While the screen is locked or the machine is asleep, KWin sends its clients no
frame callbacks, so nothing komorebi asked for in that time is done: a window
that something else moved stays where it was moved, and the monitors can come
back in another order or at another size. Nothing told komorebi it had happened,
and it kept the layout it had until the next event.
kwin::power now watches for the two ends of it: logind's PrepareForSleep on the
system bus, which only logind may send, and the lock screen's ActiveChanged on
the session bus. When the machine wakes (2.5 seconds after it, while the outputs
are found one after another) or the screen is unlocked (0.6 seconds after it,
once the lock screen has gone), the monitor reconciliator gets a Wake and calls
wake_up: it reconciles the monitors as for an unplug, reads their sizes, follows
the windows to the monitors they are on and tiles every monitor, unless the
window manager is paused. Going to sleep and locking do nothing, and a machine
with no system bus or a session with no lock screen runs without them. The lock
screen is a window of KWin's that the bridge already does not report as an
application window, so it has no tile.
The bridge also compares KWin's active window with the one it last announced
once a second, because the window that is active again after an unlock is not
always announced. vm-lock-sleep locks and unlocks a real Plasma session and
checks that the windows come back to their tiles; a real suspend cannot be
tested in the QEMU guest, only the signal wiring, which tests/power.rs covers on
private buses.
vm-lock-sleep waits for the panel's room before it opens the windows, so that
they are tiled once, and compares the window that was moved with the tile the
daemon has for it when it looks, give or take a cell of the terminal's font, and
not with the frames read earlier: the room can come while the screen is locked,
and the tiles read before are then not the ones. The wait is not a check,
because a session on a machine as slow as TCG may never take the room.
A window can be moved to another output by something other than komorebi: a KWin
shortcut that sends it to the next screen, the window menu, an application.
komorebi had it in a container of the old monitor, whose tile is on a screen the
window is not on, so it sat untiled where it landed.
The bridge now reports a window's output changing, with the frame the window has
by then, since the signal and the frame arrive in no fixed order, and the table
makes it an OutputChange event. The window manager handles it with
WindowManager::follow_windows_to_their_monitors: every container whose focused
window, and every floating window, is on another monitor than the one it has it
on moves whole to the workspace of the same number on the monitor that holds the
middle of its frame, and the monitors that changed are tiled. Every window is
looked at, not only the one in the event, and a move komorebi made itself is in
its state already and finds nothing to do.
Nothing is followed while the user drags a window: the end of the drag decides
where that window goes, so the method returns at once while a move or a resize
by the user is going on.
KWin also moves windows for a moment after outputs come and go, so the monitor
reconciliator looks again 1.5 seconds after each notification, where it used to
trust what it found at once. vm-hotplug sends windows over with kdotool as well
as with komorebic.
KWin takes the windows of an output that goes to the outputs that are left and
puts them where it likes, so komorebi's tiles for them were on a screen that was
gone and the windows sat untiled where they landed. The monitor reconciliator
now deals with a change in the set of monitors: the table announces it as a
display connection change instead of a resize, and reconcile_display_change
reads the monitors again, keeps each one that went (workspaces, layouts,
paddings, offsets) in a cache, has the window manager move what was on it to the
monitors that are left, and removes it.
The move is WindowManager::evacuate_monitor, in the new reconcile module: each
container and floating window goes to the workspace of the same number on the
monitor that holds the middle of its window, or on the first monitor that is
left when it is on none, and the workspaces that changed are tiled. A stack goes
as one container, and a monocle and a maximized window come as ordinary
containers. A monitor that is plugged in takes what was cached under its serial
number id, less the windows that closed or that the window manager has elsewhere
by now, so it comes back with its settings and none of the windows it had. A
monitor komorebi never saw gets workspaces of its own, and when the compositor
reports no output at all nothing is done.
The workspace rules of a monitor that goes are dropped, and those of the
workspaces of one that comes back apply again. komorebi.json fills the cache as
well: a monitor that has the entry its display index preference names is kept
with it, and so is the entry of each preference whose monitor is not connected,
which that monitor takes when it is plugged in.
vm-hotplug now sends two windows to the other monitor with komorebic, disables
that output, enables it again and sends a window over once more.
When an output gets another resolution or scale, or a panel starts, grows or
hides, the work area the layout fills is not the one komorebi tiled in, and
nothing moved the windows until something else tiled them again.
