Files
komorebi/komorebi/tests/resize.rs
T
LGUG2Z 95eb4d5039 feat(wm): resize from the CLI
`komorebic resize-edge left|right|up|down increase|decrease` moves one edge of
the focused tile, and `resize-axis` both edges along an axis, by the delta that
`resize-delta` sets (50 pixels to start with; komorebi-layouts moves an edge by
half of it). The neighbors give up the room.

A resize is an adjustment of the container's tile that the workspace keeps, one
per container, and that the layout applies whenever it tiles. Before each
tiling, the workspace clears the parts its layout cannot apply, such as the
height of a column. No tile may end up narrower or shorter than a tenth of the
work area, or than it already is: a resize that would make one so is granted as
far as it can go, not dropped.

`retile` drops the adjustments, and the `RetileWithResizeDimensions` message
tiles with them. `save-resize` and `load-resize` write them to a file and read
them back, and `quick-save-resize` and `quick-load-resize` do the same with one
file in the daemon's temporary directory.

The vm-commands sweep gains every resize command, and the saving and loading.
2026-10-28 07:20:37 -07:00

238 lines
7.6 KiB
Rust

//! Resizing the focused window from the command line, `resize-edge`, `resize-axis` and
//! `resize-delta`, and saving and loading the sizes, against an in-memory desktop: the messages go
//! in through [`WindowManager::process_command`], and what comes out is where the backend is asked
//! to put each window.
//!
//! Window ids are in the 23_000s.
use komorebi::backend::fake::FakeBackend;
use komorebi::backend::with_backend;
use komorebi::core::Axis;
use komorebi::core::DefaultLayout;
use komorebi::core::OperationDirection;
use komorebi::core::Rect;
use komorebi::core::Sizing;
use komorebi::core::SocketMessage;
use komorebi::window::Window;
use komorebi::window_manager::WindowManager;
use komorebi::window_manager_event::KWinNotification;
use komorebi::window_manager_event::SystemNotification;
use komorebi::window_manager_event::WindowManagerEvent;
use std::sync::Arc;
fn added(id: u32) -> WindowManagerEvent {
WindowManagerEvent::Show(
SystemNotification::KWin(KWinNotification::WindowAdded),
Window::from(id),
)
}
/// A window manager over a fake desktop with one 1920x1080 monitor (1920x1050 without the panel)
/// in `layout`, and a window for each of `ids`, opened in that order. The last one has the focus.
fn desktop_with(layout: DefaultLayout, ids: &[u32]) -> (Arc<FakeBackend>, WindowManager) {
let fake = Arc::new(FakeBackend::with_one_monitor());
let (_sender, receiver) = crossbeam_channel::bounded(1);
// unix socket paths are limited to ~104 bytes on macOS, which the temp dir alone can exceed
static NEXT: std::sync::atomic::AtomicU32 = std::sync::atomic::AtomicU32::new(0);
let socket = std::path::PathBuf::from(format!(
"/tmp/kmr-{}-{}.sock",
std::process::id(),
NEXT.fetch_add(1, std::sync::atomic::Ordering::SeqCst)
));
let mut wm = with_backend(fake.clone(), || {
let mut wm = WindowManager::new(receiver, Some(socket)).unwrap();
wm.init().unwrap();
wm
});
send(&fake, &mut wm, SocketMessage::ChangeLayout(layout));
for &id in ids {
fake.open_window(id, "foot", "foot", &format!("terminal {id}"));
with_backend(fake.clone(), || wm.process_event(added(id))).unwrap();
}
(fake, wm)
}
fn send(fake: &Arc<FakeBackend>, wm: &mut WindowManager, message: SocketMessage) {
with_backend(fake.clone(), || wm.process_command(message, Vec::new())).unwrap();
}
fn edge(direction: OperationDirection, sizing: Sizing) -> SocketMessage {
SocketMessage::ResizeWindowEdge(direction, sizing)
}
fn rects(fake: &FakeBackend, ids: &[u32]) -> Vec<Rect> {
ids.iter().map(|&id| fake.rect_of(id).unwrap()).collect()
}
#[test]
fn resize_edge_moves_the_edge_between_the_focused_window_and_its_neighbor() {
let ids = [23_001, 23_002];
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &ids);
let before = rects(&fake, &ids);
// the second window has the focus, on the right: its left edge goes left by half the delta
