* fix(colmena): expose colmenaHive for the new evaluator
nixpkgs now ships the nix-community Colmena rewrite, whose default
evaluator reads an evaluated colmenaHive flake output instead of the raw
colmena hive. Without it every colmena apply recipe failed with
"does not provide attribute colmenaHive".
Add a colmena input pinned to the same v0.5.0 as nixpkgs and expose
colmenaHive = colmena.lib.makeHive <raw hive>, with the raw hive kept as
an internal binding rather than a flake output of its own.
* chore: clean up stale colmena and aquamarine references
- point the Colmena links at nix-community/colmena after the move
- rename the security-aquamarine-metrics test to youko-metrics (it
already tested youko) and update the outputs README
- drop the commented aquamarine remote-builder example
nixpkgs-blender tracked the nixpkgs master branch, so every `just up` re-bumped it and started a full Blender/CUDA source rebuild even though Blender stayed at 5.2.2 LTS. Pin it to a fixed rev so bumps are deliberate.
The OIDN cmake override is obsolete: nixpkgs#545542 made setupCudaHook add nvcc to CUDAToolkit_ROOT, fixing the CMake 4.3+ split-root failure (nixpkgs#544701). Dropping it also stops Blender's derivation from depending on nixpkgs-stable.
Hosts used to trust the router as the only boundary (servers ran with the
firewall off; service ports were opened globally), so any LAN device could
reach every host service. Move filtering to the hosts as defence in depth
behind the router, which keeps its firewall on and uses a port mapping for
the few ports we actually need.
- base: nftables backend; deny inbound by default; trust the home LAN by
source and the tailnet by interface (restrict the tailnet with ACLs);
suppress per-service `openFirewall` global ports; allow node_exporter only
from the monitoring host. The local podman bridge, the tailnet and the pod
CIDRs are accepted only after the node_exporter drop.
- servers: stop disabling the firewall; drop redundant global port opens
(caddy 80/443, NFS 2049, Jellyfin, localsend/test ports); delete the
redundant desktop firewall module; aarch64/riscv64 import the firewall
explicitly (akane was missing it).
- k3s: Cilium pods (10.0.0.0/8, fd00::/8) may reach host services; drop the
flannel-era cni0/flannel.1 trust.
- youko: postgres listens on localhost + the LAN with pg_hba limited to the
LAN; the NFS export stays LAN-scoped; remove the unauthenticated v2ray
proxy.
- tests: `security-firewall` asserts every host runs the shared firewall, has
the LAN CIDR rule and no global ports.
Deploy RustFS in place of the retired MinIO and move the S3 consumers over.
- flake.nix / flake.lock / outputs/default.nix: add a nixpkgs-small
(nixos-unstable-small) input for the rustfs 1.0.0 package (with the web
console), instantiated as pkgs-small in genSpecialArgs alongside the other
nixpkgs instances; drop the rustfs flake input. The rest of the system stays
on the default nixpkgs.
- hosts/12kingdoms-youko/homelab-services/rustfs.nix: use nixpkgs' own
services.rustfs module, with package = pkgs-small.rustfs and
environmentFile = the agenix rustfs.env secret.
- caddy.nix: s3.writefor.fun (S3 API) and s3-console.writefor.fun (console,
redirects / to /rustfs/console/).
- secrets/nixos.nix: declare a single rustfs.env (dotenv) secret holding
RUSTFS_ACCESS_KEY / RUSTFS_SECRET_KEY, replacing the separate key files.
- infra/minio -> infra/rustfs: buckets are managed with the hashicorp/aws
provider against the RustFS S3 endpoint; IAM/ILM are applied with rc.
Keep the six node configuration intact while removing the failing user activation from the three control-plane MicroVMs. Update the regression test and current K3s configuration notes.
0.156.1 still lacks the codex-chatgpt recursion_limit attribute, so keep the postPatch that adds it. The vendored Cargo.lock is unchanged, so the cargoHash stays the same.
- run two autocutsel instances so the X PRIMARY/CLIPBOARD selections stay in
sync, making copy/paste work in the session and through VNC
- drop --disable-blink-features=AutomationControlled: nothing drives the
browser over CDP, so navigator.webdriver is already false and the flag only
marked the setup as automated
- document why the driver stays on real X11/AT-SPI input and is never granted
a CDP attach, and note the SSH-tunnel path for manual VNC access
- extend the computer-use eval test
Add worker-1 (4 vCPU / 16 GiB) on shoryu, and worker-2 (4 vCPU / 16 GiB) plus worker-3 (2 vCPU / 8 GiB) on shushou, as microVMs. They come with a genK3sAgentModule and the per-host/output/home-manager wiring, and are labelled node-role.kubernetes.io/worker=true. The masters keep their control-plane:NoSchedule taint, so workloads land on the workers.
