mirror of
https://github.com/LGUG2Z/komorebi.git
synced 2026-11-20 15:41:38 +01:00
KWin has no protocol that lets another process read or set the geometry of a window, but its scripting API has both, and a signal for every change the window manager follows. So the KWin backend is in two parts: bridge.js, a script the daemon loads into KWin, which reports what KWin sees and holds no window manager logic, and a D-Bus service in the daemon, org.komorebi.Bridge, which the script calls with every event as a JSON string. Every decision about what an event means is made by the table in kwin::state, which is pure and is unit-tested with the JSON the script sends: which windows may be managed, the ids komorebi gives KWin's windows, and the Show, Destroy, FocusChange, Minimize and Restore events of the window manager. Events reach the window manager in the order KWin raised them: the Event interface handles its calls inline (zbus reordered them otherwise), and one channel and one thread, window_manager_event_listener and listen_for_events, carry them on. Commands go to the script as the answer to a Poll call that the script always has open and the daemon holds until it has something to send: in the spikes this was as fast as any other channel, and it makes one call every 10 seconds when nothing happens. Here the only command is the cursor query. Every command of the Backend trait is refused with "the KWin backend only reads the desktop", so the daemon follows KWin and moves nothing. The bridge is JavaScript that KWin runs as it is, and it gets types and tests without a JavaScript build chain. tsc checks it as strict TypeScript through JSDoc types of every message, against kwin-api.d.ts, a declaration of the part of KWin's scripting API it uses, in which every property is read-only and callDBus takes one string. bridge.test.js runs it under node --test against a fake KWin in a node:vm context. The messages of a session are JSON fixtures that both sides' tests read: the bridge's tests check that it sends those events, and the table's and the backend's tests read the same events and commands, so a message cannot change on one side alone. just check-js and the flake's komorebi-bridge-js check run both, with nodejs and typescript from nixpkgs; there is no package.json. The daemon now connects to KWin by default, and --fake-backend is hidden. The VM suite vm-kwin-events starts it against a headless KWin and checks, from its debug log, that the script loads and reports what was open, that KWin's signals arrive as events and in order, and that stopping the daemon unloads the script. docs/dev/PLATFORM.md starts with what komorebi needs from Plasma. zbus 5's zvariant, zbus_names and zvariant_derive are flagged unmaintained, since their code moved into zbus 6; deny.toml ignores the three advisories.
201 lines
9.4 KiB
Markdown
201 lines
9.4 KiB
Markdown
# Platform
|
|
|
|
komorebi for KDE runs in a KDE Plasma session, as a client of KWin. Most of the details on
|
|
this page are also written down next to the code that depends on them; this page
|
|
centralizes them: which KWin it needs, how it finds it, what it creates in the session and
|
|
leaves behind, every environment variable it reads, and what happens when something is
|
|
missing.
|
|
|
|
Facts that change with KWin and Plasma releases are dated. Unless a fact says otherwise, it
|
|
was measured with KWin 6.8.1, Plasma 6.8.1 and Qt 6.12.0 from nixpkgs `d3b13ad`
|
|
(2026-10-24), in NixOS virtual machines under QEMU on an Apple silicon Mac (HVF).
|
|
|
|
## Vocabulary
|
|
|
|
- **Session**: one user's Plasma login: KWin, the Plasma shell, and a D-Bus session bus they
|
|
share.
|
|
- **Session bus**: the D-Bus bus of the session. komorebi and KWin talk over it.
|
|
- **KWin**: the compositor and window manager of Plasma, `kwin_wayland`.
|
|
- **Script**: a JavaScript program that KWin runs inside itself, through its scripting API.
|
|
komorebi's is the **bridge**, [`bridge.js`](../../komorebi/src/kwin/bridge.js).
|
|
- **Output**: KWin's name for a monitor.
|
|
- **Headless KWin**: `kwin_wayland --virtual`, a KWin with virtual outputs and no display,
|
|
which the VM tests run ([vm-tests.md](vm-tests.md)).
|
|
|
|
## What komorebi needs
|
|
|
|
### KWin 6.8 or newer
|
|
|
|
KWin 6.8 is the oldest KWin komorebi supports. The bridge reads the work area of each output
|
|
for the virtual desktop that output shows (`workspace.currentDesktopForScreen`), which is part
|
|
of the per-output virtual desktops KWin 6.8 introduced. At time of writing (2026-10-27) KWin
|
|
6.8.1 is the only version komorebi has been run against; 6.7 and older have not been tried.
|
|
|
|
### Wayland
|
|
|
|
komorebi runs in a Plasma Wayland session. There is no X11 session of Plasma 6.8 to run it in.
