refactor: Use haumea for filesystem-based module system for flake outputs

refactor: Use hyphen(`-`) for variable names & folder names(except Python), replace all unserscore(`_`) with hyphen(`-`).
2026-05-21 05:56:51 +02:00 · 2024-03-09 01:32:58 +08:00
parent d7738efed2
commit b382999a70
167 changed files with 1570 additions and 955 deletions
@@ -0,0 +1,83 @@
+{
+  nixos-licheepi4a,
+  myvars,
+  ...
+}:
+#############################################################
+#
+#  Nozomi - NixOS configuration for Lichee Pi 4A
+#
+#############################################################
+let
+  hostName = "nozomi"; # Define your hostname.
+  hostAddress = myvars.networking.hostAddress.${hostName};
+in {
+  imports = [
+    # import the licheepi4a module, which contains the configuration for bootloader/kernel/firmware
+    (nixos-licheepi4a + "/modules/licheepi4a.nix")
+    # import the sd-image module, which contains the fileSystems & kernel parameters for booting from sd card.
+    (nixos-licheepi4a + "/modules/sd-image/sd-image-lp4a.nix")
+  ];
+
+  # Set static IP address / gateway / DNS servers.
+  networking = {
+    inherit hostName;
+    inherit (myvars.networking) defaultGateway nameservers;
+
+    wireless = {
+      # https://wiki.archlinux.org/title/wpa_supplicant
+      enable = true;
+      # The path to the file containing the WPA passphrase.
+      # secrets are not supported well on riscv64, I nned to create this file manually.
+      # Format: "PSK_WEMEET_PRIVATE_WIFI=your_password"
+      environmentFile = "/etc/wpa_supplicant.env";
+      # The network definitions to automatically connect to when wpa_supplicant is running.
+      networks = {
+        # read WPAPSK from environmentFile
+        "shadow_light_ryan".psk = "@PSK_WEMEET_PRIVATE_WIFI@";
+      };
+    };
+
+    # Failed to enable firewall due to the following error:
+    #   firewall-start[2300]: iptables: Failed to initialize nft: Protocol not supported
+    firewall.enable = false;
+
+    # Configure network proxy if necessary
+    # proxy.default = "http://user:password@proxy:port/";
+    # proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+    # LPI4A's wireless interface
+    interfaces.wlan0 = {
+      useDHCP = false;
+      ipv4.addresses = [hostAddress];
+    };
+    # LPI4A's first ethernet interface
+    # interfaces.end0 = {
+    #   useDHCP = false;
+    #   ipv4.addresses = [
+    #     {
+    #       address = "192.168.5.104";
+    #       prefixLength = 24;
+    #     }
+    #   ];
+    # };
+    # LPI4A's second ethernet interface
+    # interfaces.end1 = {
+    #   useDHCP = false;
+    #   ipv4.addresses = [
+    #     {
+    #       address = "192.168.xx.xx";
+    #       prefixLength = 24;
+    #     }
+    #   ];
+    # };
+  };
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "23.05"; # Did you read the comment?
+}