Where a window that opens goes, from the placement rules of the
config: none, Primary, a number as a number and as text, and rules by
title for the first and the last place. restart_with starts the daemon
afresh with a komorebi.json the scenario gives. KdePlatform.spawn
quotes the title, which a title with spaces needs. core-e2e runs it as
section 12a.
Checks.known_failure records a check that fails for a reason that is
to be followed up on: the suite does not fail, the totals say how many
known failures there are, and one that holds fails the suite so the
marker goes. unknown_monitor takes the reason, and core-e2e runs it
last, because the window it loses stays lost. BEHAVIOUR.md says so.
The daemon stops, every window stays, and a daemon that starts again
manages the windows that were in view, tiled inside the work area and
clear of each other, and also a window opened afterwards. The fake
platform learns to stop and to start with no memory of workspaces.
core-e2e runs it before its final stop.
commands is every layout, a sweep of 216 commands and the commands that
only print, each of which must be understood and leave the daemon healthy
(it answers state and manages the windows the OS has). A command the port
lacks, which komorebic says with 'unrecognized subcommand', is skipped with
its name, which is what a behaviour matrix is made of: Checks.skip records
it and finish prints how many. The commands suite runs it instead of its
own copy of the list: 270 checks pass, none skipped.
rules gives the daemon an initial rule, a rule that is not, and an ignore
rule, by title, and checks where each window goes. It found that
enforce-workspace-rules applies initial rules again on purpose, so the
scenario asks whether the daemon sends the window back on its own.
hotplug unplugs a display, plugs one in and sends a window to it, and
starts by plugging one in if the platform has only one. Platform gets
displays, add_display and remove_display, and KdePlatform does them with
kscreen-doctor. The hotplug suite runs it: 34 checks pass.
core-e2e runs rules after the others, then leaves a window for the stop to
leave behind: 130 checks pass on KVM. One run failed the check that the
daemon had exited after komorebic stop and the next did not; the cause is
not known, and the suite now prints the unit's status when it happens.
Snapshot.workspace_of tells which workspace has a window.
monocle toggles monocle on the focused window and checks that it fills the
work area up to the layout's padding, that the state has it as the monocle
container, that every other window is put away, that it keeps the focus,
and that toggling back puts every window in view on the tile it had.
closing closes a window and checks that the OS has no frame for it, that
the daemon manages one window fewer, and that the windows left in view
take more room between them, inside the work area and clear of each other.
Platform.close closes a window as its button would; KdePlatform does it
with kdotool. The fake daemon models monocle and closing, and its
os_window now knows the workspace a window is on, which the workspaces
scenario had passed without. core-e2e runs both: 120 checks pass on KVM.
core-e2e writes the komorebic state of kfde, with three tiled windows and
with one stacked onto another, into its output, and the files are kept in
tests/fixtures beside kfw's three, recorded from a Windows guest (tiled,
stacked, one window floated). test_recorded.py reads all five with the
same checks: three containers of one window, a layout rectangle for each
inside the work area, each window where its container's rectangle is up to
a terminal cell (foot rounds to cells, kfw's test window does not), and a
stack that is a container of two whose focused window is the one the ring
names. Nothing in the parser had to change; the checks passed on the first
real kfw state.
The scenes written from the serializers stay for the shapes no run has
recorded. The sync script copies the fixtures too. The workspaces scenario
prints which windows are in view after the switch: one run of core-e2e
failed that check and passed on the next, and the log did not say which
window had been in view.
workspaces sends the focused window to workspace 1, checks that it is put
away and that the daemon has it there while the others stay in view,
switches to workspace 1 and checks that only that window is in view and has
the focus, and switches back.
hidden now says a window is out of sight for any reason the daemon has: on
KDE that is the parking desktop and also a desktop that is not the one in
view. Snapshot's workspace, containers and focused_title take the focused
workspace when none is given, and the fake daemon has two workspaces. The
scenario passes in core-e2e on KVM: 106 checks.
hidden says that a window exists but the daemon has put it away: the others
of a stack, here, and later those of another workspace or behind a monocle.
It is a window on the parking desktop on KDE and will be a cloaked one on
Windows. scenarios.stacks stacks the focused window onto its neighbor,
cycles the stack, checks that the window in view has the focus and fills
the tile the first had, and takes the stack apart.
The scenario's fake daemon now models stacks. Running it on KDE found a bug
in Snapshot: focused_title took the first window of the focused container,
and a stack's focused window is the one its ring names. Snapshot keeps that
index now. core-e2e runs the scenario after the others: 98 checks pass on
KVM.
focus moves the focus with focus and cycle-focus and checks that the OS and
the daemon's state agree on the window that has it and that no window moved.
moving swaps the focused window with its neighbor with move and puts every
window back with cycle-move, and checks that the focus stays with it. Both
read the windows through the Platform, so they are what kfw's suite will
run.
