnosed.
## Not verified
- That `setup.ps1` ran (UAC, lock screen, Defender, Windows Update): the
guest has no agent yet, and the desktop screenshot cannot show it.
- Second boot from the golden image without the answer ISO attached: done,
but only on an overlay, once.
- Responsiveness under load other than the above, and any run with the
daemon in the guest.