Update model docs for device components

docs/models/dcim/frontport.md

@@ -1,3 +1,40 @@
-## Front Ports
+# Front Ports
 
-Front ports are pass-through ports used to represent physical cable connections that comprise part of a longer path. For example, the ports on the front face of a UTP patch panel would be modeled in NetBox as front ports. Each port is assigned a physical type, and must be mapped to a specific rear port on the same device. A single rear port may be mapped to multiple front ports, using numeric positions to annotate the specific alignment of each.
+Front ports are pass-through ports which represent physical cable connections that comprise part of a longer path. For example, the ports on the front face of a UTP patch panel would be modeled in NetBox as front ports. Each port is assigned a physical type, and must be mapped to a specific [rear port](./rearport.md) on the same device. A single rear port may be mapped to multiple front ports, using numeric positions to annotate the specific alignment of each.
+
+## Fields
+
+### Device
+
+The device to which this port belongs.
+
+### Module
+
+The installed module within the assigned device to which this port belongs (optional).
+
+### Name
+
+The port's name. Must be unique to the parent device.
+
+### Label
+
+An alternative physical label identifying the port.
+
+### Type
+
+The port's termination type.
+
+### Rear Ports
+
+The rear port and position to which this front port maps.
+
+!!! tip
+    When creating multiple front ports using a patterned name (e.g. `Port [1-12]`), you may select the equivalent number of rear port-position mappings from the list.
+
+### Color
+
+The port's color (optional).
+
+### Mark Connected
+
+If selected, this component will be treated as if a cable has been connected.