Their unit tests run against a fake daemon that follows the commands over
three tiles, and against two that do not (a move that moves nothing, a move
that loses the focus). core-e2e runs them after tiling on KDE: 85 checks
pass on KVM.
KdePlatform is a Kde session seen through the neutral vocabulary: kdotool
for the OS's frames, foot for clients, the cell of its font as the
tolerance. The core-e2e suite runs scenarios.tiling through it as a new
section, so that the scenario that will run on Windows is checked on the
one platform that works; the suite's own sections are unchanged. It passes
on KVM (74 checks) on the WSL2 machine.
A workspace could show its windows only side by side. Monocle gives one
container the whole work area: the focused container is taken out of the
workspace's containers, so the layout gives no container a tile, and the next
tiling puts its window on the work area less the padding. Turning it off puts
the container back at the index it came from, and the tiles come back as they
were resized: the container keeps its resize adjustment, and the workspace does
not shorten the list of adjustments while a monocle is on.
The windows of the other containers are hidden on the parking desktop, as the
windows behind the front one of a stack are, and the front window of each is
shown again when the monocle is turned off or the window in monocle closes. A
stack in monocle stays a stack.
`komorebic toggle-monocle` turns it on and off. What focusing in a direction
does meanwhile is set with `monocle-focus-behaviour` or switched with
`toggle-monocle-focus-behaviour`: with `cycle` the monocle goes to the previous
or the next container, with `no-op`, the default, no container is on any side
and the focus falls through to the monitor on that side, where the monocle
window of its workspace, if it has one, is given the focus, and the command
fails where there is no monitor. A container that is moved to a monitor or sent
to a workspace in monocle turns that monocle off first. `cycle-focus` always
carries the monocle along. Giving the focus to another window gives it back to
the monocle window, so that it stays in front. `move` and `cycle-move` are
refused and `toggle-float` is ignored while a window is in monocle, since the
focused container is not the window in front. The monocle container is in the
state, with the index it goes back to, and a window in it that closes takes the
monocle with it.
komorebi/tests/monocle.rs drives it against the fake desktop, with one monitor
and with two. vm-core-e2e checks in a real KWin that the focused window fills
the work area, that the state has the monocle container, that toggling back
restores the tile, that the cycle behavior gives another window the work area,
and that the windows behind a monocle are parked, which a clean stop and the
next start after a crash put right; vm-stacks checks a monocle over a stack; the
vm-commands sweep runs the new commands.
With the focus moving, the next thing a key has to do is move the focused
window. `komorebic move left|right|up|down` swaps the focused container with the
one whose tile is on that side, as the layout sees it, and `komorebic cycle-move
next|previous` with the next or the previous one in the workspace's order. The
workspace is tiled again, the window that moved keeps the focus, and the pointer
follows it.
The swap goes through the lockable sequence, so a lock stays with its index: the
container moved onto a locked index is locked in its place.
Moving towards a side with no window fails and moves nothing. Moving into the
next monitor comes with more than one monitor, and the floating layer's own move
with the floating layer.
The VM test moves a window in a real KWin and back, and checks that KWin has
every window where komorebi asked.
A tiling window manager is driven from the keyboard, and the first thing a key
has to do is move the focus. `komorebic focus left|right|up|down` gives the
focus to the window whose tile is on that side of the focused one, as the layout
sees it, and `komorebic cycle-focus next|previous` to the next or the previous
window in the workspace's order, wrapping around. Neither moves a window: the
focus changes, the tiles stay.
The pointer follows the focus, through KWin's "Move Mouse to Focus", unless
`mouse-follows-focus disable` (or `toggle-mouse-follows-focus`) says not to.
Focusing towards a side with no window fails and changes nothing. Crossing into
the next monitor, as komorebi does on the other platforms, comes with more than
one monitor; so do eager-focus and the parts that depend on the monocle,
maximized and floating windows.
The VM test now drives the focus with komorebic in a real KWin and checks that
KWin and komorebi agree on the focused window afterwards.
On NixOS, running komorebi should take one flake input and one module line. The
flake exports `services.komorebi` as nixosModules.default (and .komorebi). It
adds the flake's overlay, which gains komorebi-full, installs komorebi and
komorebic, and runs the daemon in every Plasma session as a systemd user unit,
wanted by plasma-workspace.target and ordered after plasma-core.target, which
Plasma orders after KWin. systemd starts a daemon that fails again; the exit
status of a SIGTERM (130) counts as success, so a stopped unit is not failed.
The unit's PATH is the one a terminal in the session has, instead of the few
store paths NixOS gives a unit.
