mirror of
https://github.com/LGUG2Z/komorebi.git
synced 2026-11-19 07:08:48 +01:00
f530318ceeb37bbc138f6ea618d5a39c093cdc0d
11
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
4fa8108110 |
feat(kwin): animation through the Geometry Change effect
Windows that jump to their new places are hard to follow. komorebi animates nothing itself: KWin's Geometry Change effect animates a window that a script moves, and komorebi tells it how long that takes. The look the window manager asks the backend for now has an animation, a duration that the settings give for every kind of animation or, when one is set for the movement of windows, for that one. The KWin backend writes the effect's settings into the user's kwinrc (a duration, and no cross-fading, since a window going to its place changes where it is and not what it shows), loads the effect when animation is on, and unloads it and puts the settings back when it is off or komorebi exits. komorebic gets animation, animation-duration and animation-fps. The module installs the effect (effects.animation), and the session node sets the variable that makes KWin load effects that animate under software rendering. vm-look reads the screen a moment after a flip of the layout, with a 30 s animation and without one. The commands that change a stack turn the animation off while they run, as komorebi does elsewhere, and komorebi.json takes an animation key (enabled, duration and fps, each for every kind of animation or for one). |
||
|
|
22c14ba5be |
feat(kwin): a border color for each kind of window
The stock KDE Rounded Corners has one color for the active window and one for the others, and komorebi colors a window by what it is to the layout: the focused window, the others, a locked container that does not have the focus, a floating window that has it, a stack, a monocle. komorebi's build of the effect takes a color for each window over D-Bus. After every event and message the border manager works out the kind of each window and tells the backend, which sends the effect what changed, and tells it that no window has a color when borders are off. Without that build the borders are the look's two colors, and the backend says so once. komorebic gets border-colour. The fake desktop keeps the colors it was told, and gets window_commands, which leaves the look out of the list of what the window manager asked for. vm-features reads the colors of the kinds of window in a real session. The colors of a stack and of a monocled window are read from the fake and, in vm-features, from the pixels. The border_colours key of komorebi.json is not here: its colors are written as the Colour of komorebi-themes, which the themes (49) bring, and 49 adds the key. The maximize check of vm-features, which was the whole suite, reads a pixel a quarter of the way into the window and not the middle one: komorebi puts the pointer in the middle of the window it focuses, and a screenshot has the arrow on it, white. It read the arrow on most runs once the border effect was loaded. vm-features waits for the panel's room too, where it starts the daemon for its sections B to E: the border colors of section C are read from the pixels around a window, which the panel can cover. |
||
|
|
3a3a0f8f24 |
feat(wm): JSON schemas, and the module's typed options
komorebi.json is described as a JSON Schema, made from the Rust types that read it: komorebic prints the schema of komorebi.json, of an applications.json, of a notification and of a message, and the daemon answers the same four questions on its socket. schema.json and schema.asc.json are committed (just jsonschema). The module's config option is typed from the schema: schemars-nixgen makes nix/komorebi-options.nix from schema.json (just nixgen), so a layout komorebi does not have, or a value of the wrong kind, does not evaluate. The module writes config as a komorebi.json and gives it to the daemon with --config. configFile and the file the module writes are checked against the schema when the system is built. applicationSpecificConfiguration takes files from GitHub, and there are none by default, since no community file for Plasma is known. Two checks keep the generated files honest without the tools that make them. schema-fresh compares the schemas with what komorebic prints, and the hash on the first line of the options with the schema. nix-options-validation evaluates the options against the example configuration, written in Nix and in JSON. nixos-module-eval also evaluates the module with the sources turned off: with applicationSpecificConfiguration.enable = false the sources are left out of the config that is written, and with no config either there is nothing to write and the unit passes no --config. ARCHITECTURE has the guarantee row that names the two checks. |
