kglobalaccel keeps the actions of a client that died, and their keys: a daemon that is killed leaves its keys swallowed and running nothing until they are unregistered. And kglobalaccel runs inside KWin, so a KWin that restarts forgets every key komorebi registered. Neither should leave a user without keys. kwin::hotkeys::release unregisters every action of the component, whatever registered it, and komorebic hotkeys release runs it, with or without a daemon. The NixOS module's unit runs it after the daemon stops (ExecStopPost), however it stops, and a start already takes over what is left. The KWin backend's NameOwnerChanged watch now also follows org.kde.kglobalaccel: when it has an owner again, kwin::hotkeys::rebind loads the key bindings into the new one, trying for 15 seconds. Loading moves from the daemon's main into kwin::hotkeys::load, which keeps its settings (Keybindings: file, format, plan mode, engine options), so that reload can read the file again: the message ReloadHotkeys, komorebic hotkeys reload. A new engine replaces the running one without unregistering its keys, and takes them over as a start does, so the keys both files have stay grabbed. The message HotkeysState answers with the engine's mode, the combos it holds and whether a chain is pending (null without an engine); komorebic hotkeys state prints it with the actions kglobalaccel has for the component. komorebic now depends on komorebi for the two calls to kglobalaccel, and on serde_json for the state. Tests: the socket messages without key bindings, state and release without a session bus, reload without a daemon, and a nixos-module-eval check of ExecStopPost. The VM test vm-restart-survival runs the module's unit in a Plasma session: a key works, hotkeys state shows it; with the daemon stopped by SIGSTOP the key runs nothing until hotkeys release gives it back; after SIGKILL the unit's journal shows the release and the restarted daemon has the key; after the KWin process is killed, the daemon registers the key with the new KWin; and a reload of a changed file swaps the key. vm-keys-engine asks the engine and does not sleep. A key that is not grabbed yet reaches the focused window, which showed as a binding that does not run, so the suite presses one once komorebic hotkeys state answers, which it does when the engine has made the calls of its last event: for a mode, for a chord chain beginning and ending, and for the keys of the application that takes the focus. It waits for the old daemon to exit before it starts the next (a daemon started meanwhile failed to load its KWin script), and activates a window until KWin has it (KWin lists a window before it can have the focus). The last check reloads the key bindings with komorebic hotkeys reload while wev has the focus and every binding is for the terminal, a start with no key to grab.
9.7 KiB
Installing komorebi
komorebi is two programs: komorebi, the daemon that tiles the windows, and komorebic, the
command line that controls it. The daemon runs in a KDE Plasma Wayland session with KWin 6.8 or
newer (PLATFORM.md has what it needs from the session).
On NixOS, the repository's flake has a module that installs both programs and starts komorebi with every Plasma session. On any other distribution, build them from source.
There is no binary cache and there are no prebuilt binaries: the Komorebi license does not allow third parties to redistribute binaries, so every installation builds komorebi from source. On NixOS, Nix does that for you, the first time you switch to a configuration that has it.
NixOS
The module
Add the repository to the inputs of your system's flake, and import its module,
nixosModules.default, into your configuration:
{
inputs = {
nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
komorebi.url = "github:LGUG2Z/komorebi-for-kde";
};
outputs =
{ nixpkgs, komorebi, ... }:
{
nixosConfigurations.HOSTNAME = nixpkgs.lib.nixosSystem {
modules = [
komorebi.nixosModules.default
./configuration.nix
];
};
};
}
Then enable it, next to Plasma, in configuration.nix:
{
services.desktopManager.plasma6.enable = true;
services.komorebi.enable = true;
}
The module adds the flake's overlay, which provides pkgs.komorebi-full, to your nixpkgs, so
nothing else is needed. komorebi is built with the flake's nixpkgs and the Rust toolchain that
the repository's rust-toolchain.toml selects, whatever nixpkgs your system uses.
What the module does
- It installs
komorebiandkomorebicin the system profile, so they are on every user'sPATH. - It installs KDE Rounded Corners, the KWin effect that draws komorebi's borders, unless
services.komorebi.effects.borders.enableisfalse, and Geometry Change, the effect that animates windows, unlessservices.komorebi.effects.animation.enableisfalse. KWin finds effects when it starts, so a session that was running when you switched to the new configuration has them after the next login. - It defines a systemd user unit,
komorebi.service, for every user of the machine. Plasma'splasma-workspace.targetstarts it when a user logs in to a Plasma session, afterplasma-core.target, which Plasma orders after KWin. The unit runs the daemon with thePATHof a terminal in the session. - systemd starts the daemon again when it fails or is killed. When it is stopped (
komorebic stop, orsystemctl --user stop komorebi), it stays stopped until the next login orsystemctl --user start komorebi. - After the daemon stops, however it stops, the unit runs
komorebic hotkeys release, which gives back to KDE the keys the daemon had registered for its key bindings: a daemon that was killed could not, and KDE would keep them, doing nothing, until the next start. - Without
services.desktopManager.plasma6.enable, the configuration does not evaluate: an assertion of the module fails, and its message names the option to set.
