Files
komorebi/docs/dev/PLATFORM.md
T
LGUG2Z 15ec3c1274 feat(kwin): read the desktop through a script in KWin
KWin has no protocol that lets another process read or set the geometry of a
window, but its scripting API has both, and a signal for every change the window
manager follows. So the KWin backend is in two parts: bridge.js, a script the
daemon loads into KWin, which reports what KWin sees and holds no window manager
logic, and a D-Bus service in the daemon, org.komorebi.Bridge, which the script
calls with every event as a JSON string.

Every decision about what an event means is made by the table in kwin::state,
which is pure and is unit-tested with the JSON the script sends: which windows
may be managed, the ids komorebi gives KWin's windows, and the Show, Destroy,
FocusChange, Minimize and Restore events of the window manager. Events reach the
window manager in the order KWin raised them: the Event interface handles its
calls inline (zbus reordered them otherwise), and one channel and one thread,
window_manager_event_listener and listen_for_events, carry them on.

Commands go to the script as the answer to a Poll call that the script always
has open and the daemon holds until it has something to send: in the spikes this
was as fast as any other channel, and it makes one call every 10 seconds when
nothing happens. Here the only command is the cursor query. Every command of the
Backend trait is refused with "the KWin backend only reads the desktop", so the
daemon follows KWin and moves nothing.

The bridge is JavaScript that KWin runs as it is, and it gets types and tests
without a JavaScript build chain. tsc checks it as strict TypeScript through
JSDoc types of every message, against kwin-api.d.ts, a declaration of the part
of KWin's scripting API it uses, in which every property is read-only and
callDBus takes one string. bridge.test.js runs it under node --test against a
fake KWin in a node:vm context. The messages of a session are JSON fixtures that
both sides' tests read: the bridge's tests check that it sends those events, and
the table's and the backend's tests read the same events and commands, so a
message cannot change on one side alone. just check-js and the flake's
komorebi-bridge-js check run both, with nodejs and typescript from nixpkgs;
there is no package.json.

The daemon now connects to KWin by default, and --fake-backend is hidden. The VM
suite vm-kwin-events starts it against a headless KWin and checks, from its
debug log, that the script loads and reports what was open, that KWin's signals
arrive as events and in order, and that stopping the daemon unloads the script.
docs/dev/PLATFORM.md starts with what komorebi needs from Plasma.

zbus 5's zvariant, zbus_names and zvariant_derive are flagged unmaintained,
since their code moved into zbus 6; deny.toml ignores the three advisories.
2026-10-27 14:46:35 -07:00

9.4 KiB

Platform

komorebi for KDE runs in a KDE Plasma session, as a client of KWin. Most of the details on this page are also written down next to the code that depends on them; this page centralizes them: which KWin it needs, how it finds it, what it creates in the session and leaves behind, every environment variable it reads, and what happens when something is missing.

Facts that change with KWin and Plasma releases are dated. Unless a fact says otherwise, it was measured with KWin 6.8.1, Plasma 6.8.1 and Qt 6.12.0 from nixpkgs d3b13ad (2026-10-24), in NixOS virtual machines under QEMU on an Apple silicon Mac (HVF).

Vocabulary

  • Session: one user's Plasma login: KWin, the Plasma shell, and a D-Bus session bus they share.
  • Session bus: the D-Bus bus of the session. komorebi and KWin talk over it.
  • KWin: the compositor and window manager of Plasma, kwin_wayland.
  • Script: a JavaScript program that KWin runs inside itself, through its scripting API. komorebi's is the bridge, bridge.js.
  • Output: KWin's name for a monitor.
  • Headless KWin: kwin_wayland --virtual, a KWin with virtual outputs and no display, which the VM tests run (vm-tests.md).

What komorebi needs

KWin 6.8 or newer

KWin 6.8 is the oldest KWin komorebi supports. The bridge reads the work area of each output for the virtual desktop that output shows (workspace.currentDesktopForScreen), which is part of the per-output virtual desktops KWin 6.8 introduced. At time of writing (2026-10-27) KWin 6.8.1 is the only version komorebi has been run against; 6.7 and older have not been tried.

Wayland

komorebi runs in a Plasma Wayland session. There is no X11 session of Plasma 6.8 to run it in. Programs that run on XWayland inside the Wayland session are windows like any other; KWin reports their X11 class (XTerm) where a Wayland client has its app id (foot, org.kde.konsole).

The session bus

komorebi finds KWin on the session bus, and nowhere else. It needs to own the name org.komorebi.Bridge there, and KWin has to own org.kde.KWin. See DBUS_SESSION_BUS_ADDRESS for how the bus is found.

Environments

The same questions, for each place the daemon can be started:

  1. How it finds KWin.
  2. What it does there.
  3. What it leaves behind.

A Plasma session

How komorebi finds KWin

Through the session bus. When the daemon is started from the session (a terminal, an autostart entry, a user unit of the session), the bus is already in its environment.

What komorebi does

It connects to the session bus as org.komorebi.Bridge, writes the bridge to $XDG_RUNTIME_DIR/komorebi/bridge.js, and asks KWin to load it under the name komorebi-bridge, replacing a script of that name left by an earlier run. The script reports the windows and outputs it finds, and from then on every window that opens, closes, takes the focus, is minimized or brought back, moves or changes size. The daemon waits up to 10 seconds for the first report and does not start without it.

The KWin backend only reads the desktop. Every command the window manager gives it (move, focus, raise, minimize, close a window, move the pointer) fails with "the KWin backend only reads the desktop", which the window manager logs.