The bridge now sends the outputs, with their geometry and the work area of the
desktop each shows, when KWin says they changed, when a dock window opens,
closes or moves, and once a second, because KWin has no signal for the room a
panel leaves. The table turns a monitor whose size or work area changed into a
monitor notification. It is not a window event, since it is about no window: it
goes to the monitor reconciliator, a thread that takes the window manager's lock
as the threads of events and messages do, reads the size and work area of every
monitor again and tiles the workspace in front of the focused monitor. Another
monitor's windows keep their tiles until a retile. Every subscriber is notified
of it, whether or not the state changed.
vm-hotplug starts with the scale of one of two outputs changing under a running
daemon. The VM library gets kde.outputs, which lists, disables, enables and
scales outputs, for the commits that unplug and plug them.
A theme gives the borders their colors, in place of choosing the color of each
kind of window: a Catppuccin theme, a Base16 theme or a palette of one's own,
with the color it gives each of the six kinds of border and its default for the
ones it does not name. The Theme message puts the six colors where the border
manager keeps them and asks for the look again. The palette of a picture is made
by the same generator as komorebi for Windows, which takes seconds for a large
picture, so each one is kept in the cache directory, in a file named for the
picture, a hash of its path, size and time of last change, and the variant: the
palette of a picture painted over, or of one of the same name in another folder,
is made again and not mistaken.
The themes come from komorebi-themes at the revision komorebi-layouts is at. It
pulls egui for its types, which the license list, the sources and the advisories
of deny.toml now have to allow, and the colors the border manager keeps are the
themes' own again.
A subscriber that asks for the changes of the state only is sent a Theme message
all the same: the colors of the borders are not part of the state, so a theme
never changes it, and the subscriber would not hear of the colors at all.
komorebi.json takes border_colours, a color for each kind of window as red,
green and blue or as a hex color, and a theme, which wins over them.
The daemon takes its settings from a komorebi.json: the file --config names, or
the one in the config home ($KOMOREBI_CONFIG_HOME, else ~/.config/komorebi).
Without a file it runs on its defaults, as before.
StaticConfig reads the file in three steps, because the monitors are known only
after the backend has been asked. preload makes the window manager and applies
the settings that are process-wide, postload gives each monitor and workspace
the entry of its place (by the index display_index_preferences gives a monitor's
serial number id, else in order), and main asks KWin for a desktop for each
workspace the file lists. A watcher on the file sends the daemon a
ReloadStaticConfiguration about two seconds after it changes, whether an editor
wrote the file in place or renamed a new one over it, and a file that does not
parse changes nothing.
A workspace can change its layout, its work area offset and its layout options
with the number of its containers, from the file or with komorebic
(workspace-layout-rule, its named form and the two that clear), and
layout_defaults gives every workspace of a layout the options it sets none of.
One file is meant to serve every platform, so a key that does nothing on Plasma
is accepted and ignored. config_parity checks the example and the files of other
platforms; the keys of features that are not in yet are listed there, and the
test fails when a list names a key that is read.
The file also sets what the stacks, the float override, the floating layer and
monocle set while the daemon runs: window_container_behaviour, with its rules by
container count in a workspace, float_override, float_override_placement,
floating_layer_behaviour (for a monitor and a workspace too),
floating_layer_placement and monocle_focus_behaviour. Their features come before
this commit, but a file to put the keys in does not, so they are part of this
one.
komorebic gains configuration, generate-static-config and start --config. The
NixOS module gets configFile, which the unit gives the daemon as --config.
A program such as a status bar has to follow the window manager, and so far it
could only ask: komorebi on Windows and on macOS sends notifications for that.
The daemon now keeps subscribers, each a Unix socket in its data directory that
a program listens on, and after each event and each message it handles, it
connects to every subscriber and writes the event or the message with the state
after it.
A subscriber can ask to be sent only what changed the state; a window that is
shown and a new subscription are always sent, so a subscriber has the state as
soon as it subscribes. A subscriber that cannot be connected to is dropped with
its socket file and not tried again, and a stopping daemon closes an empty
connection to each one.
komorebic gains subscribe-socket and unsubscribe-socket, and komorebi-client
subscribe and subscribe_with_options, which bind the socket and subscribe. The
tests subscribe through real sockets against the fake desktop: a shown window is
sent with the state that has it, a subscriber that filters is not sent a
question that changed nothing, and one that is gone is dropped.