komorebi/docs/usage/configuration.md

Configuration

komorebi is configured by one file, komorebi.json. Many of its settings can also be changed while the daemon runs, with a komorebic command, but the file is where the settings that should be there every time komorebi starts belong: the workspaces of each monitor and their layouts, the padding around the tiles, the rules that decide which windows are tiled.

Example configurations has a file to start from.

Where the file is

The daemon reads, in this order:

1. the file --config names: komorebi --config ~/mine.json, or komorebic start --config ~/mine.json. Environment variables in the path, such as $HOME, are replaced;
2. komorebi.json in the config home, which is $KOMOREBI_CONFIG_HOME when that is set (it has to be a directory) and ~/.config/komorebi when it is not.

With neither, komorebi runs on its defaults, which are what every setting below says it is when the file leaves it out. komorebic configuration (or komorebic config) prints the path of the file in the config home, when there is one.

On NixOS, the module's configFile gives the daemon a file the same way --config does.

Changing the file

The daemon watches the file it read. When the file changes, about two seconds later it reads it again and applies it to the windows it has: it sets the settings, gives each monitor the workspaces the file lists for it, and tiles every monitor again. The windows stay in the workspaces they are in. An editor that writes the file in place and one that writes a new file and renames it over the old one are both followed.

A file that cannot be read, or that has a value of the wrong kind, changes nothing: the daemon logs the error and keeps what it has. The file is written as JSON that may have comments and trailing commas.

Reading the file again sets every setting of the daemon from it, and a key the file leaves out is the default of the setting: a resize-delta given with a command is gone when the file changes. Three things stay as they were when the file leaves them out: default_workspace_padding, default_container_padding and display_index_preferences. The rules add up, as Rules says. A workspace the file lists gets its name, padding, offsets and rules from its entry, and its layout when the entry names one; a workspace the file does not list is left as it is.

komorebic generate-static-config prints the settings the daemon has now as a komorebi.json: a way to start a file from a setup arrived at with commands. The rules (ignore_rules, manage_rules and floating_applications) are not in what it prints.

One file for every platform

komorebi for Windows and komorebi for Mac have their own keys, and one komorebi.json can serve all of them. A key that komorebi for KDE does not read is ignored, and so is a key it does not know: loading never fails because of one. Keys that mean nothing on Plasma, because they are about how another platform draws or hides windows, are accepted: titleless_applications, tabbed_applications, window_hiding_position of a monitor, and the keys that only Windows has (window_hiding_behaviour, border_style, stackbar, and the others of the Windows file).

The keys

Settings of the daemon

Key	Default	What it does
resize_delta	50	How many pixels resize-edge and resize-axis resize by
mouse_follows_focus	true	Whether the pointer goes to the window that is given the focus
cross_monitor_move_behaviour	Swap	What move does at the edge of a monitor: Swap, Insert or NoOp
cross_boundary_behaviour	Monitor	Where focus and move go at the edge of a monitor: to the next Monitor or the next Workspace
unmanaged_window_operation_behaviour	Op	Whether a command is carried out while the focused window is not tiled: Op or NoOp
window_container_behaviour	Create	What a window that opens gets: a tile of its own (Create) or a place in the focused stack (Append)
float_override	false	Whether every window that opens floats
float_override_placement	None	What is done to a window the override floats: None, Center or CenterAndResize
floating_layer_behaviour	Tile	What a window that opens while a workspace is on its floating layer gets: Tile or Float
floating_layer_placement	Center	What is done to a window that floating_layer_behaviour floats
monocle_focus_behaviour	NoOp	What focus does while a container is in monocle: NoOp or Cycle
toggle_float_placement	CenterAndResize	What toggle-float does to the window it floats: None, Center or CenterAndResize
float_rule_placement	None	The same, for a window that opens and matches floating_applications
floating_window_aspect_ratio	Standard	The aspect ratio CenterAndResize gives the window: Standard (4:3), Widescreen (16:9), Ultrawide (21:9) or [width, height]

Padding and offsets

Key	Default	What it does
default_workspace_padding	5	The gap, in pixels, between the edge of the work area and the tiles
default_container_padding	5	The gap around each tile
global_work_area_offset	none	The part of every monitor's work area that tiles stay out of: left, top, right and bottom. left and top move the edge in; right and bottom make the area narrower and shorter by that much

Padding and work area offsets explains how the three nest. A monitor (container_padding, workspace_padding, work_area_offset) and a workspace (the same three) can have values of their own, which come before the default.

