Correct typo on standalone (fixes #1021)

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>

CHANGELOG.md

@@ -1,15 +1,27 @@
 # CHANGELOG
 
-## 0.17.0 (2022-XX-XX)
+## 0.17.0 (2022-11-26)
 
 ### BREAKING
 
+- `noise.private_key_path` has been added and is required for the new noise protocol.
 - Log level option `log_level` was moved to a distinct `log` config section and renamed to `level` [#768](https://github.com/juanfont/headscale/pull/768)
 - Removed Alpine Linux container image [#962](https://github.com/juanfont/headscale/pull/962)
 
-### Changes
+### Important Changes
 
 - Added support for Tailscale TS2021 protocol [#738](https://github.com/juanfont/headscale/pull/738)
+- Add experimental support for [SSH ACL](https://tailscale.com/kb/1018/acls/#tailscale-ssh) (see docs for limitations) [#847](https://github.com/juanfont/headscale/pull/847)
+  - Please note that this support should be considered _partially_ implemented
+  - SSH ACLs status:
+    - Support `accept` and `check` (SSH can be enabled and used for connecting and authentication)
+    - Rejecting connections **are not supported**, meaning that if you enable SSH, then assume that _all_ `ssh` connections **will be allowed**.
+    - If you decied to try this feature, please carefully managed permissions by blocking port `22` with regular ACLs or do _not_ set `--ssh` on your clients.
+    - We are currently improving our testing of the SSH ACLs, help us get an overview by testing and giving feedback.
+  - This feature should be considered dangerous and it is disabled by default. Enable by setting `HEADSCALE_EXPERIMENTAL_FEATURE_SSH=1`.
+
+### Changes
+
 - Add ability to specify config location via env var `HEADSCALE_CONFIG` [#674](https://github.com/juanfont/headscale/issues/674)
 - Target Go 1.19 for Headscale [#778](https://github.com/juanfont/headscale/pull/778)
 - Target Tailscale v1.30.0 to build Headscale [#780](https://github.com/juanfont/headscale/pull/780)
@@ -29,14 +41,6 @@
 - Fix OIDC registration issues [#960](https://github.com/juanfont/headscale/pull/960) and [#971](https://github.com/juanfont/headscale/pull/971)
 - Add support for specifying NextDNS DNS-over-HTTPS resolver [#940](https://github.com/juanfont/headscale/pull/940)
 - Make more sslmode available for postgresql connection [#927](https://github.com/juanfont/headscale/pull/927)
-- Add experimental support for [SSH ACL](https://tailscale.com/kb/1018/acls/#tailscale-ssh) (see docs for limitations) [#847](https://github.com/juanfont/headscale/pull/847)
-  - Please note that this support should be considered _partially_ implemented
-  - SSH ACLs status:
-    - Support `accept` and `check` (SSH can be enabled and used for connecting and authentication)
-    - Rejecting connections **are not supported**, meaning that if you enable SSH, then assume that _all_ `ssh` connections **will be allowed**.
-    - If you decied to try this feature, please carefully managed permissions by blocking port `22` with regular ACLs or do _not_ set `--ssh` on your clients.
-    - We are currently improving our testing of the SSH ACLs, help us get an overview by testing and giving feedback.
-  - This feature should be considered dangerous and it is disabled by default. Enable by setting `HEADSCALE_EXPERIMENTAL_FEATURE_SSH=1`.
 
 ## 0.16.4 (2022-08-21)
 

integration/general_test.go

@@ -122,6 +122,10 @@ func TestPingAllByHostname(t *testing.T) {
 	}
 }
 
+// If subtests are parallel, then they will start before setup is run.
+// This might mean we approach setup slightly wrong, but for now, ignore
+// the linter
+// nolint:tparallel
 func TestTaildrop(t *testing.T) {
 	IntegrationSkip(t)
 	t.Parallel()

integration/scenario_test.go

@@ -21,6 +21,10 @@ func IntegrationSkip(t *testing.T) {
 	}
 }
 
+// If subtests are parallel, then they will start before setup is run.
+// This might mean we approach setup slightly wrong, but for now, ignore
+// the linter
+// nolint:tparallel
 func TestHeadscale(t *testing.T) {
 	IntegrationSkip(t)
 	t.Parallel()
@@ -70,6 +74,10 @@ func TestHeadscale(t *testing.T) {
 	}
 }
 
+// If subtests are parallel, then they will start before setup is run.
+// This might mean we approach setup slightly wrong, but for now, ignore
+// the linter
+// nolint:tparallel
 func TestCreateTailscale(t *testing.T) {
 	IntegrationSkip(t)
 	t.Parallel()
@@ -104,6 +112,10 @@ func TestCreateTailscale(t *testing.T) {
 	}
 }
 
+// If subtests are parallel, then they will start before setup is run.
+// This might mean we approach setup slightly wrong, but for now, ignore
+// the linter
+// nolint:tparallel
 func TestTailscaleNodesJoiningHeadcale(t *testing.T) {
 	IntegrationSkip(t)
 	t.Parallel()

platform_config.go

@@ -220,8 +220,8 @@ func (h *Headscale) ApplePlatformConfig(
 	}
 
 	switch platform {
-	case "macos-standlone":
-		if err := macosStandloneTemplate.Execute(&payload, platformConfig); err != nil {
+	case "macos-standalone":
+		if err := macosStandaloneTemplate.Execute(&payload, platformConfig); err != nil {
 			handleMacError(err)
 
 			return
@@ -390,7 +390,7 @@ var macosAppStoreTemplate = template.Must(template.New("macosTemplate").Parse(`
     </dict>
 `))
 
-var macosStandloneTemplate = template.Must(template.New("macosStandloneTemplate").Parse(`
+var macosStandaloneTemplate = template.Must(template.New("macosStandaloneTemplate").Parse(`
     <dict>
         <key>PayloadType</key>
         <string>io.tailscale.ipn.macsys</string>

templates/apple.html

@@ -92,7 +92,7 @@
         <code>defaults write io.tailscale.ipn.macos ControlURL {{.URL}}</code>
       </li>
       <li>
-        for standlone client:
+        for standalone client:
         <code>defaults write io.tailscale.ipn.macsys ControlURL {{.URL}}</code>
       </li>
     </ul>