The options are enable, package, logLevel and a read-only execStart, the command
line the unit runs. There is no configFile: the daemon reads no configuration
file yet, and an option that linked one would do nothing.
nixos-module-eval evaluates seven scenarios as real NixOS systems and checks
their assertions, the unit and execStart, with builtins.tryEval for the two that
must not evaluate. Nothing in it builds a Linux package, so it runs on a Mac as
well.
The VM nodes import the module, so every suite runs komorebi as the module
installs it. The headless node's komorebi@NAME runs execStart, which has
--log-level, so the nodes set logLevel to debug and the suites stop passing it;
latency, which times the daemon, keeps the default level. The session node
starts the module's unit at login; render-smoke turns it off, since a tiled
terminal would cover the desktop it looks at. A new fast suite, vm-module, logs
in to Plasma and checks that the unit runs the daemon with the module's log
level and PATH, that a window opened in the session is tiled, that a killed
daemon is started again, and that a stop is not a failure.
docs/installation.md covers NixOS first, and building from source on other
distributions. There is no binary cache: the Komorebi license does not allow
third parties to redistribute binaries.
The daemon answers on its socket, but a person has no way to write a message on
it. komorebic is that way: each subcommand that asks something of the daemon is
one message, sent with komorebi-client, and a question's answer is printed.
komorebic is a separate program because the daemon takes no input but its
socket, so a key binding, a script and a terminal all drive it the same way.
It has what the daemon can answer so far: state, monitor-information, query,
retile and stop. Around them, start runs the komorebi on the PATH in the
background and passes it what follows a --, such as --fake-backend to try it
without a compositor; log follows the daemon's log, which the daemon now writes
to a file a day in LOG_DIR as well as to stdout; data-directory shows where the
socket is; completions prints a shell completion script. The hidden docgen
writes each subcommand's help to docs/cli, in fences that name their language
and wrapped at 100 columns whatever the width of the terminal, so that the pages
are the same wherever they are generated; just docgen runs it.
The user guide starts here: docs/index.md for KDE Plasma, and a page on running
komorebi. tests/cli.rs runs each subcommand against a socket the test serves in
place of the daemon. In the VM tests the guests get komorebic next to the
daemon, and vm-core-e2e reads the daemon's state with it (the windows it
manages, the one it focuses, after KWin restarts too) and stops it with
komorebic stop, which unloads the bridge and removes the socket.
In the VM test library, Kde.state asks again, a second (times the scale) after
an empty answer or a failed command, up to 10 times. The daemon drops a query
when it cannot take hold of the window manager within a second, and komorebic
then prints an empty line and succeeds; komorebic itself gives the daemon a
second to answer and fails when that is not enough. A daemon busy with the first
windows does either on a machine that is loaded or slow, and a suite that polled
the state died on JSONDecodeError. An answer that is not JSON still fails at
once.
With the commands of the Backend trait carried out, the daemon tiles a real
KWin. A command looks up the UUID KWin knows the window by, is queued as JSON
for the bridge, and returns; the held Poll call is answered with the queue, one
millisecond after the first command, so that a retile reaches KWin as one batch.
The bridge sets the frame, activates, raises, minimizes, restores or closes the
window, and reports what it could not do. set_rect records the frame it asked
for in the table, so the window manager sees it at once, and the geometry event
that follows says what the client made of it.
A KWin script cannot move the pointer, so the pointer follows the focus through
KWin's own "Move Mouse to Focus" action, invoked over kglobalaccel once KWin
reports the window active.
The commands are typed in bridge.js, and the declarations of KWin's API let the
bridge set a window's frame, its minimized state and the active window, raise
and close it, and nothing else. The session the tests of both sides share grows
a second batch: the backend's tests check that set_rect, focus, raise, minimize,
unminimize and close send it, and the bridge's tests answer the bridge with it
and check what KWin is asked to do, down to the command for a window that has
closed, which comes back as failed. The bridge's tests also cover findWindow's
fallback to KWin's list, a frame set as a plain object, and a command KWin
throws on.
Three VM suites check it against a real KWin. vm-core-e2e (from the spike's
m2-e2e, the sections that need no komorebic) compares what the daemon asked for,
read from its debug log, with what KWin has, read with kdotool: three windows
inside the screen, not overlapping, sharing it, the same focused window on both
sides, and the same again after a minimize, a restore and a close.
vm-client-geometry (slow) has eight real clients answer the frames komorebi asks
for: Qt programs and xterm take them exactly, foot sizes itself to whole cells,
GTK 4 programs and Firefox keep to their minimum sizes. vm-latency (slow) times
retiles from a recording of the session bus: on HVF, from the daemon's answer to
the last frame KWin reports, p50 17.3 ms, p95 27.7 ms. vm-kwin-events no longer
checks that nothing moves. The VM library gives session commands the test user's
home and data directories rather than root's, which a GTK client was refused.
The bridge's second request for a position after a resize, which matters for
windows off the screen, comes with the scrolling layout.