The file is not KubeVirt-specific: it is the hardware configuration for
any QEMU guest that boots from a disk (KubeVirt or libvirt). All it does
is pull in qemu-guest.nix and set fileSystems."/" from the disk labeled
nixos.
Replace the KubeVirt/etcd members with microVMs on the three physical
hosts, keeping the existing cluster: the guests inherit their host key
and k3s state from the old disks, so etcd recovers in place instead of
bootstrapping a new cluster.
- convert hosts/k8s/k3s-test-1-master-{1,2,3} to genMicrovmGuestModule
and switch their outputs to the microvm module (keep home-modules)
- declare the vms on shoryu/youko/shushou and bridge their taps to br0
- each guest config is self-contained (its secret group and the
nixpkgs.config override live in the guest, not the host module)
- guest specialArgs carry agenix/mysecrets so secrets/nixos.nix works
Aquamarine's services now run directly on kubevirt-youko, so the guest
definition is no longer needed:
- move its service modules to hosts/k8s/kubevirt-youko/aquamarine/ and
drop the explicit import list, leaving aquamarine-services.nix with
just its IP and secret groups
- delete the guest base, journald override, output entry and home config
- repoint the eval tests that read the guest's config to kubevirt-youko
- drop the now-dead 'aqua' colmena recipe and its image upload
The aqua KubeVirt VM itself is deleted separately; the name is kept in
the docs for a possible later test microvm/qemu-vm on idols-ai.
* feat(k3s-test-1): add three worker nodes and taint the control plane
- hosts/k8s/k3s-test-1-worker-{1,2,3} (k3s agents) + flake outputs
- vars/networking: .117/.118/.119 (the .111-.113 range is still held by the
never-deployed k3s-prod-1 workers)
- k3s-test-1-master-{1,2,3}: nodeTaints=node-role.kubernetes.io/control-plane:NoSchedule
- Justfile: upload the worker images too
* chore(k3s-test-1): move the workers to .111-.113
The k3s-prod-1 entries that held those addresses are gone (nix-config#284).
It was never bootstrapped (no flux deploy key, VMs commented out since
2024-10) and only carried a stale duplicate of the test cluster's config.
- hosts/k8s/k3s-prod-1-{master,worker}-{1,2,3} + flake outputs + the home module
- the k3s-prod-1-token agenix entry (the .age file lives in the private secrets repo)
- the k3s-prod-1-* IPs, the offlineHosts entries, the Justfile recipes and the docs
Noctalia v5 is the native C++/Wayland rewrite; the Quickshell-based v4 line (pkgs.noctalia-shell) is EOL and its JSON config is not migrated upstream.
- use the upstream home-manager programs.noctalia module (present at our pinned HM revision) instead of the hand-rolled package + symlink module: it installs pkgs.noctalia, validates config.toml at build time via checkConfig, and supports customPalettes; drop the v4 Qt/Qt6ct session setup
- replace the v4 settings.json/plugins.json with a minimal shared config.toml (font, Catppuccin shell palette, templates off, screenshot annotation, accessibility/bar scale, night light, wallpaper, location/weather); host-specific bits live in per-host files (shoukei's eDP-1 backlight in noctalia/host-shoukei.toml), which merge after config.toml. Application theming stays with catppuccin/nix
- treat config.toml as the single source of truth: do NOT persist ~/.local/state/noctalia and set setup_wizard_enabled = false, so UI tweaks are promoted back into the repo instead of accumulating in app-owned state
- port niri keybinds to 'noctalia msg ...', update spawn-at-startup and the backdrop layer namespace, fix the broken 'octalia-shell' media-previous bind, and replace the grim/slurp/satty screenshot stack with Noctalia's native region/fullscreen/annotate commands (drop the unused packages)
- drop the now-redundant swaybg and swaylock (Noctalia owns the wallpaper and lock screen, the latter authenticating against the PAM 'login' service) and its PAM entry; keep wlogout as an emergency fallback
- update hypridle's lock commands and the matching eval test
- refresh the noctalia docs
checks.<system>.eval-tests returned a boolean, so nix flake check failed with "not a derivation". Wrap the evalTests result in a runCommand so flake check actually evaluates it.
* feat(btrbk): make snapshots explicit and guarded
Replace the always-on, hardcoded module with modules.btrbk options (enable/volume/subvolume/snapshotDir/target/onCalendar), and assert the btrfs top-level subvolume is mounted so a missing mount fails evaluation instead of silently failing at runtime.