Give the idols-ruby and idols-kana VMs a headless computer-use
environment: Xvfb plus i3, driven by cua-driver (and computer-use-linux
as a fallback). Includes the system module (AT-SPI, fonts, Mesa, Clash
Verge proxy, proxy-region timezone), the home i3 module (Xvfb/i3/x11vnc
services, browser flags), host wiring and an eval test.
The k3s-test workers never ran (they were stuck waiting for volume
binding) and will be re-added as microVMs, so remove their KubeVirt
configs and everything that only existed for KubeVirt guests:
- hosts/k8s/k3s-test-1-worker-{1,2,3} and their outputs
- lib/genKubeVirtGuestModule.nix and lib/genK3sAgentModule.nix (the
latter was only used by the workers)
- the KubeVirt image upload recipes (upload-vm, upload-idols,
upload-k3s-test) and the kubevirt image package in the idols outputs
- refresh the docs; keep only accurate historical mentions (e.g. the
restic backup path must stay as it is)
Drop the now-meaningless kubevirt- prefix and move the hosts out of
hosts/k8s/, following the existing 12kingdoms-shoukei layout: the
directory and output carry the theme prefix while the configuration,
hostname and colmena target are the bare name (shoryu, shushou, youko).
- hosts/k8s/kubevirt-* -> hosts/12kingdoms-*; the shared disko config
becomes host-disko-fs.nix; the now-different relative imports are fixed
- outputs, vars/networking.nix keys, the Justfile recipes/tags, the eval
tests and the docs follow
- colmena reaches these hosts by IP (a new targetHost override), since
their DNS name changes with the hostname and is not resolvable until
the router learns it
The file is not KubeVirt-specific: it is the hardware configuration for
any QEMU guest that boots from a disk (KubeVirt or libvirt). All it does
is pull in qemu-guest.nix and set fileSystems."/" from the disk labeled
nixos.
Replace the KubeVirt/etcd members with microVMs on the three physical
hosts, keeping the existing cluster: the guests inherit their host key
and k3s state from the old disks, so etcd recovers in place instead of
bootstrapping a new cluster.
- convert hosts/k8s/k3s-test-1-master-{1,2,3} to genMicrovmGuestModule
and switch their outputs to the microvm module (keep home-modules)
- declare the vms on shoryu/youko/shushou and bridge their taps to br0
- each guest config is self-contained (its secret group and the
nixpkgs.config override live in the guest, not the host module)
- guest specialArgs carry agenix/mysecrets so secrets/nixos.nix works
Aquamarine's services now run directly on kubevirt-youko, so the guest
definition is no longer needed:
- move its service modules to hosts/k8s/kubevirt-youko/aquamarine/ and
drop the explicit import list, leaving aquamarine-services.nix with
just its IP and secret groups
- delete the guest base, journald override, output entry and home config
- repoint the eval tests that read the guest's config to kubevirt-youko
- drop the now-dead 'aqua' colmena recipe and its image upload
The aqua KubeVirt VM itself is deleted separately; the name is kept in
the docs for a possible later test microvm/qemu-vm on idols-ai.
* feat(k3s-test-1): add three worker nodes and taint the control plane
- hosts/k8s/k3s-test-1-worker-{1,2,3} (k3s agents) + flake outputs
- vars/networking: .117/.118/.119 (the .111-.113 range is still held by the
never-deployed k3s-prod-1 workers)
- k3s-test-1-master-{1,2,3}: nodeTaints=node-role.kubernetes.io/control-plane:NoSchedule
- Justfile: upload the worker images too
* chore(k3s-test-1): move the workers to .111-.113
The k3s-prod-1 entries that held those addresses are gone (nix-config#284).
It was never bootstrapped (no flux deploy key, VMs commented out since
2024-10) and only carried a stale duplicate of the test cluster's config.
- hosts/k8s/k3s-prod-1-{master,worker}-{1,2,3} + flake outputs + the home module
- the k3s-prod-1-token agenix entry (the .age file lives in the private secrets repo)
- the k3s-prod-1-* IPs, the offlineHosts entries, the Justfile recipes and the docs
Noctalia v5 is the native C++/Wayland rewrite; the Quickshell-based v4 line (pkgs.noctalia-shell) is EOL and its JSON config is not migrated upstream.
