mirror of
https://github.com/ryan4yin/nix-config.git
synced 2026-11-13 12:13:36 +01:00
Ryan Yin
eaa53004e5
hardware.amdgpu.opencl.enable also adds clr, whose OpenCL 2.2 libOpenCL.so.1 lands in /run/opengl-driver/lib, first in OpenVINO's RUNPATH, and shadows the ocl-icd loader the GPU plugin links. With clr.icd alone the plugin finds ocl-icd, so the wrapper and WA-038 go. Assisted-by: Claude Code (claude-opus-5-5)
83 lines
3.9 KiB
Nix
83 lines
3.9 KiB
Nix
{
|
|
pkgs,
|
|
myvars,
|
|
...
|
|
}:
|
|
{
|
|
# ===============================================================================================
|
|
# 2x AMD Radeon AI PRO R9700 (RDNA4, gfx1201) for local inference
|
|
# https://wiki.nixos.org/wiki/AMD_GPU
|
|
#
|
|
# The second full-length x16 slot is chipset-attached: its root port is Gen4 x4
|
|
# while the card side reports x16, so the second card reads weights at ~7.1 GB/s
|
|
# against 46.3 GB/s. Split models by layer, not tensor parallel — see ./README.md
|
|
# and ./ROCM.md (ROCm support, measured links, RCCL TP=2 deadlock).
|
|
# ===============================================================================================
|
|
|
|
boot.kernelModules = [ "amdgpu" ];
|
|
|
|
boot.kernelParams = [
|
|
# ROCm: multi-GPU systems may hang in compute applications unless the IOMMU
|
|
# runs in passthrough mode.
|
|
# https://rocm.docs.amd.com/projects/install-on-linux/en/latest/reference/system-requirements.html
|
|
"iommu=pt"
|
|
|
|
# This board's DSDT advertises ATPX power control (`\_SB.PC00.GFX0.ATPX`) but
|
|
# never defines the `PEG0.PEGP._OFF`/`_ON` symbols its body calls, so the first
|
|
# idle resume of the headless card leaves it in `runtime_status = error` until
|
|
# reboot; amdgpu discards the ACPI error, so the failure is silent. This is the
|
|
# only setting that avoids it, and it needs the iGPU kept for the console
|
|
# fallback to trigger at all. Root cause, kernel-source trail and the field
|
|
# comparison: ./ROCM.md (WA-032).
|
|
"amdgpu.runpm=0"
|
|
|
|
# The driver's own default is -1, "auto, disabled except SRIOV", so on bare
|
|
# metal a hung card stays hung until the next reboot. Nobody is here to
|
|
# power-cycle an unattended inference host, so switch the recovery path on.
|
|
"amdgpu.gpu_recovery=1"
|
|
];
|
|
|
|
# ROCm 10.1 is available: https://rocm.docs.amd.com/en/latest/.
|
|
# nixpkgs still ships 7.2.x while the upgrade awaits split reviews, LLVM/OpenMP
|
|
# fixes and compatibility work: https://github.com/NixOS/nixpkgs/pull/573885.
|
|
# Inference containers carry their own ROCm userspace.
|
|
# Not hardware.amdgpu.opencl.enable: its clr adds an OpenCL 2.2 libOpenCL.so.1 that shadows ocl-icd.
|
|
hardware.graphics.extraPackages = [ pkgs.rocmPackages.clr.icd ];
|
|
|
|
# /dev/kfd is world-writable under nixpkgs' default udev rule, but
|
|
# /dev/dri/renderD* is `render` 0660 and this headless host has no logged-in
|
|
# seat to hand out ACLs, so the inference user needs the group.
|
|
users.users.${myvars.username}.extraGroups = [ "render" ];
|
|
|
|
environment.systemPackages = [
|
|
pkgs.rocmPackages.rocm-smi
|
|
pkgs.rocmPackages.rocminfo
|
|
pkgs.nvtopPackages.full
|
|
];
|
|
|
|
# Cap both cards at 250 W to quiet their fans; the smaller power draw is a side effect. Measured on
|
|
# this host (27B, second card), that costs ~4% of prefill and decode throughput against the 300 W
|
|
# default. amdgpu exposes the cap in microwatts and accepts anything inside [power1_cap_min,
|
|
# power1_cap_max] — 210-300 W on these cards. The set path (amdgpu_dpm_set_power_limit) has no
|
|
# overdrive gate, so the ppfeaturemask default stands.
|
|
services.udev.extraRules = ''
|
|
ACTION=="add", SUBSYSTEM=="hwmon", ATTR{name}=="amdgpu", ATTR{power1_cap}="250000000"
|
|
'';
|
|
|
|
# GPU panel in btop, and utilization/VRAM in node_exporter for the shared
|
|
# VictoriaMetrics scrape — the same shape as the Radeon iGPU hosts.
|
|
# perfmon: CAP_PERFMON is what btop needs for the i915 iGPU.
|
|
modules.btop = {
|
|
package = pkgs.btop-rocm;
|
|
perfmon = true;
|
|
};
|
|
# `enabledCollectors` is a list option, so this merges with the base module's
|
|
# `[ "systemd" "logind" ]` instead of replacing it: only name the collector
|
|
# this host adds. Repeating the base entries passes `--collector.systemd`
|
|
# twice, which node_exporter rejects, and the unit restart-loops.
|
|
#
|
|
# The CPU/RAPL collector lives in ./hardware-intel-cpu.nix; this file only adds
|
|
# the AMD GPU `drm` collector.
|
|
services.prometheus.exporters.node.enabledCollectors = [ "drm" ];
|
|
}
|