Store snapshots in the @snapshots subvolume (snapshot_dir=@snapshots) rather than next to the live subvolume, make the off-host target explicit and off by default, and document that local snapshots are not off-host backups.
Enable the feature explicitly on idols-ai, shoukei and the three kubevirt hosts; qemu-guest now disables it through the option. Add eval tests for shoukei and ai.
* feat(monitoring): alert on btrbk snapshot failure
Add HostBtrbkSnapshotFailed on node_systemd_unit_state for btrbk-btrbk.service, so a broken snapshot schedule alerts instead of only surfacing in the journal.
Replace the static hypridle.conf with services.hypridle.settings and add required timeout options so each host tunes its own values:
- idols-ai (PC): 15 min keyboard, 20 min screen-off, 30 min lock.
- 12kingdoms-shoukei (laptop): 3 / 6 / 20 min (previous values).
The options have no defaults because the right values depend on the machine. Update the home-manager eval test to inspect the settings option instead of the old config file text.
- render Niri on the Intel iGPU while retaining NVIDIA-connected physical outputs
- encode Sunshine streams with Intel VAAPI and wait for a Niri output before startup
- load VKMS persistently for headless sessions and configure `Virtual-1` at 2560x1600@60
- let Moonlight request the stream bitrate instead of enforcing a 20 Mbps host cap
- remove unsupported Dynamic Boost and global NVIDIA session overrides
- grant Sunshine access to virtual input devices
- add a Nushell recovery helper that starts a temporary greetd/Niri session from SSH
- identify and safely replace normal, standalone, or previous transient Niri sessions
- launch the transient service in the background and verify greetd, Niri, and Sunshine before returning
- ignore local `.worktrees` directories and keep eval regression coverage focused on structural behavior
* security: make firewall secure-by-default, disable explicitly on servers
Flip the base firewall default to ON so new hosts are protected by default. Servers keep the firewall off (trusted internal LAN, WAN protected at the router) via explicit overrides in modules/nixos/server/{server,server-aarch64}.nix. Behavior-preserving for all 18 current hosts; adds a security-firewall eval test guarding the per-host state.
* test: fix security-firewall eval test to scalar per-host values
* security: enable AppArmor (complain) on all Linux hosts
* security: bind aquamarine metrics exporters to loopback
* security: restrict k3s kubeconfig file mode to 600
* security: disable SSH X11 forwarding on servers, keep on desktops
* security: add conservative systemd hardening to aquamarine services
* docs(apparmor): correct FHS-alias comment (nixpkgs has no broad FHS layer)
nixpkgs only creates /run/current-system, /usr/bin/env and /bin/sh; it does not
provide a broad FHS->store alias tree, so FHS-oriented abstractions are incomplete
on NixOS. They are safe only because the profiles run in complain mode.
* fix(aquamarine): scrape same-host exporters over loopback
The v2ray/postgres/sftpgo exporters were bound to 127.0.0.1 but VictoriaMetrics
scraped them via the host's routable IP, so those scrapes refused connections.
Point the three same-host scrape targets at 127.0.0.1 (VM runs on the same host).
node-exporter keeps the host IP since it binds 0.0.0.0.
* Revert "security: add conservative systemd hardening to aquamarine services"
This reverts commit f9cf99dadb.
Setting nix.settings.sandbox-paths replaces Nix compiled sandbox defaults. Keeping only /dev/net made local builds lose the sandbox shell that normally provides /bin/sh, which broke upstream scripts with /bin/sh shebangs in packages such as X11-fonts and openldap.
Use extra-sandbox-paths for /dev/net instead. This keeps Nix daemon defaults intact, including the configured sandbox shell, while still allowing builds that need /dev/net.
Add eval coverage for both Linux output sets so future changes keep /dev/net in extra-sandbox-paths and do not reintroduce an explicit sandbox-paths override.
* feat: comment out nixpkgs-unstable, we use unstable by default
Signed-off-by: Ryan Yin <xiaoyin_c@qq.com>
* fix: typo...
---------
Signed-off-by: Ryan Yin <xiaoyin_c@qq.com>
* feat: replace impermanence with preservation
* fix: This module cannot be used with scripted initrd.
* fix: permission for /var/lib/private
* chore: boot.initrd.systemd.enable
* docs: boot.initrd.luks.devices.<name>.fallbackToPassword is implied by systemd stage 1
* fix: typo
Ryan Yin
ryan4yin | 二花