- use the upstream home-manager programs.noctalia module (present at our pinned HM revision) instead of the hand-rolled package + symlink module: it installs pkgs.noctalia, validates config.toml at build time via checkConfig, and supports customPalettes; drop the v4 Qt/Qt6ct session setup
- replace the v4 settings.json/plugins.json with a minimal shared config.toml (font, Catppuccin shell palette, templates off, screenshot annotation, accessibility/bar scale, night light, wallpaper, location/weather); host-specific bits live in per-host files (shoukei's eDP-1 backlight in noctalia/host-shoukei.toml), which merge after config.toml. Application theming stays with catppuccin/nix
- treat config.toml as the single source of truth: do NOT persist ~/.local/state/noctalia and set setup_wizard_enabled = false, so UI tweaks are promoted back into the repo instead of accumulating in app-owned state
- port niri keybinds to 'noctalia msg ...', update spawn-at-startup and the backdrop layer namespace, fix the broken 'octalia-shell' media-previous bind, and replace the grim/slurp/satty screenshot stack with Noctalia's native region/fullscreen/annotate commands (drop the unused packages)
- drop the now-redundant swaybg and swaylock (Noctalia owns the wallpaper and lock screen, the latter authenticating against the PAM 'login' service) and its PAM entry; keep wlogout as an emergency fallback
- update hypridle's lock commands and the matching eval test
- refresh the noctalia docs
checks.<system>.eval-tests returned a boolean, so nix flake check failed with "not a derivation". Wrap the evalTests result in a runCommand so flake check actually evaluates it.
* feat(btrbk): make snapshots explicit and guarded
Replace the always-on, hardcoded module with modules.btrbk options (enable/volume/subvolume/snapshotDir/target/onCalendar), and assert the btrfs top-level subvolume is mounted so a missing mount fails evaluation instead of silently failing at runtime.
Store snapshots in the @snapshots subvolume (snapshot_dir=@snapshots) rather than next to the live subvolume, make the off-host target explicit and off by default, and document that local snapshots are not off-host backups.
Enable the feature explicitly on idols-ai, shoukei and the three kubevirt hosts; qemu-guest now disables it through the option. Add eval tests for shoukei and ai.
* feat(monitoring): alert on btrbk snapshot failure
Add HostBtrbkSnapshotFailed on node_systemd_unit_state for btrbk-btrbk.service, so a broken snapshot schedule alerts instead of only surfacing in the journal.
Replace the static hypridle.conf with services.hypridle.settings and add required timeout options so each host tunes its own values:
- idols-ai (PC): 15 min keyboard, 20 min screen-off, 30 min lock.
- 12kingdoms-shoukei (laptop): 3 / 6 / 20 min (previous values).
The options have no defaults because the right values depend on the machine. Update the home-manager eval test to inspect the settings option instead of the old config file text.
- render Niri on the Intel iGPU while retaining NVIDIA-connected physical outputs
- encode Sunshine streams with Intel VAAPI and wait for a Niri output before startup
- load VKMS persistently for headless sessions and configure `Virtual-1` at 2560x1600@60
- let Moonlight request the stream bitrate instead of enforcing a 20 Mbps host cap
- remove unsupported Dynamic Boost and global NVIDIA session overrides
- grant Sunshine access to virtual input devices
- add a Nushell recovery helper that starts a temporary greetd/Niri session from SSH
- identify and safely replace normal, standalone, or previous transient Niri sessions
- launch the transient service in the background and verify greetd, Niri, and Sunshine before returning
- ignore local `.worktrees` directories and keep eval regression coverage focused on structural behavior
* security: make firewall secure-by-default, disable explicitly on servers
Flip the base firewall default to ON so new hosts are protected by default. Servers keep the firewall off (trusted internal LAN, WAN protected at the router) via explicit overrides in modules/nixos/server/{server,server-aarch64}.nix. Behavior-preserving for all 18 current hosts; adds a security-firewall eval test guarding the per-host state.
* test: fix security-firewall eval test to scalar per-host values
* security: enable AppArmor (complain) on all Linux hosts
* security: bind aquamarine metrics exporters to loopback
* security: restrict k3s kubeconfig file mode to 600
* security: disable SSH X11 forwarding on servers, keep on desktops
* security: add conservative systemd hardening to aquamarine services
* docs(apparmor): correct FHS-alias comment (nixpkgs has no broad FHS layer)
nixpkgs only creates /run/current-system, /usr/bin/env and /bin/sh; it does not
provide a broad FHS->store alias tree, so FHS-oriented abstractions are incomplete
on NixOS. They are safe only because the profiles run in complain mode.
* fix(aquamarine): scrape same-host exporters over loopback
The v2ray/postgres/sftpgo exporters were bound to 127.0.0.1 but VictoriaMetrics
scraped them via the host's routable IP, so those scrapes refused connections.
Point the three same-host scrape targets at 127.0.0.1 (VM runs on the same host).
node-exporter keeps the host IP since it binds 0.0.0.0.
* Revert "security: add conservative systemd hardening to aquamarine services"
This reverts commit f9cf99dadb.
Setting nix.settings.sandbox-paths replaces Nix compiled sandbox defaults. Keeping only /dev/net made local builds lose the sandbox shell that normally provides /bin/sh, which broke upstream scripts with /bin/sh shebangs in packages such as X11-fonts and openldap.
Use extra-sandbox-paths for /dev/net instead. This keeps Nix daemon defaults intact, including the configured sandbox shell, while still allowing builds that need /dev/net.
Add eval coverage for both Linux output sets so future changes keep /dev/net in extra-sandbox-paths and do not reintroduce an explicit sandbox-paths override.