// of 50, which is how komorebi-layouts moves an edge
send(
&fake,
&mut wm,
edge(OperationDirection::Left, Sizing::Increase),
);
let after = rects(&fake, &ids);
assert_eq!(after[1].left, before[1].left - 25, "{before:?} {after:?}");
assert_eq!(after[1].right, before[1].right + 25);
assert_eq!(after[0].right, before[0].right - 25);
send(
&fake,
&mut wm,
edge(OperationDirection::Left, Sizing::Decrease),
);
assert_eq!(rects(&fake, &ids), before);
}
#[test]
fn resize_edge_on_a_side_with_no_neighbor_changes_nothing() {
let ids = [23_011, 23_012];
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &ids);
let before = rects(&fake, &ids);
send(
&fake,
&mut wm,
edge(OperationDirection::Right, Sizing::Increase),
);
assert_eq!(rects(&fake, &ids), before);
assert_eq!(
wm.focused_workspace().unwrap().resize_dimensions,
[None, None]
);
}
#[test]
fn resize_axis_moves_both_edges_along_the_axis() {
let ids = [23_021, 23_022, 23_023];
let (fake, mut wm) = desktop_with(DefaultLayout::Columns, &ids);
send(
&fake,
&mut wm,
SocketMessage::CycleFocusWindow(komorebi::core::CycleDirection::Previous),
);
assert_eq!(wm.focused_window().unwrap().id, 23_022);
let before = rects(&fake, &ids);
send(
&fake,
&mut wm,
SocketMessage::ResizeWindowAxis(Axis::Horizontal, Sizing::Increase),
);
let after = rects(&fake, &ids);
assert_eq!(after[1].left, before[1].left - 25, "{before:?} {after:?}");
assert_eq!(after[1].right, before[1].right + 50);
assert_eq!(after[0].right, before[0].right - 25);
assert_eq!(after[2].right, before[2].right - 25);
}
#[test]
fn resize_delta_sets_how_far_a_resize_goes() {
let ids = [23_031, 23_032];
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &ids);
let before = rects(&fake, &ids);
send(&fake, &mut wm, SocketMessage::ResizeDelta(120));
send(
&fake,
&mut wm,
edge(OperationDirection::Left, Sizing::Increase),
);
assert_eq!(wm.resize_delta, 120);
assert_eq!(fake.rect_of(23_032).unwrap().left, before[1].left - 60);
}
#[test]
fn a_resize_leaves_every_tile_about_a_tenth_of_the_work_area_wide_at_least() {
let ids = [23_041, 23_042];
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &ids);
send(&fake, &mut wm, SocketMessage::ResizeDelta(5000));
send(
&fake,
&mut wm,
edge(OperationDirection::Left, Sizing::Increase),
);
// a tenth of the work area, measured before the paddings are taken off the tiles
let after = rects(&fake, &ids);
assert!(after[0].right >= 1920 / 10 - 20, "{after:?}");
assert!(
after[0].right < 400,
"it was granted as far as it goes: {after:?}"
);
}
#[test]
fn retile_forgets_the_resizes_and_retile_with_resize_dimensions_keeps_them() {
let ids = [23_051, 23_052];
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &ids);
let before = rects(&fake, &ids);
send(
&fake,
&mut wm,
edge(OperationDirection::Left, Sizing::Increase),
);
let resized = rects(&fake, &ids);
send(&fake, &mut wm, SocketMessage::RetileWithResizeDimensions);
assert_eq!(rects(&fake, &ids), resized);
send(&fake, &mut wm, SocketMessage::Retile);
assert_eq!(rects(&fake, &ids), before);
}
#[test]
fn sizes_saved_to_a_file_are_loaded_back_from_it() {
let ids = [23_061, 23_062];
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &ids);
let path =
std::env::temp_dir().join(format!("komorebi-resize-test-{}.json", std::process::id()));
send(
&fake,
&mut wm,
edge(OperationDirection::Left, Sizing::Increase),
);
let resized = rects(&fake, &ids);
send(&fake, &mut wm, SocketMessage::Save(path.clone()));
send(&fake, &mut wm, SocketMessage::Retile);
assert_ne!(rects(&fake, &ids), resized);
send(&fake, &mut wm, SocketMessage::Load(path.clone()));
assert_eq!(rects(&fake, &ids), resized);
std::fs::remove_file(path).unwrap();
}
#[test]
fn loading_sizes_from_a_file_that_is_not_there_is_an_error() {
let (fake, mut wm) = desktop_with(DefaultLayout::BSP, &[23_071]);
let result = with_backend(fake.clone(), || {
wm.process_command(
SocketMessage::Load("/nonexistent/komorebi-resize.json".into()),
Vec::new(),
)
});
assert_eq!(
result.map_err(|error| error.to_string()),
Err(String::from(
"no file found at /nonexistent/komorebi-resize.json"
))
);
}