What komorebi leaves behind

When it is stopped with SIGINT or SIGTERM it asks KWin to unload the script. The file bridge.js stays in the runtime directory, which is removed at logout. A daemon that is killed leaves the script running in KWin, reporting to nobody, until the next start replaces it or the session ends.

A headless KWin

kwin_wayland --virtual behaves like the KWin of a session for everything komorebi does: the VM tests run the daemon against one, on a private session bus of its own. It cannot draw (see Rendering), so nothing that depends on pixels can be tested against it.

No KWin

Anywhere else (a session that is not Plasma, a Linux console, a Mac), the daemon exits with an error that names what is missing:

  • "could not connect to the session bus as org.komorebi.Bridge": there is no session bus at the address the environment gives, or another komorebi owns the name.
  • "KWin is not on the session bus": the bus is there and KWin is not.
  • "KWin loaded the bridge script but it never reported in": KWin is there, and the script did not run. KWin logs a script's errors to the journal (journalctl --user -t kwin_wayland).

komorebi --fake-backend runs the window manager against an in-memory desktop instead, which works anywhere, for development and testing.

D-Bus

What komorebi owns, on the session bus:

Name Object Interface Member Called by
org.komorebi.Bridge /org/komorebi/Bridge org.komorebi.Bridge Event(s) the bridge, for every event
org.komorebi.Bridge /org/komorebi/Bridge/Poll org.komorebi.Bridge.Poll Poll(s) -> s the bridge, for commands

Both take a JSON string. Poll is held: the daemon answers it when it has commands for the bridge, or with an empty list after 10 seconds, and the bridge then calls it again.

What komorebi calls:

Name Object Interface Member When
org.kde.KWin /Scripting org.kde.kwin.Scripting unloadScript(s), loadScript(ss) -> i at start; unloadScript again at exit
org.kde.KWin /Scripting/Script<id> org.kde.kwin.Script run() at start

Files and directories

Path What Lifetime
$XDG_RUNTIME_DIR/komorebi/bridge.js the script KWin loads, with its configuration (the D-Bus names and the hold time of Poll) on its first line written at every start; the directory is removed at logout

Without XDG_RUNTIME_DIR the directory is komorebi in the local data directory instead (see XDG_DATA_HOME).

Environment variables

DBUS_SESSION_BUS_ADDRESS

The address of the session bus. If it is not set, komorebi uses $XDG_RUNTIME_DIR/bus, where systemd puts the session bus, and /run/user/<uid>/bus when XDG_RUNTIME_DIR is not set either. An address with no bus behind it is the first error under No KWin.

XDG_RUNTIME_DIR

The runtime directory of the user, normally /run/user/<uid>: komorebi writes the bridge to the komorebi directory in it.

XDG_DATA_HOME

Read only when XDG_RUNTIME_DIR is not set: the bridge is then written to $XDG_DATA_HOME/komorebi (~/.local/share/komorebi if XDG_DATA_HOME is not set either).

RUST_LOG

Which log lines the daemon prints, in the syntax of tracing-subscriber's EnvFilter (komorebi=debug, komorebi::kwin=trace). If it is not set, --log-level sets it to komorebi=<level>; --log-level defaults to info.

RUST_LIB_BACKTRACE

Whether an error carries a backtrace. komorebi sets it to 1 when it is not set.

NO_COLOR

When set to anything but the empty string, the log has no ANSI colors, which is what a log written to a file wants. The VM tests set it.

The bridge's environment

What the KWin scripting API offers a script, and what it does not, at time of writing (2026-10-27). The bridge is written around these, and kwin-api.d.ts declares the part of the API it uses, which tsc checks it against with ECMAScript 2016's library and nothing else. Node and TypeScript are needed only for those checks: in the session the bridge needs KWin alone.

  • callDBus sends a JavaScript number as a 32-bit integer, and a call whose arguments do not match the method's signature fails without a word. The bridge sends every argument as a JSON string.
  • The callback of callDBus is called on success only. A call that fails (the daemon has exited) is never answered, so the bridge re-issues Poll from a one-second QTimer when the last one is older than the hold time plus 3 seconds.
  • There is a QTimer, but no setTimeout, and no Qt global: a rectangle is assigned as a plain {x, y, width, height} object.
  • KWin activates a new window before it announces it (windowActivated comes before windowAdded). The bridge announces a window it has not seen when it is activated, so that no event names a window before the event that announces it.
  • A script's print() goes to KWin's log, which shows it only when the kwin_scripting logging category is enabled (QT_LOGGING_RULES="kwin_scripting.debug=true", as the VM tests do).

Rendering in virtual machines and over RDP

At time of writing (2026-10-27):

  • A headless KWin cannot render. Mesa's software rasterizer needs CREATE_DUMB on the primary DRM node and the virtual backend offers only the render node, so KWin reports that compositing is active while every frame fails, and screenshots are black. KWin does not start at all with no DRM device. The VM nodes give the guest a virtio-gpu device for that reason.
  • In a QEMU guest everything is drawn in software (llvmpipe on the guest's CPUs): the nixpkgs QEMU has only the 2D virtio-gpu. KWin then refuses to load animating effects unless KWIN_EFFECTS_FORCE_ANIMATIONS=1 is in its environment, which the VM nodes set.
  • KRDP 6.8.1, Plasma's RDP server, does not start without a TLS certificate and key, although its --help says it generates one; it logs the error and keeps running with nothing listening. xrdp is not an option, since there is no X11 session to start.