komorebi draws no border. KWin's KDE Rounded Corners effect does, outside each window in the gap the layout leaves, and komorebi says how it looks. The window manager describes a Look (a border with a width, a radius and two colors) and asks the backend for it with Backend::apply_look after every event, message and retile. The backend answers whether borders are being drawn, and the layout leaves room around the windows only while they are: a border with no effect to draw it takes none. The KWin backend writes the effect's settings into the user's kwinrc, with every inner outline off (the effect's default draws one over the title bar), loads the effect when borders are on and has it read them again. It unloads the effect and puts the user's settings back when the borders go or komorebi exits. The module installs the effect (effects.borders), which is built to stay unloaded until komorebi asks, and vm-look reads the pixels around two windows in a real session. The session library of the VM tests also waits for the panel of the Plasma shell now: a window komorebi tiles before the panel is made is tiled under it, which hides the bottom of its border from a screenshot. Kde.wait_for_panel_room waits until the daemon's work area is not the whole of its monitor, which is the daemon having learned that the panel takes room, and vm-look calls it where the daemon starts, before the windows open. The shell makes its panel and KWin takes room for it a while later, which the daemon learns of up to a second after, so a daemon that tiles in between puts the windows under the panel and tiles them again, and a screenshot taken between the two shows frames as high as the screen. It is a wait and not a check, since a session that is too slow, as TCG often is, may never take the room. komorebic gets border, border-width and border-offset, and visible-windows. komorebi.json takes the same settings as border, border_width and border_offset, and border_radius, which has no command. The module warns when config asks for borders and the effect is not installed.
8.7 KiB
Installing komorebi
komorebi is two programs: komorebi, the daemon that tiles the windows, and komorebic, the
command line that controls it. The daemon runs in a KDE Plasma Wayland session with KWin 6.8 or
newer (PLATFORM.md has what it needs from the session).
On NixOS, the repository's flake has a module that installs both programs and starts komorebi with every Plasma session. On any other distribution, build them from source.
There is no binary cache and there are no prebuilt binaries: the Komorebi license does not allow third parties to redistribute binaries, so every installation builds komorebi from source. On NixOS, Nix does that for you, the first time you switch to a configuration that has it.
NixOS
The module
Add the repository to the inputs of your system's flake, and import its module,
nixosModules.default, into your configuration:
{
inputs = {
nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
komorebi.url = "github:LGUG2Z/komorebi-for-kde";
};
outputs =
{ nixpkgs, komorebi, ... }:
{
nixosConfigurations.HOSTNAME = nixpkgs.lib.nixosSystem {
modules = [
komorebi.nixosModules.default
./configuration.nix
];
};
};
}
Then enable it, next to Plasma, in configuration.nix:
{
services.desktopManager.plasma6.enable = true;
services.komorebi.enable = true;
}
The module adds the flake's overlay, which provides pkgs.komorebi-full, to your nixpkgs, so
nothing else is needed. komorebi is built with the flake's nixpkgs and the Rust toolchain that
the repository's rust-toolchain.toml selects, whatever nixpkgs your system uses.
What the module does
- It installs
komorebiandkomorebicin the system profile, so they are on every user'sPATH. - It installs KDE Rounded Corners, the KWin effect that draws komorebi's borders, unless
services.komorebi.effects.borders.enableisfalse. KWin finds effects when it starts, so a session that was running when you switched to the new configuration has the borders after the next login. - It defines a systemd user unit,
komorebi.service, for every user of the machine. Plasma'splasma-workspace.targetstarts it when a user logs in to a Plasma session, afterplasma-core.target, which Plasma orders after KWin. The unit runs the daemon with thePATHof a terminal in the session. - systemd starts the daemon again when it fails or is killed. When it is stopped (
komorebic stop, orsystemctl --user stop komorebi), it stays stopped until the next login orsystemctl --user start komorebi. - Without
services.desktopManager.plasma6.enable, the configuration does not evaluate: an assertion of the module fails, and its message names the option to set.