||
|
|
a86e2bdc63 |
build(nix): a NixOS module for komorebi
On NixOS, running komorebi should take one flake input and one module line. The flake exports `services.komorebi` as nixosModules.default (and .komorebi). It adds the flake's overlay, which gains komorebi-full, installs komorebi and komorebic, and runs the daemon in every Plasma session as a systemd user unit, wanted by plasma-workspace.target and ordered after plasma-core.target, which Plasma orders after KWin. systemd starts a daemon that fails again; the exit status of a SIGTERM (130) counts as success, so a stopped unit is not failed. The unit's PATH is the one a terminal in the session has, instead of the few store paths NixOS gives a unit. The options are enable, package, logLevel and a read-only execStart, the command line the unit runs. There is no configFile: the daemon reads no configuration file yet, and an option that linked one would do nothing. nixos-module-eval evaluates seven scenarios as real NixOS systems and checks their assertions, the unit and execStart, with builtins.tryEval for the two that must not evaluate. Nothing in it builds a Linux package, so it runs on a Mac as well. The VM nodes import the module, so every suite runs komorebi as the module installs it. The headless node's komorebi@NAME runs execStart, which has --log-level, so the nodes set logLevel to debug and the suites stop passing it; latency, which times the daemon, keeps the default level. The session node starts the module's unit at login; render-smoke turns it off, since a tiled terminal would cover the desktop it looks at. A new fast suite, vm-module, logs in to Plasma and checks that the unit runs the daemon with the module's log level and PATH, that a window opened in the session is tiled, that a killed daemon is started again, and that a stop is not a failure. docs/installation.md covers NixOS first, and building from source on other distributions. There is no binary cache: the Komorebi license does not allow third parties to redistribute binaries. |
||
|
|
6f657e53e3 |
feat(cli): komorebic
The daemon answers on its socket, but a person has no way to write a message on it. komorebic is that way: each subcommand that asks something of the daemon is one message, sent with komorebi-client, and a question's answer is printed. komorebic is a separate program because the daemon takes no input but its socket, so a key binding, a script and a terminal all drive it the same way. It has what the daemon can answer so far: state, monitor-information, query, retile and stop. Around them, start runs the komorebi on the PATH in the background and passes it what follows a --, such as --fake-backend to try it without a compositor; log follows the daemon's log, which the daemon now writes to a file a day in LOG_DIR as well as to stdout; data-directory shows where the socket is; completions prints a shell completion script. The hidden docgen writes each subcommand's help to docs/cli, in fences that name their language and wrapped at 100 columns whatever the width of the terminal, so that the pages are the same wherever they are generated; just docgen runs it. The user guide starts here: docs/index.md for KDE Plasma, and a page on running komorebi. tests/cli.rs runs each subcommand against a socket the test serves in place of the daemon. In the VM tests the guests get komorebic next to the daemon, and vm-core-e2e reads the daemon's state with it (the windows it manages, the one it focuses, after KWin restarts too) and stops it with komorebic stop, which unloads the bridge and removes the socket. In the VM test library, Kde.state asks again, a second (times the scale) after an empty answer or a failed command, up to 10 times. The daemon drops a query when it cannot take hold of the window manager within a second, and komorebic then prints an empty line and succeeds; komorebic itself gives the daemon a second to answer and fails when that is not enough. A daemon busy with the first windows does either on a machine that is loaded or slow, and a suite that polled the state died on JSONDecodeError. An answer that is not JSON still fails at once. |
||
|
|
15ec3c1274 |
feat(kwin): read the desktop through a script in KWin