|
|
Programs that run on XWayland inside the Wayland session are windows like any other; KWin
|
|
reports their X11 class (`XTerm`) where a Wayland client has its app id (`foot`,
|
|
`org.kde.konsole`).
|
|
|
|
### The session bus
|
|
|
|
komorebi finds KWin on the session bus, and nowhere else. It needs to own the name
|
|
`org.komorebi.Bridge` there, and KWin has to own `org.kde.KWin`. See
|
|
[`DBUS_SESSION_BUS_ADDRESS`](#dbus_session_bus_address) for how the bus is found.
|
|
|
|
## Environments
|
|
|
|
The same questions, for each place the daemon can be started:
|
|
|
|
1. How it finds KWin.
|
|
2. What it does there.
|
|
3. What it leaves behind.
|
|
|
|
### A Plasma session
|
|
|
|
#### How komorebi finds KWin
|
|
|
|
Through the session bus. When the daemon is started from the session (a terminal, an
|
|
autostart entry, a user unit of the session), the bus is already in its environment.
|
|
|
|
#### What komorebi does
|
|
|
|
It connects to the session bus as `org.komorebi.Bridge`, writes the bridge to
|
|
`$XDG_RUNTIME_DIR/komorebi/bridge.js`, and asks KWin to load it under the name
|
|
`komorebi-bridge`, replacing a script of that name left by an earlier run. The script reports
|
|
the windows and outputs it finds, and from then on every window that opens, closes, takes the
|
|
focus, is minimized or brought back, moves or changes size. The daemon waits up to 10 seconds
|
|
for the first report and does not start without it.
|
|
|
|
The KWin backend only reads the desktop. Every command the window manager gives it (move,
|
|
focus, raise, minimize, close a window, move the pointer) fails with "the KWin backend only
|
|
reads the desktop", which the window manager logs.
|
|
|
|
#### What komorebi leaves behind
|
|
|
|
When it is stopped with `SIGINT` or `SIGTERM` it asks KWin to unload the script. The file
|
|
`bridge.js` stays in the runtime directory, which is removed at logout. A daemon that is
|
|
killed leaves the script running in KWin, reporting to nobody, until the next start replaces
|
|
it or the session ends.
|
|
|
|
### A headless KWin
|
|
|
|
`kwin_wayland --virtual` behaves like the KWin of a session for everything komorebi does:
|
|
the VM tests run the daemon against one, on a private session bus of its own. It cannot draw
|
|
(see [Rendering](#rendering-in-virtual-machines-and-over-rdp)), so nothing that depends on
|
|
pixels can be tested against it.
|
|
|
|
### No KWin
|
|
|
|
Anywhere else (a session that is not Plasma, a Linux console, a Mac), the daemon exits with an
|
|
error that names what is missing:
|
|
|
|
- "could not connect to the session bus as org.komorebi.Bridge": there is no session bus at
|
|
the address the environment gives, or another komorebi owns the name.
|
|
- "KWin is not on the session bus": the bus is there and KWin is not.
|
|
- "KWin loaded the bridge script but it never reported in": KWin is there, and the script did
|
|
not run. KWin logs a script's errors to the journal (`journalctl --user -t kwin_wayland`).
|
|
|
|
`komorebi --fake-backend` runs the window manager against an in-memory desktop instead, which
|
|
works anywhere, for development and testing.
|
|
|
|
## D-Bus
|
|
|
|
What komorebi owns, on the session bus:
|
|
|
|
| Name | Object | Interface | Member | Called by |
|
|
|---|---|---|---|---|
|
|
| `org.komorebi.Bridge` | `/org/komorebi/Bridge` | `org.komorebi.Bridge` | `Event(s)` | the bridge, for every event |
|
|
| `org.komorebi.Bridge` | `/org/komorebi/Bridge/Poll` | `org.komorebi.Bridge.Poll` | `Poll(s) -> s` | the bridge, for commands |
|
|
|
|
Both take a JSON string. `Poll` is held: the daemon answers it when it has commands for the
|
|
bridge, or with an empty list after 10 seconds, and the bridge then calls it again.
|
|
|
|
What komorebi calls:
|
|
|
|
| Name | Object | Interface | Member | When |
|
|
|---|---|---|---|---|
|
|
| `org.kde.KWin` | `/Scripting` | `org.kde.kwin.Scripting` | `unloadScript(s)`, `loadScript(ss) -> i` | at start; `unloadScript` again at exit |
|
|
| `org.kde.KWin` | `/Scripting/Script<id>` | `org.kde.kwin.Script` | `run()` | at start |
|
|
|
|
## Files and directories
|
|
|
|
| Path | What | Lifetime |
|
|
|---|---|---|
|
|
| `$XDG_RUNTIME_DIR/komorebi/bridge.js` | the script KWin loads, with its configuration (the D-Bus names and the hold time of `Poll`) on its first line | written at every start; the directory is removed at logout |
|
|
|
|
Without `XDG_RUNTIME_DIR` the directory is `komorebi` in the local data directory instead
|
|
(see [`XDG_DATA_HOME`](#xdg_data_home)).