Options
| Option | Default | What it does |
|---|---|---|
services.komorebi.enable |
false |
Installs komorebi and starts it with every Plasma session. |
services.komorebi.package |
pkgs.komorebi-full |
The package with bin/komorebi and bin/komorebic; the unit runs the first, and both are installed. |
services.komorebi.logLevel |
"info" |
The daemon's --log-level: "error", "warn", "info", "debug" or "trace". |
services.komorebi.config |
null |
The configuration, as Nix: every key of komorebi.json, typed from the schema. The module writes it as a komorebi.json, checks that against the schema, and the unit passes it to komorebi as --config. Ignored if configFile is set. |
services.komorebi.configFile |
null |
A komorebi.json for the daemon, checked against the schema when the system is built. The unit passes it to komorebi as --config, so the daemon reads it and not the komorebi.json of ~/.config/komorebi. The file is in the Nix store: komorebi reads a new one when it starts again. |
services.komorebi.applicationSpecificConfiguration |
enable = true, sources = [ ] |
Files of application specific configuration fetched from GitHub (owner, repo, rev, path and hash each), which become the app_specific_configuration_path of the configuration config makes. There are none by default. |
services.komorebi.effects.borders.enable |
true |
Installs the KWin effect that draws komorebi's borders. Whether borders are drawn is komorebi's own setting (Borders). KWin finds effects when it starts: log in again after the first switch. The module warns when config sets border to true and this is off. |
services.komorebi.effects.borders.package |
pkgs.kde-rounded-corners-komorebi |
The effect: KDE Rounded Corners 0.11.0, built against the KWin of the system and not loaded until komorebi asks. |
services.komorebi.execStart |
read only | The command line the unit starts komorebi with, built from package, logLevel and configFile or config. A unit of your own that runs komorebi uses it to start komorebi the same way. |
config takes the keys of komorebi.json (Configuration) as Nix, and a
value of the wrong kind, or a layout that does not exist, is an error when the configuration is
evaluated:
{
services.komorebi = {
enable = true;
config = {
default_workspace_padding = 15;
monitors = [
{
workspaces = [
{ name = "web"; layout = "BSP"; }
{ name = "code"; layout = "Columns"; }
];
}
];
};
};
}
configFile takes a komorebi.json you wrote:
{
services.komorebi.configFile = ./komorebi.json;
}
Comment lines (starting with //) are taken out of the file before it is checked, which is why
the file can have them. With both, configFile wins, and the module warns that config is
ignored.
Running it
plasma-workspace.target starts komorebi when you log in. In a session that was already
running when you switched to the new configuration, start it yourself:
systemctl --user start komorebi
systemctl --user status komorebi
journalctl --user -u komorebi
komorebic stop stops it until you start it again or log in again.
komorebic start finds the daemon the unit runs and does nothing, and a second
komorebi in the same session exits: the session bus gives the name komorebi needs to one
daemon. Running komorebi has the rest: asking komorebi what it is
doing, and its log.
The packages without the module
The flake's packages are komorebi, komorebic, and komorebi-full, which has both and is the
default, and kde-rounded-corners-komorebi, the effect that draws the borders. To install them without the unit, and start komorebi yourself:
nix profile install github:LGUG2Z/komorebi-for-kde
On a NixOS configuration, the overlay, overlays.default, provides pkgs.komorebi,
pkgs.komorebic, pkgs.komorebi-full and pkgs.kde-rounded-corners-komorebi for
environment.systemPackages.
Other distributions: from source
You need a Plasma 6.8 (or newer) Wayland session, rustup with the stable
toolchain, which rust-toolchain.toml selects, and a C compiler (cc): the crate that makes the
version string builds libgit2, and zlib when the system has none. Then:
git clone https://github.com/LGUG2Z/komorebi-for-kde
cd komorebi-for-kde
cargo install --locked --path komorebi
cargo install --locked --path komorebic
cargo installs both in ~/.cargo/bin, which has to be on your PATH. Start komorebi from a
terminal in your Plasma session with komorebic start.
To start it with every Plasma session instead, komorebic enable-autostart writes an autostart
entry (Quickstart and autostart), or you can write the unit
the NixOS module defines, without the NixOS paths, to ~/.config/systemd/user/komorebi.service:
[Unit]
Description=komorebi, the tiling window manager
After=plasma-core.target
[Service]
ExecStart=%h/.cargo/bin/komorebi
Restart=on-failure
SuccessExitStatus=130
[Install]
WantedBy=plasma-workspace.target
and enable it with systemctl --user enable komorebi. At time of writing (2026-10-27), only the
module's unit has been run, on NixOS; this one has not been tried on another distribution.
Uninstalling
Stop the daemon first, with komorebic stop.
- With the module, remove
services.komorebi.enable(or the module) from your configuration and switch to it. - From source, remove the unit if you wrote one (
systemctl --user disable komorebi, then the file), and the programs, withcargo uninstall komorebi komorebic.
The daemon's logs are in ~/.local/share/komorebi ($XDG_DATA_HOME/komorebi), which you can
delete. Its socket is in $XDG_RUNTIME_DIR/komorebi, which is removed when you log out.