KWin has no protocol that lets another process read or set the geometry of a window, but its scripting API has both, and a signal for every change the window manager follows. So the KWin backend is in two parts: bridge.js, a script the daemon loads into KWin, which reports what KWin sees and holds no window manager logic, and a D-Bus service in the daemon, org.komorebi.Bridge, which the script calls with every event as a JSON string. Every decision about what an event means is made by the table in kwin::state, which is pure and is unit-tested with the JSON the script sends: which windows may be managed, the ids komorebi gives KWin's windows, and the Show, Destroy, FocusChange, Minimize and Restore events of the window manager. Events reach the window manager in the order KWin raised them: the Event interface handles its calls inline (zbus reordered them otherwise), and one channel and one thread, window_manager_event_listener and listen_for_events, carry them on. Commands go to the script as the answer to a Poll call that the script always has open and the daemon holds until it has something to send: in the spikes this was as fast as any other channel, and it makes one call every 10 seconds when nothing happens. Here the only command is the cursor query. Every command of the Backend trait is refused with "the KWin backend only reads the desktop", so the daemon follows KWin and moves nothing. The bridge is JavaScript that KWin runs as it is, and it gets types and tests without a JavaScript build chain. tsc checks it as strict TypeScript through JSDoc types of every message, against kwin-api.d.ts, a declaration of the part of KWin's scripting API it uses, in which every property is read-only and callDBus takes one string. bridge.test.js runs it under node --test against a fake KWin in a node:vm context. The messages of a session are JSON fixtures that both sides' tests read: the bridge's tests check that it sends those events, and the table's and the backend's tests read the same events and commands, so a message cannot change on one side alone. just check-js and the flake's komorebi-bridge-js check run both, with nodejs and typescript from nixpkgs; there is no package.json. The daemon now connects to KWin by default, and --fake-backend is hidden. The VM suite vm-kwin-events starts it against a headless KWin and checks, from its debug log, that the script loads and reports what was open, that KWin's signals arrive as events and in order, and that stopping the daemon unloads the script. docs/dev/PLATFORM.md starts with what komorebi needs from Plasma. zbus 5's zvariant, zbus_names and zvariant_derive are flagged unmaintained, since their code moved into zbus 6; deny.toml ignores the three advisories. |
||
|
|
0725705298 |
ci(github): run the VM tests on KVM
`discover` asks the flake for the suites of each tier (`legacyPackages.x86_64-linux.vmTiers`) and hands them to two matrices, so a new directory under `nix/tests/vm/suites` is run without an edit to the workflow. `vm-fast` runs the fast tier on every pull request, one machine per suite, as a sandboxed `nix build` of the check. `vm-slow` runs on master, every week, and on a pull request labeled `ci:vm-slow`; it builds the driver and runs it by hand, outside the sandbox, so that the screenshots and journals of a failed run are uploaded with `if: always()`. A composite action installs nix with the store cached and, for the VM jobs, frees disk space (a Plasma guest is a closure of about 10 GB), writes the udev rule that makes /dev/kvm writable for the runner's user, checks it with `test -w`, and adds `kvm` to nix's system features. KVM on hosted runners is documented for public repositories only. Whether this private repository has it is not known: the first run of these jobs says, and if it does not, they need a different runner. `lint` no longer runs `nix flake check`: on Linux that now boots every VM suite, which a runner with no KVM cannot do. It builds the checks that need no virtual machine, and `vm-lib`, the library's own tests. CONTRIBUTING.md and docs/dev/vm-tests.md say what runs where. |
||
|
|
3c51b9b4bf |
build(nix): a NixOS test framework for headless KWin
