A workspace could show its windows only side by side. Monocle gives one container the whole work area: the focused container is taken out of the workspace's containers, so the layout gives no container a tile, and the next tiling puts its window on the work area less the padding. Turning it off puts the container back at the index it came from, and the tiles come back as they were resized: the container keeps its resize adjustment, and the workspace does not shorten the list of adjustments while a monocle is on. The windows of the other containers are hidden on the parking desktop, as the windows behind the front one of a stack are, and the front window of each is shown again when the monocle is turned off or the window in monocle closes. A stack in monocle stays a stack. `komorebic toggle-monocle` turns it on and off. What focusing in a direction does meanwhile is set with `monocle-focus-behaviour` or switched with `toggle-monocle-focus-behaviour`: with `cycle` the monocle goes to the previous or the next container, with `no-op`, the default, no container is on any side and the focus falls through to the monitor on that side, where the monocle window of its workspace, if it has one, is given the focus, and the command fails where there is no monitor. A container that is moved to a monitor or sent to a workspace in monocle turns that monocle off first. `cycle-focus` always carries the monocle along. Giving the focus to another window gives it back to the monocle window, so that it stays in front. `move` and `cycle-move` are refused and `toggle-float` is ignored while a window is in monocle, since the focused container is not the window in front. The monocle container is in the state, with the index it goes back to, and a window in it that closes takes the monocle with it. komorebi/tests/monocle.rs drives it against the fake desktop, with one monitor and with two. vm-core-e2e checks in a real KWin that the focused window fills the work area, that the state has the monocle container, that toggling back restores the tile, that the cycle behavior gives another window the work area, and that the windows behind a monocle are parked, which a clean stop and the next start after a crash put right; vm-stacks checks a monocle over a stack; the vm-commands sweep runs the new commands.
2.8 KiB
Monocle
A workspace in monocle shows one window: the container that has the focus takes the whole work area, and the layout gives the other containers no tile, and their windows are out of sight, until the monocle is turned off.
komorebic toggle-monocle turns the monocle of the focused workspace
on, for the container that has the focus, and off. The window is put where a window alone in the
workspace would be: the work area less the panels, the workspace padding and the container
padding. Turned off, the container goes back to the place in the order of the workspace it was
taken from, and the layout tiles every container again.
komorebic toggle-monocle
The windows of the other containers are hidden while the monocle is on, the way the windows behind the front one of a stack are, and the front window of each is shown again when the monocle is turned off. A window that opens meanwhile is added to the layout after the focused container, and has its tile when the monocle is turned off. When the window in monocle closes, the monocle is gone and the other windows are shown and tiled again.
Focusing
Giving the focus to another window does not take the monocle with it: komorebi gives the focus
back to the window in monocle, so that it is the one in front. What focusing in a direction
does meanwhile is set with
komorebic monocle-focus-behaviour:
no-op, the default: no container is on any side of the window in monocle, sokomorebic focusgoes to the monitor on that side, as it does at the edge of a layout, and gives the focus to the window in monocle there if its workspace has one. Where there is no monitor on that side it fails, and the daemon logs "there is no container or monitor in this direction".cycle:komorebic focus leftordownmakes the previous container the monocle, andrightorupthe next one.
komorebic toggle-monocle-focus-behaviour switches
between the two. komorebic cycle-focus always carries the monocle to
the next or the previous container, whatever the behavior is.
komorebic monocle-focus-behaviour cycle
komorebic toggle-monocle-focus-behaviour
What is left alone
While a window is in monocle, komorebic move and
komorebic cycle-move are refused, and
komorebic toggle-float does nothing: the daemon logs that it ignores
them. Turn the monocle off first.
In the daemon's state, a workspace in monocle has the container as monocle_container, which
is not one of its containers, and the index it goes back to as monocle_container_restore_idx.