|
|
|
|
## Environment variables
|
|
|
|
### `DBUS_SESSION_BUS_ADDRESS`
|
|
|
|
The address of the session bus. If it is not set, komorebi uses `$XDG_RUNTIME_DIR/bus`, where
|
|
systemd puts the session bus, and `/run/user/<uid>/bus` when `XDG_RUNTIME_DIR` is not set
|
|
either. An address with no bus behind it is the first error under [No KWin](#no-kwin).
|
|
|
|
### `XDG_RUNTIME_DIR`
|
|
|
|
The runtime directory of the user, normally `/run/user/<uid>`: komorebi writes the bridge to
|
|
the `komorebi` directory in it.
|
|
|
|
### `XDG_DATA_HOME`
|
|
|
|
Read only when `XDG_RUNTIME_DIR` is not set: the bridge is then written to
|
|
`$XDG_DATA_HOME/komorebi` (`~/.local/share/komorebi` if `XDG_DATA_HOME` is not set either).
|
|
|
|
### `RUST_LOG`
|
|
|
|
Which log lines the daemon prints, in the syntax of `tracing-subscriber`'s `EnvFilter`
|
|
(`komorebi=debug`, `komorebi::kwin=trace`). If it is not set, `--log-level` sets it to
|
|
`komorebi=<level>`; `--log-level` defaults to `info`.
|
|
|
|
### `RUST_LIB_BACKTRACE`
|
|
|
|
Whether an error carries a backtrace. komorebi sets it to `1` when it is not set.
|
|
|
|
### `NO_COLOR`
|
|
|
|
When set to anything but the empty string, the log has no ANSI colors, which is what a log
|
|
written to a file wants. The VM tests set it.
|
|
|
|
## The bridge's environment
|
|
|
|
What the KWin scripting API offers a script, and what it does not, at time of writing
|
|
(2026-10-27). The bridge is written around these, and
|
|
[`kwin-api.d.ts`](../../komorebi/src/kwin/kwin-api.d.ts) declares the part of the API it
|
|
uses, which `tsc` checks it against with ECMAScript 2016's library and nothing else. Node and
|
|
TypeScript are needed only for those checks: in the session the bridge needs KWin alone.
|
|
|
|
- `callDBus` sends a JavaScript number as a 32-bit integer, and a call whose arguments do not
|
|
match the method's signature fails without a word. The bridge sends every argument as a
|
|
JSON string.
|
|
- The callback of `callDBus` is called on success only. A call that fails (the daemon has
|
|
exited) is never answered, so the bridge re-issues `Poll` from a one-second `QTimer` when
|
|
the last one is older than the hold time plus 3 seconds.
|
|
- There is a `QTimer`, but no `setTimeout`, and no `Qt` global: a rectangle is assigned as a
|
|
plain `{x, y, width, height}` object.
|
|
- KWin activates a new window before it announces it (`windowActivated` comes before
|
|
`windowAdded`). The bridge announces a window it has not seen when it is activated, so that
|
|
no event names a window before the event that announces it.
|
|
- A script's `print()` goes to KWin's log, which shows it only when the `kwin_scripting`
|
|
logging category is enabled (`QT_LOGGING_RULES="kwin_scripting.debug=true"`, as the VM
|
|
tests do).
|
|
|
|
## Rendering in virtual machines and over RDP
|
|
|
|
At time of writing (2026-10-27):
|
|
|
|
- A headless KWin cannot render. Mesa's software rasterizer needs `CREATE_DUMB` on the
|
|
primary DRM node and the virtual backend offers only the render node, so KWin reports that
|
|
compositing is active while every frame fails, and screenshots are black. KWin does not start at all with no DRM
|
|
device. The VM nodes give the guest a `virtio-gpu` device for that reason.
|
|
- In a QEMU guest everything is drawn in software (llvmpipe on the guest's CPUs): the
|
|
nixpkgs QEMU has only the 2D `virtio-gpu`. KWin then refuses to load animating effects
|
|
unless `KWIN_EFFECTS_FORCE_ANIMATIONS=1` is in its environment, which the VM nodes set.
|
|
- KRDP 6.8.1, Plasma's RDP server, does not start without a TLS certificate and key, although
|
|
its `--help` says it generates one; it logs the error and keeps running with nothing
|
|
listening. `xrdp` is not an option, since there is no X11 session to start.
|