The unit tests run against a fake desktop and cannot say whether KWin does what the daemon asks. This adds the other half: NixOS machines with Plasma in them, a real KWin, and a Python library to drive it. Every directory under `nix/tests/vm/suites` is a test. The generator lists the directory, so a new suite appears as `checks.<system>.vm-NAME` on Linux and as `legacyPackages.<system>.vm.NAME` everywhere, with no edit to the flake. A suite names its tier and its node and has a `test.py`; `legacyPackages.<system>.vmTiers` lists the names of each tier as JSON for the CI matrix, `vmGuests` the guests to build on a Linux builder, and `vmTcg` the same suites for a machine with no KVM. `scale` multiplies every wait: 1 for KVM, 1.5 for HVF, 8 for TCG. The headless node runs `kwin_wayland --virtual` as user units of a lingering user, one pair of units per session (`session-bus@NAME`, `kwin-virtual@NAME`), so a test can run several sessions with their own bus and socket. A virtual KWin has no output to draw on, so anything that needs pixels or a pointer needs the session node. The library, `komorebi_vm`, has `Checks` (counted checks that fail once, at the end) and `Kde` (start a session, run clients and tools inside it, read windows through kdotool, poll with `wait_for`). It depends on a small `Machine` protocol rather than on the test driver. The `vm-lib` check runs its unit tests against a fake machine, with ruff and ty. The driver type checks each `test.py` with ty, which is how a protocol that did not match `QemuMachine.execute` was caught. `vm-kwin` starts a KWin with two outputs, spawns a foot window, reads it back, starts a second session and checks that it cannot see the first. On a Mac the guest is built on a Linux builder and the driver run directly, because the macOS nix sandbox cannot give QEMU the hypervisor: `scripts/vm-mac`, `just vm NAME`. docs/dev/vm-tests.md covers this, adding a test, and the builder. |
||
|
|
3a20a60823 |
ci(github): check with nix on every push
`ci.yaml` runs two jobs on GitHub-hosted runners, gated on the repository name so that forks do not run them. `cargo-deny` checks licenses, advisories and sources. `lint` runs `nix flake check`, which builds every check of the flake, and the repository's own macro rules from the justfile. The triggers are the ones komorebi for Mac uses: pull requests, pushes to master, feature and hotfix branches, version tags, a weekly schedule and a manual run. The Nix store is cached with cache-nix-action, which needs no account. komorebi follows the tip of nixpkgs-unstable, so `flake.lock` moves, and KWin with it. `update-flake-lock.yaml` opens a pull request each week with the title `chore(deps): flake.lock: Update`; the same jobs run on it, which is what says whether the new KWin still works. Dependabot keeps the actions and the crates up to date, and the pull request template carries over from komorebi for Mac. CONTRIBUTING.md describes what CI runs. |
||
|
|
9524b777b3 |
build(nix): build and check on Linux and macOS
The flake builds the workspace with crane and checks it the way `just check` does, so that CI and a laptop run the same things: `komorebi-workspace-fmt` (nightly rustfmt, since rustfmt.toml uses unstable options), `-clippy` with warnings denied, `-doc` with rustdoc warnings denied, `-toml-fmt`, `-deny` and `-nextest`. Treefmt and a pre-commit hook format Rust, Nix, TOML and the justfile. `nix develop` gives a toolchain with the nightly rustfmt, cargo-deny, nextest and udeps. Linux is where komorebi runs, so only Linux gets packages and the overlay. An Apple silicon Mac gets the dev shell, the formatter and the checks; the tests there run against the fake desktop that arrives with the backend trait. x86_64-darwin is left out because nixpkgs 26.11 dropped it, and the flake follows the tip of nixpkgs-unstable. The commit hash is a constant (`nix-check`) for the dependencies and for every check, and the real one only goes into the final build. The version crate reads it with `env!`, so putting it in the shared arguments would rebuild the dependencies and rerun every check for each commit. The README and CONTRIBUTING.md describe `nix develop` and `nix flake check`. |
||
|
|
426409fcfc |
chore(repo): a workspace of two crates
komorebi for KDE is built up as a Cargo workspace with one crate per concern, the way komorebi and komorebi for Mac are. The first two crates are the `komorebi` daemon, which does nothing yet but report its version, and `version`, which owns the string every binary of the workspace reports. `version` reads the commit from git when HEAD is on a branch, and from COMMIT_HASH otherwise. A jj workspace leaves HEAD detached, so `.cargo/config.toml` defaults the variable to `unknown` (nix will set the real commit), and a plain `cargo build` in a jj checkout compiles. The tooling files come from komorebi for Mac: the licence, deny.toml (trimmed to the licences in use), rustfmt.toml and the toolchain file. `just check` runs the formatting check, clippy and rustdoc with warnings denied, and the tests. rustfmt.toml uses an unstable option, so formatting needs a nightly rustfmt. The `rg` calls in `just lint` name a path because rg reads stdin when it is given none and stdin is not a terminal. The README and CONTRIBUTING.md say how to run, check and commit. |