Rules

Key	What it does
ignore_rules	Windows komorebi leaves alone (float_rules is the same key under its old name)
manage_rules	Windows komorebi tiles whatever the ignore rules say
floating_applications	Windows that open floating

Each is a list of rules, which Rules explains. A rule is an object with kind (Exe, Class, Title or Path), id and matching_strategy (Equals, StartsWith, EndsWith, Contains, Regex, or one of the four that negate them: DoesNotEqual, DoesNotStartWith, DoesNotEndWith and DoesNotContain), or a list of such objects, all of which have to match. Rules in the file add to the ones the daemon has: a rule that is taken out of the file stays until the daemon restarts.

Monitors and workspaces

monitors is a list with one entry for each monitor, each with its workspaces. The first entry is for the first monitor, the second for the second, and so on. A monitor that has no entry keeps what it has.

display_index_preferences puts an entry on a monitor by what the monitor is called instead of by its place: { "0": "DP-1", "1": "HDMI-A-1" } says that the entry at index 0 is for the monitor DP-1. komorebic monitor-information shows the names. A monitor that has no preference takes the first entry nobody's preference names and that no other monitor has taken.

A monitor entry can also have a floating_layer_behaviour, which is the one its workspaces take unless they have their own, and which comes before the one for every monitor.

A monitor takes as many workspaces as its entry lists, and KWin gets a virtual desktop for each, named for it. A workspace has these keys:

Key	Default	What it does
name	required	The name focus-named-workspace and the other named commands find it by
layout	none	The layout: BSP, Columns, Rows, VerticalStack, RightMainVerticalStack, HorizontalStack, UltrawideVerticalStack, Grid or Scrolling
tile	see below	Whether the workspace tiles its windows
layout_flip	none	The axis the layout is mirrored on: Horizontal, Vertical or HorizontalAndVertical
layout_options	none	Options of the layout, such as column_ratios and scrolling
layout_rules	none	{ "3": "Columns" }: the layout the workspace has once it has 3 containers or more
layout_options_rules	none	The same, for the layout options
container_padding, workspace_padding	the default	The padding of this workspace
work_area_offset	none	The offset of this workspace
work_area_offset_rules	none	{ "2": { "left": 100, "top": 0, "right": 200, "bottom": 0 } }: the offset the workspace has once it has 2 containers or more
apply_window_based_work_area_offset	true	Whether the workspace takes its monitor's window-based offset
window_container_behaviour	the default	What a window that opens on this workspace gets: Create or Append
window_container_behaviour_rules	none	{ "2": "Append" }: the behavior the workspace has once it has 2 containers or more
float_override	the default	Whether every window that opens on this workspace floats
floating_layer_behaviour	the default	What a window that opens while this workspace is on its floating layer gets: Tile or Float

A workspace that names no layout and does not say "tile": true does not tile: its windows stay where they open. A workspace with layout_rules tiles. Otherwise a workspace tiles.

The highest of the rules that the number of containers reaches wins. A layout rule changes the layout of the workspace and leaves it there when the number falls below the threshold again, so a rule at 1 is how to say what the layout is when there is one window; the offset and the layout options of a rule are the ones the workspace has while it has that many containers.

The window container behavior rules are the exception: while the workspace has fewer containers than the lowest threshold it has no behavior of its own and takes the one for every workspace, and a workspace that has rules takes its behavior from them alone, so toggle-workspace-window-container-behaviour does not outlast the next time it is tiled.

Layout options for every workspace

layout_defaults gives the layout options and the layout options rules of a layout to every workspace that has that layout and sets neither layout_options nor layout_options_rules:

{
  "layout_defaults": {
    "Columns": { "layout_options": { "column_ratios": [0.6] } },
    "Scrolling": { "layout_options": { "scrolling": { "columns": 2 } } }
  }
}

A workspace that sets either of its own has none of the defaults of its layout, not even for the setting it leaves out.

Layout rules from the command line

The layout rules of a workspace can be added and taken away while the daemon runs:

komorebic workspace-layout-rule 0 1 3 columns
komorebic named-workspace-layout-rule mail 2 rows
komorebic clear-workspace-layout-rules 0 1
komorebic clear-named-workspace-layout-rules mail

workspace-layout-rule takes the index of the monitor, the index of the workspace, the number of containers and the layout; named-workspace-layout-rule takes the name of the workspace instead. A rule for a count that has one replaces it. The clear commands take every rule of the workspace away and leave it with the layout it has.