Options
| Option | Default | What it does |
|---|---|---|
services.komorebi.enable |
false |
Installs komorebi and starts it with every Plasma session. |
services.komorebi.package |
pkgs.komorebi-full |
The package with bin/komorebi and bin/komorebic; the unit runs the first, and both are installed. |
services.komorebi.logLevel |
"info" |
The daemon's --log-level: "error", "warn", "info", "debug" or "trace". |
services.komorebi.config |
null |
The configuration, as Nix: every key of komorebi.json, typed from the schema. The module writes it as a komorebi.json, checks that against the schema, and the unit passes it to komorebi as --config. Ignored if configFile is set. |
services.komorebi.configFile |
null |
A komorebi.json for the daemon, checked against the schema when the system is built. The unit passes it to komorebi as --config, so the daemon reads it and not the komorebi.json of ~/.config/komorebi. The file is in the Nix store: komorebi reads a new one when it starts again. |
services.komorebi.applicationSpecificConfiguration |
enable = true, sources = [ ] |
Files of application specific configuration fetched from GitHub (owner, repo, rev, path and hash each), which become the app_specific_configuration_path of the configuration config makes. There are none by default. |
services.komorebi.effects.borders.enable |
true |
Installs the KWin effect that draws komorebi's borders. Whether borders are drawn is komorebi's own setting (Borders). KWin finds effects when it starts: log in again after the first switch. The module warns when config sets border to true and this is off. |
services.komorebi.effects.borders.package |
pkgs.kde-rounded-corners-komorebi |
The effect: KDE Rounded Corners 0.11.0, built against the KWin of the system and not loaded until komorebi asks. |
services.komorebi.effects.animation.enable |
true |
Installs the KWin effect that animates komorebi's windows going to their places. Whether windows are animated is komorebi's own setting (Animation). KWin finds effects when it starts: log in again after the first switch. |
services.komorebi.effects.animation.package |
pkgs.kwin-effect-geometry-change-komorebi |
The effect: Geometry Change, a scripted effect that is not loaded until komorebi asks. |
services.komorebi.execStart |
read only | The command line the unit starts komorebi with, built from package, logLevel and configFile or config. A unit of your own that runs komorebi uses it to start komorebi the same way. |
config takes the keys of komorebi.json (Configuration) as Nix, and a
value of the wrong kind, or a layout that does not exist, is an error when the configuration is
evaluated:
{
services.komorebi = {
enable = true;
config = {
default_workspace_padding = 15;
monitors = [
{
workspaces = [
{ name = "web"; layout = "BSP"; }
{ name = "code"; layout = "Columns"; }
];
}
];
};
};
}
configFile takes a komorebi.json you wrote:
{
services.komorebi.configFile = ./komorebi.json;
}
Comment lines (starting with //) are taken out of the file before it is checked, which is why
the file can have them. With both, configFile wins, and the module warns that config is
ignored.
Running it
plasma-workspace.target starts komorebi when you log in. In a session that was already
running when you switched to the new configuration, start it yourself:
systemctl --user start komorebi
systemctl --user status komorebi
journalctl --user -u komorebi
komorebic stop stops it until you start it again or log in again.
komorebic start finds the daemon the unit runs and does nothing, and a second
komorebi in the same session exits: the session bus gives the name komorebi needs to one
daemon. Running komorebi has the rest: asking komorebi what it is
doing, and its log.
The packages without the module
The flake's packages are komorebi, komorebic, and komorebi-full, which has both and is the
default, kde-rounded-corners-komorebi, the effect that draws the borders, and
kwin-effect-geometry-change-komorebi, the effect that animates windows. To install them without the unit, and start komorebi yourself:
nix profile install github:LGUG2Z/komorebi-for-kde
On a NixOS configuration, the overlay, overlays.default, provides pkgs.komorebi,
pkgs.komorebic, pkgs.komorebi-full, pkgs.kde-rounded-corners-komorebi and
pkgs.kwin-effect-geometry-change-komorebi for environment.systemPackages.
Other distributions: from source
You need a Plasma 6.8 (or newer) Wayland session, rustup with the stable
toolchain, which rust-toolchain.toml selects, and a C compiler (cc): the crate that makes the
version string builds libgit2, and zlib when the system has none. Then:
git clone https://github.com/LGUG2Z/komorebi-for-kde
cd komorebi-for-kde
cargo install --locked --path komorebi
cargo install --locked --path komorebic
cargo installs both in ~/.cargo/bin, which has to be on your PATH. Start komorebi from a
terminal in your Plasma session with komorebic start.
To start it with every Plasma session instead, komorebic enable-autostart writes an autostart
entry (Quickstart and autostart), or you can write the unit
the NixOS module defines, without the NixOS paths, to ~/.config/systemd/user/komorebi.service:
[Unit]
Description=komorebi, the tiling window manager
After=plasma-core.target
[Service]
ExecStart=%h/.cargo/bin/komorebi
ExecStopPost=%h/.cargo/bin/komorebic hotkeys release
Restart=on-failure
SuccessExitStatus=130
[Install]
WantedBy=plasma-workspace.target
and enable it with systemctl --user enable komorebi. At time of writing (2026-10-27), only the
module's unit has been run, on NixOS; this one has not been tried on another distribution.
Uninstalling
Stop the daemon first, with komorebic stop.
- With the module, remove
services.komorebi.enable(or the module) from your configuration and switch to it. - From source, remove the unit if you wrote one (
systemctl --user disable komorebi, then the file), and the programs, withcargo uninstall komorebi komorebic.
The daemon's logs are in ~/.local/share/komorebi ($XDG_DATA_HOME/komorebi), which you can
delete. Its socket is in $XDG_RUNTIME_DIR/komorebi, which is removed when you log out.